Add SNMP configuration to puppet.
Change-Id: I2fa3e43cbc52404e8c41d381e503abec42459873
This commit is contained in:
James E. Blair
commit
d7131c0eb4
|
|
@ -0,0 +1,195 @@
|
|||
# This file is managed by puppet.
|
||||
|
||||
###############################################################################
|
||||
#
|
||||
# EXAMPLE.conf:
|
||||
# An example configuration file for configuring the Net-SNMP agent ('snmpd')
|
||||
# See the 'snmpd.conf(5)' man page for details
|
||||
#
|
||||
# Some entries are deliberately commented out, and will need to be explicitly activated
|
||||
#
|
||||
###############################################################################
|
||||
#
|
||||
# AGENT BEHAVIOUR
|
||||
#
|
||||
|
||||
# Listen for connections from the local system only
|
||||
#agentAddress udp:127.0.0.1:161
|
||||
# Listen for connections on all interfaces (both IPv4 *and* IPv6)
|
||||
#agentAddress udp:161,udp6:[::1]:161
|
||||
|
||||
|
||||
|
||||
###############################################################################
|
||||
#
|
||||
# SNMPv3 AUTHENTICATION
|
||||
#
|
||||
# Note that these particular settings don't actually belong here.
|
||||
# They should be copied to the file /var/lib/snmp/snmpd.conf
|
||||
# and the passwords changed, before being uncommented in that file *only*.
|
||||
# Then restart the agent
|
||||
|
||||
# createUser authOnlyUser MD5 "remember to change this password"
|
||||
# createUser authPrivUser SHA "remember to change this one too" DES
|
||||
# createUser internalUser MD5 "this is only ever used internally, but still change the password"
|
||||
|
||||
# If you also change the usernames (which might be sensible),
|
||||
# then remember to update the other occurances in this example config file to match.
|
||||
|
||||
|
||||
|
||||
###############################################################################
|
||||
#
|
||||
# ACCESS CONTROL
|
||||
#
|
||||
|
||||
# system + hrSystem groups only
|
||||
view systemonly included .1.3.6.1.2.1.1
|
||||
view systemonly included .1.3.6.1.2.1.25.1
|
||||
|
||||
# Full access from the local host
|
||||
#rocommunity public localhost
|
||||
# Default access to basic system info
|
||||
rocommunity public default
|
||||
|
||||
# Full access from an example network
|
||||
# Adjust this network address to match your local
|
||||
# settings, change the community string,
|
||||
# and check the 'agentAddress' setting above
|
||||
#rocommunity secret 10.0.0.0/16
|
||||
|
||||
# Full read-only access for SNMPv3
|
||||
# rouser authOnlyUser
|
||||
# Full write access for encrypted requests
|
||||
# Remember to activate the 'createUser' lines above
|
||||
#rwuser authPrivUser priv
|
||||
|
||||
# It's no longer typically necessary to use the full 'com2sec/group/access' configuration
|
||||
# r[ou]user and r[ow]community, together with suitable views, should cover most requirements
|
||||
|
||||
|
||||
|
||||
###############################################################################
|
||||
#
|
||||
# SYSTEM INFORMATION
|
||||
#
|
||||
|
||||
# Note that setting these values here, results in the corresponding MIB objects being 'read-only'
|
||||
# See snmpd.conf(5) for more details
|
||||
sysLocation Sitting on the Dock of the Bay
|
||||
sysContact Me <me@example.org>
|
||||
# Application + End-to-End layers
|
||||
sysServices 72
|
||||
|
||||
|
||||
#
|
||||
# Process Monitoring
|
||||
#
|
||||
# At least one 'mountd' process
|
||||
proc mountd
|
||||
# No more than 4 'ntalkd' processes - 0 is OK
|
||||
proc ntalkd 4
|
||||
# At least one 'sendmail' process, but no more than 10
|
||||
proc sendmail 10 1
|
||||
|
||||
# Walk the UCD-SNMP-MIB::prTable to see the resulting output
|
||||
# Note that this table will be empty if there are no "proc" entries in the snmpd.conf file
|
||||
|
||||
|
||||
#
|
||||
# Disk Monitoring
|
||||
#
|
||||
# 10MBs required on root disk, 5% free on /var, 10% free on all other disks
|
||||
disk / 10000
|
||||
disk /var 5%
|
||||
includeAllDisks 10%
|
||||
|
||||
# Walk the UCD-SNMP-MIB::dskTable to see the resulting output
|
||||
# Note that this table will be empty if there are no "disk" entries in the snmpd.conf file
|
||||
|
||||
|
||||
#
|
||||
# System Load
|
||||
#
|
||||
# Unacceptable 1-, 5-, and 15-minute load averages
|
||||
load 12 10 5
|
||||
|
||||
# Walk the UCD-SNMP-MIB::laTable to see the resulting output
|
||||
# Note that this table *will* be populated, even without a "load" entry in the snmpd.conf file
|
||||
|
||||
|
||||
|
||||
###############################################################################
|
||||
#
|
||||
# ACTIVE MONITORING
|
||||
#
|
||||
|
||||
# send SNMPv1 traps
|
||||
# trapsink localhost public
|
||||
# send SNMPv2c traps
|
||||
#trap2sink localhost public
|
||||
# send SNMPv2c INFORMs
|
||||
#informsink localhost public
|
||||
|
||||
# Note that you typically only want *one* of these three lines
|
||||
# Uncommenting two (or all three) will result in multiple copies of each notification.
|
||||
|
||||
|
||||
#
|
||||
# Event MIB - automatically generate alerts
|
||||
#
|
||||
# Remember to activate the 'createUser' lines above
|
||||
#iquerySecName internalUser
|
||||
#rouser internalUser
|
||||
# generate traps on UCD error conditions
|
||||
#defaultMonitors yes
|
||||
# generate traps on linkUp/Down
|
||||
#linkUpDownNotifications yes
|
||||
|
||||
|
||||
|
||||
###############################################################################
|
||||
#
|
||||
# EXTENDING THE AGENT
|
||||
#
|
||||
|
||||
#
|
||||
# Arbitrary extension commands
|
||||
#
|
||||
# extend test1 /bin/echo Hello, world!
|
||||
# extend-sh test2 echo Hello, world! ; echo Hi there ; exit 35
|
||||
#extend-sh test3 /bin/sh /tmp/shtest
|
||||
|
||||
# Note that this last entry requires the script '/tmp/shtest' to be created first,
|
||||
# containing the same three shell commands, before the line is uncommented
|
||||
|
||||
# Walk the NET-SNMP-EXTEND-MIB tables (nsExtendConfigTable, nsExtendOutput1Table
|
||||
# and nsExtendOutput2Table) to see the resulting output
|
||||
|
||||
# Note that the "extend" directive supercedes the previous "exec" and "sh" directives
|
||||
# However, walking the UCD-SNMP-MIB::extTable should still returns the same output,
|
||||
# as well as the fuller results in the above tables.
|
||||
|
||||
|
||||
#
|
||||
# "Pass-through" MIB extension command
|
||||
#
|
||||
#pass .1.3.6.1.4.1.8072.2.255 /bin/sh PREFIX/local/passtest
|
||||
#pass .1.3.6.1.4.1.8072.2.255 /usr/bin/perl PREFIX/local/passtest.pl
|
||||
|
||||
# Note that this requires one of the two 'passtest' scripts to be installed first,
|
||||
# before the appropriate line is uncommented.
|
||||
# These scripts can be found in the 'local' directory of the source distribution,
|
||||
# and are not installed automatically.
|
||||
|
||||
# Walk the NET-SNMP-PASS-MIB::netSnmpPassExamples subtree to see the resulting output
|
||||
|
||||
|
||||
#
|
||||
# AgentX Sub-agents
|
||||
#
|
||||
# Run as an AgentX master agent
|
||||
# master agentx
|
||||
# Listen for network connections (from localhost)
|
||||
# rather than the default named socket /var/agentx/master
|
||||
#agentXSocket tcp:localhost:705
|
||||
|
|
@ -0,0 +1,15 @@
|
|||
class snmpd {
|
||||
package { snmpd: ensure => present }
|
||||
service { snmpd:
|
||||
ensure => running,
|
||||
hasrestart => true,
|
||||
}
|
||||
file { "/etc/snmp/snmpd.conf":
|
||||
owner => 'root',
|
||||
group => 'root',
|
||||
mode => 444,
|
||||
ensure => 'present',
|
||||
source => 'puppet:///modules/snmpd/snmpd.conf',
|
||||
replace => 'true',
|
||||
}
|
||||
}
|
||||
Loading…
Reference in New Issue