Python3 code compatibility: tox.ini checks v1

Add pep8-py34/35 (deprecation check & etc).
Add pylint with not ignored Python 3 incompatible warnings
Add documents test

Next: add full py34/35 check after modules compatibility fix

blueprint fuel-qa-python3-compatibility
Related-bug: #1556791

Change-Id: I65a540aad70bde73043ed36dca222f472f8fe108
This commit is contained in:
Alexey Stepanov 2016-03-09 13:50:50 +03:00
parent 8e330fd8e6
commit cdb190f01d
3 changed files with 868 additions and 1 deletions

400
.pylintrc Normal file
View File

@ -0,0 +1,400 @@
[MASTER]
# Specify a configuration file.
#rcfile=
# Python code to execute, usually for sys.path manipulation such as
# pygtk.require().
#init-hook=
# Add files or directories to the blacklist. They should be base names, not
# paths.
ignore=CVS, tox, logs
# Pickle collected data for later comparisons.
persistent=yes
# List of plugins (as comma separated values of python modules names) to load,
# usually to register additional checkers.
load-plugins=
# Use multiple processes to speed up Pylint.
jobs=1
# Allow loading of arbitrary C extensions. Extensions are imported into the
# active Python interpreter and may run arbitrary code.
unsafe-load-any-extension=no
# A comma-separated list of package or module names from where C extensions may
# be loaded. Extensions are loading into the active Python interpreter and may
# run arbitrary code
extension-pkg-whitelist=
# Allow optimization of some AST trees. This will activate a peephole AST
# optimizer, which will apply various small optimizations. For instance, it can
# be used to obtain the result of joining multiple strings with the addition
# operator. Joining a lot of strings can lead to a maximum recursion error in
# Pylint and this flag can prevent that. It has one side effect, the resulting
# AST will be different than the one from reality.
optimize-ast=no
[MESSAGES CONTROL]
# Only show warnings with the listed confidence levels. Leave empty to show
# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED
confidence=
# Enable the message, report, category or checker with the given id(s). You can
# either give multiple identifier separated by comma (,) or put this option
# multiple time. See also the "--disable" option for examples.
#enable=
# Disable the message, report, category or checker with the given id(s). You
# can either give multiple identifiers separated by comma (,) or put this
# option multiple times (only on the command line, not in the configuration
# file where it should appear only once).You can also use "--disable=all" to
# disable everything first and then reenable specific checks. For example, if
# you want to run only the similarities checker, you can use "--disable=all
# --enable=similarities". If you want to run only the classes checker, but have
# no Warning level messages displayed, use"--disable=all --enable=classes
# --disable=W"
# RP0401: External dependencies
# RP0402: Modules dependencies graph
# RP0801: Duplication
# R0801: Duplication
# deprecated-lambda (W0110)
# bad-builtin (W0141)
# redefined-outer-name (W0621)
# logging-format-interpolation (W1202)
# anomalous-backslash-in-string (W1401) - DO NOT ENABLE, INCORRECTLY PARSES REGEX
# broad-except (W0703)
# no-absolute-import (W1618):
# import missing `from __future__ import absolute_import` Used when an import is not accompanied by from __future__ import absolute_import (default behaviour in Python 3)
# bare-except (W0702)
# cell-var-from-loop (W0640)
# unused-argument (W0613)
# missing-docstring (C0111)
# misplaced-comparison-constant (C0122)
# fixme (W0511)
disable=RP0401,RP0402,RP0801,R0801,W0110,W0141,suppressed-message,W1618,W0621,W1202,W1401,W0703,W0702,C0111,W0640,C0122,W0511,W0613
[REPORTS]
# Set the output format. Available formats are text, parseable, colorized, msvs
# (visual studio) and html. You can also give a reporter class, eg
# mypackage.mymodule.MyReporterClass.
output-format=colorized
#output-format=parseable
# Put messages in a separate file for each module / package specified on the
# command line instead of printing them on stdout. Reports (if any) will be
# written in a file name "pylint_global.[txt|html]".
files-output=no
# Tells whether to display a full report or only the messages
reports=yes
# Python expression which should return a note less than 10 (10 is the highest
# note). You have access to the variables errors warning, statement which
# respectively contain the number of errors / warnings messages and the total
# number of statements analyzed. This is used by the global evaluation report
# (RP0004).
evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)
# Template used to display messages. This is a python new-style format string
# used to format the message information. See doc for all details
#msg-template=
[VARIABLES]
# Tells whether we should check for unused import in __init__ files.
init-import=no
# A regular expression matching the name of dummy variables (i.e. expectedly
# not used).
dummy-variables-rgx=_$|dummy
# List of additional names supposed to be defined in builtins. Remember that
# you should avoid to define new builtins when possible.
additional-builtins=
# List of strings which can identify a callback function by name. A callback
# name must start or end with one of those strings.
callbacks=cb_,_cb
[TYPECHECK]
# Tells whether missing members accessed in mixin class should be ignored. A
# mixin class is detected if its name ends with "mixin" (case insensitive).
ignore-mixin-members=yes
# List of module names for which member attributes should not be checked
# (useful for modules/projects where namespaces are manipulated during runtime
# and thus existing member attributes cannot be deduced by static analysis. It
# supports qualified module names, as well as Unix pattern matching.
ignored-modules=
# List of classes names for which member attributes should not be checked
# (useful for classes with attributes dynamically set). This supports can work
# with qualified names.
ignored-classes=
# List of members which are set dynamically and missed by pylint inference
# system, and so shouldn't trigger E1101 when accessed. Python regular
# expressions are accepted.
generated-members=
[SPELLING]
# Spelling dictionary name. Available dictionaries: none. To make it working
# install python-enchant package.
spelling-dict=
# List of comma separated words that should not be checked.
spelling-ignore-words=
# A path to a file that contains private dictionary; one word per line.
spelling-private-dict-file=
# Tells whether to store unknown words to indicated private dictionary in
# --spelling-private-dict-file option instead of raising a message.
spelling-store-unknown-words=no
[SIMILARITIES]
# Minimum lines number of a similarity.
min-similarity-lines=10
# Ignore comments when computing similarities.
ignore-comments=yes
# Ignore docstrings when computing similarities.
ignore-docstrings=yes
# Ignore imports when computing similarities.
ignore-imports=no
[MISCELLANEOUS]
# List of note tags to take in consideration, separated by a comma.
notes=FIXME,XXX,TODO
[LOGGING]
# Logging modules to check that the string format arguments are in logging
# function parameter format
logging-modules=logging
[FORMAT]
# Maximum number of characters on a single line.
max-line-length=80
# Regexp for a line that is allowed to be longer than the limit.
ignore-long-lines=^\s*(# )?<?https?://\S+>?$
# Allow the body of an if to be on the same line as the test if there is no
# else.
single-line-if-stmt=no
# List of optional constructs for which whitespace checking is disabled. `dict-
# separator` is used to allow tabulation in dicts, etc.: {1 : 1,\n222: 2}.
# `trailing-comma` allows a space between comma and closing bracket: (a, ).
# `empty-line` allows space-only lines.
no-space-check=trailing-comma,dict-separator
# Maximum number of lines in a module
max-module-lines=1500
# String used as indentation unit. This is usually " " (4 spaces) or "\t" (1
# tab).
indent-string=' '
# Number of spaces of indent required inside a hanging or continued line.
indent-after-paren=4
# Expected format of line ending, e.g. empty (any line ending), LF or CRLF.
expected-line-ending-format=
[BASIC]
# List of builtins function names that should not be used, separated by a comma
bad-functions=map,filter,input
# Good variable names which should always be accepted, separated by a comma
good-names=i,j,k,ex,Run,_,x,e,ip
# Bad variable names which should always be refused, separated by a comma
bad-names=foo,bar,baz,toto,tutu,tata
# Colon-delimited sets of names that determine each other's naming style when
# the name regexes allow several styles.
name-group=
# Include a hint for the correct naming format with invalid-name
include-naming-hint=no
# Regular expression matching correct function names
function-rgx=[a-z_][a-z0-9_]{2,30}$
# Naming hint for function names
function-name-hint=[a-z_][a-z0-9_]{2,30}$
# Regular expression matching correct variable names
variable-rgx=[a-z_][a-z0-9_]{2,30}$
# Naming hint for variable names
variable-name-hint=[a-z_][a-z0-9_]{2,30}$
# Regular expression matching correct constant names
const-rgx=(([A-Z_][A-Z0-9_]*)|(__.*__))$
# Naming hint for constant names
const-name-hint=(([A-Z_][A-Z0-9_]*)|(__.*__))$
# Regular expression matching correct attribute names
attr-rgx=[a-z_][a-z0-9_]{2,30}$
# Naming hint for attribute names
attr-name-hint=[a-z_][a-z0-9_]{2,30}$
# Regular expression matching correct argument names
argument-rgx=[a-z_][a-z0-9_]{2,30}$
# Naming hint for argument names
argument-name-hint=[a-z_][a-z0-9_]{2,30}$
# Regular expression matching correct class attribute names
class-attribute-rgx=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$
# Naming hint for class attribute names
class-attribute-name-hint=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$
# Regular expression matching correct inline iteration names
inlinevar-rgx=[A-Za-z_][A-Za-z0-9_]*$
# Naming hint for inline iteration names
inlinevar-name-hint=[A-Za-z_][A-Za-z0-9_]*$
# Regular expression matching correct class names
class-rgx=[A-Z_][a-zA-Z0-9]+$
# Naming hint for class names
class-name-hint=[A-Z_][a-zA-Z0-9]+$
# Regular expression matching correct module names
module-rgx=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$
# Naming hint for module names
module-name-hint=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$
# Regular expression matching correct method names
method-rgx=[a-z_][a-z0-9_]{2,30}$
# Naming hint for method names
method-name-hint=[a-z_][a-z0-9_]{2,30}$
# Regular expression which should only match function or class names that do
# not require a docstring.
no-docstring-rgx=^_
# Minimum line length for functions/classes that require docstrings, shorter
# ones are exempt.
docstring-min-length=-1
[ELIF]
# Maximum number of nested blocks for function / method body
max-nested-blocks=5
[IMPORTS]
# Deprecated modules which should not be used, separated by a comma
deprecated-modules=regsub,TERMIOS,Bastion,rexec
# Create a graph of every (i.e. internal and external) dependencies in the
# given file (report RP0402 must not be disabled)
import-graph=
# Create a graph of external dependencies in the given file (report RP0402 must
# not be disabled)
ext-import-graph=
# Create a graph of internal dependencies in the given file (report RP0402 must
# not be disabled)
int-import-graph=
[DESIGN]
# Maximum number of arguments for function / method
max-args=10
# Argument names that match this expression will be ignored. Default to name
# with leading underscore
ignored-argument-names=_.*
# Maximum number of locals for function / method body
max-locals=15
# Maximum number of return / yield for function / method body
max-returns=6
# Maximum number of branch for function / method body
max-branches=12
# Maximum number of statements in function / method body
max-statements=50
# Maximum number of parents for a class (see R0901).
max-parents=7
# Maximum number of attributes for a class (see R0902).
max-attributes=15
# Minimum number of public methods for a class (see R0903).
min-public-methods=2
# Maximum number of public methods for a class (see R0904).
max-public-methods=20
# Maximum number of boolean expressions in a if statement
max-bool-expr=5
[CLASSES]
# List of method names used to declare (i.e. assign) instance attributes.
defining-attr-methods=__init__,__new__,setUp
# List of valid names for the first argument in a class method.
valid-classmethod-first-arg=cls
# List of valid names for the first argument in a metaclass class method.
valid-metaclass-classmethod-first-arg=mcs
# List of member names, which should be excluded from the protected access
# warning.
exclude-protected=_asdict,_fields,_replace,_source,_make
[EXCEPTIONS]
# Exceptions that will emit a warning when being caught. Defaults to
# "Exception"
overgeneral-exceptions=Exception

419
.pylintrc_gerrit Normal file
View File

@ -0,0 +1,419 @@
[MASTER]
# Specify a configuration file.
#rcfile=
# Python code to execute, usually for sys.path manipulation such as
# pygtk.require().
#init-hook=
# Add files or directories to the blacklist. They should be base names, not
# paths.
ignore=CVS, tox, logs
# Pickle collected data for later comparisons.
persistent=yes
# List of plugins (as comma separated values of python modules names) to load,
# usually to register additional checkers.
load-plugins=
# Use multiple processes to speed up Pylint.
jobs=1
# Allow loading of arbitrary C extensions. Extensions are imported into the
# active Python interpreter and may run arbitrary code.
unsafe-load-any-extension=no
# A comma-separated list of package or module names from where C extensions may
# be loaded. Extensions are loading into the active Python interpreter and may
# run arbitrary code
extension-pkg-whitelist=
# Allow optimization of some AST trees. This will activate a peephole AST
# optimizer, which will apply various small optimizations. For instance, it can
# be used to obtain the result of joining multiple strings with the addition
# operator. Joining a lot of strings can lead to a maximum recursion error in
# Pylint and this flag can prevent that. It has one side effect, the resulting
# AST will be different than the one from reality.
optimize-ast=no
[MESSAGES CONTROL]
# Only show warnings with the listed confidence levels. Leave empty to show
# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED
confidence=
# Enable the message, report, category or checker with the given id(s). You can
# either give multiple identifier separated by comma (,) or put this option
# multiple time. See also the "--disable" option for examples.
#enable=
# Disable the message, report, category or checker with the given id(s). You
# can either give multiple identifiers separated by comma (,) or put this
# option multiple times (only on the command line, not in the configuration
# file where it should appear only once).You can also use "--disable=all" to
# disable everything first and then reenable specific checks. For example, if
# you want to run only the similarities checker, you can use "--disable=all
# --enable=similarities". If you want to run only the classes checker, but have
# no Warning level messages displayed, use"--disable=all --enable=classes
# --disable=W"
# Disabling pointless reports:
# RP0401: External dependencies
# RP0402: Modules dependencies graph
# RP0801: Duplication
# R0801: Duplication
# Disabling messages:
# pointless-string-statement (W0105)
# unnecessary-lambda (W0108)
# deprecated-lambda (W0110)
# bad-builtin (W0141)
# protected-access (W0212)
# fixme (W0511)
# unused-argument (W0613)
# redefined-outer-name (W0621)
# cell-var-from-loop (W0640)
# bare-except (W0702)
# broad-except (W0703)
# logging-format-interpolation (W1202)
# anomalous-backslash-in-string (W1401) - DO NOT ENABLE, INCORRECTLY PARSES REGEX
# no-absolute-import (W1618):
# import missing `from __future__ import absolute_import` Used when an import is not accompanied by from __future__ import absolute_import (default behaviour in Python 3)
# invalid-name (C0103)
# missing-docstring (C0111)
# misplaced-comparison-constant (C0122)
# too-many-lines (C0302)
# bad-continuation (C0330)
# too-many-ancestors (R0901)
# too-many-public-methods (R0904)
# too-few-public-methods (R0903)
# too-many-return-statements (R0911)
# too-many-branches (R0912)
# too-many-arguments (R0913)
# too-many-locals (R0914)
# too-many-statements (R0915)
# suppressed-message (I0020)
disable=RP0401,RP0402,RP0801,R0801,W0110,W0141,W1618,W0621,W1202,W1401,W0703,W0702,C0111,W0640,C0122,W0511, W0613, C0103, R0903, C0330, W0212, C0302, R0915, R0914, R0912, W0105, R0904, R0911, W0108, R0913, R0901
[REPORTS]
# Set the output format. Available formats are text, parseable, colorized, msvs
# (visual studio) and html. You can also give a reporter class, eg
# mypackage.mymodule.MyReporterClass.
output-format=text
#output-format=parseable
# Put messages in a separate file for each module / package specified on the
# command line instead of printing them on stdout. Reports (if any) will be
# written in a file name "pylint_global.[txt|html]".
files-output=no
# Tells whether to display a full report or only the messages
reports=yes
# Python expression which should return a note less than 10 (10 is the highest
# note). You have access to the variables errors warning, statement which
# respectively contain the number of errors / warnings messages and the total
# number of statements analyzed. This is used by the global evaluation report
# (RP0004).
evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)
# Template used to display messages. This is a python new-style format string
# used to format the message information. See doc for all details
#msg-template=
[VARIABLES]
# Tells whether we should check for unused import in __init__ files.
init-import=no
# A regular expression matching the name of dummy variables (i.e. expectedly
# not used).
dummy-variables-rgx=_$|dummy
# List of additional names supposed to be defined in builtins. Remember that
# you should avoid to define new builtins when possible.
additional-builtins=
# List of strings which can identify a callback function by name. A callback
# name must start or end with one of those strings.
callbacks=cb_,_cb
[TYPECHECK]
# Tells whether missing members accessed in mixin class should be ignored. A
# mixin class is detected if its name ends with "mixin" (case insensitive).
ignore-mixin-members=yes
# List of module names for which member attributes should not be checked
# (useful for modules/projects where namespaces are manipulated during runtime
# and thus existing member attributes cannot be deduced by static analysis. It
# supports qualified module names, as well as Unix pattern matching.
ignored-modules=
# List of classes names for which member attributes should not be checked
# (useful for classes with attributes dynamically set). This supports can work
# with qualified names.
ignored-classes=
# List of members which are set dynamically and missed by pylint inference
# system, and so shouldn't trigger E1101 when accessed. Python regular
# expressions are accepted.
generated-members=
[SPELLING]
# Spelling dictionary name. Available dictionaries: none. To make it working
# install python-enchant package.
spelling-dict=
# List of comma separated words that should not be checked.
spelling-ignore-words=
# A path to a file that contains private dictionary; one word per line.
spelling-private-dict-file=
# Tells whether to store unknown words to indicated private dictionary in
# --spelling-private-dict-file option instead of raising a message.
spelling-store-unknown-words=no
[SIMILARITIES]
# Minimum lines number of a similarity.
min-similarity-lines=10
# Ignore comments when computing similarities.
ignore-comments=yes
# Ignore docstrings when computing similarities.
ignore-docstrings=yes
# Ignore imports when computing similarities.
ignore-imports=no
[MISCELLANEOUS]
# List of note tags to take in consideration, separated by a comma.
notes=FIXME,XXX,TODO
[LOGGING]
# Logging modules to check that the string format arguments are in logging
# function parameter format
logging-modules=logging
[FORMAT]
# Maximum number of characters on a single line.
max-line-length=80
# Regexp for a line that is allowed to be longer than the limit.
ignore-long-lines=^\s*(# )?<?https?://\S+>?$
# Allow the body of an if to be on the same line as the test if there is no
# else.
single-line-if-stmt=no
# List of optional constructs for which whitespace checking is disabled. `dict-
# separator` is used to allow tabulation in dicts, etc.: {1 : 1,\n222: 2}.
# `trailing-comma` allows a space between comma and closing bracket: (a, ).
# `empty-line` allows space-only lines.
no-space-check=trailing-comma,dict-separator
# Maximum number of lines in a module
max-module-lines=1500
# String used as indentation unit. This is usually " " (4 spaces) or "\t" (1
# tab).
indent-string=' '
# Number of spaces of indent required inside a hanging or continued line.
indent-after-paren=4
# Expected format of line ending, e.g. empty (any line ending), LF or CRLF.
expected-line-ending-format=
[BASIC]
# List of builtins function names that should not be used, separated by a comma
bad-functions=map,filter,input
# Good variable names which should always be accepted, separated by a comma
good-names=i,j,k,ex,Run,_,x,e,ip
# Bad variable names which should always be refused, separated by a comma
bad-names=foo,bar,baz,toto,tutu,tata
# Colon-delimited sets of names that determine each other's naming style when
# the name regexes allow several styles.
name-group=
# Include a hint for the correct naming format with invalid-name
include-naming-hint=no
# Regular expression matching correct function names
function-rgx=[a-z_][a-z0-9_]{2,30}$
# Naming hint for function names
function-name-hint=[a-z_][a-z0-9_]{2,30}$
# Regular expression matching correct variable names
variable-rgx=[a-z_][a-z0-9_]{2,30}$
# Naming hint for variable names
variable-name-hint=[a-z_][a-z0-9_]{2,30}$
# Regular expression matching correct constant names
const-rgx=(([A-Z_][A-Z0-9_]*)|(__.*__))$
# Naming hint for constant names
const-name-hint=(([A-Z_][A-Z0-9_]*)|(__.*__))$
# Regular expression matching correct attribute names
attr-rgx=[a-z_][a-z0-9_]{2,30}$
# Naming hint for attribute names
attr-name-hint=[a-z_][a-z0-9_]{2,30}$
# Regular expression matching correct argument names
argument-rgx=[a-z_][a-z0-9_]{2,30}$
# Naming hint for argument names
argument-name-hint=[a-z_][a-z0-9_]{2,30}$
# Regular expression matching correct class attribute names
class-attribute-rgx=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$
# Naming hint for class attribute names
class-attribute-name-hint=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$
# Regular expression matching correct inline iteration names
inlinevar-rgx=[A-Za-z_][A-Za-z0-9_]*$
# Naming hint for inline iteration names
inlinevar-name-hint=[A-Za-z_][A-Za-z0-9_]*$
# Regular expression matching correct class names
class-rgx=[A-Z_][a-zA-Z0-9]+$
# Naming hint for class names
class-name-hint=[A-Z_][a-zA-Z0-9]+$
# Regular expression matching correct module names
module-rgx=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$
# Naming hint for module names
module-name-hint=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$
# Regular expression matching correct method names
method-rgx=[a-z_][a-z0-9_]{2,30}$
# Naming hint for method names
method-name-hint=[a-z_][a-z0-9_]{2,30}$
# Regular expression which should only match function or class names that do
# not require a docstring.
no-docstring-rgx=^_
# Minimum line length for functions/classes that require docstrings, shorter
# ones are exempt.
docstring-min-length=-1
[ELIF]
# Maximum number of nested blocks for function / method body
max-nested-blocks=5
[IMPORTS]
# Deprecated modules which should not be used, separated by a comma
deprecated-modules=regsub,TERMIOS,Bastion,rexec
# Create a graph of every (i.e. internal and external) dependencies in the
# given file (report RP0402 must not be disabled)
import-graph=
# Create a graph of external dependencies in the given file (report RP0402 must
# not be disabled)
ext-import-graph=
# Create a graph of internal dependencies in the given file (report RP0402 must
# not be disabled)
int-import-graph=
[DESIGN]
# Maximum number of arguments for function / method
max-args=10
# Argument names that match this expression will be ignored. Default to name
# with leading underscore
ignored-argument-names=_.*
# Maximum number of locals for function / method body
max-locals=15
# Maximum number of return / yield for function / method body
max-returns=6
# Maximum number of branch for function / method body
max-branches=12
# Maximum number of statements in function / method body
max-statements=50
# Maximum number of parents for a class (see R0901).
max-parents=7
# Maximum number of attributes for a class (see R0902).
max-attributes=15
# Minimum number of public methods for a class (see R0903).
min-public-methods=2
# Maximum number of public methods for a class (see R0904).
max-public-methods=20
# Maximum number of boolean expressions in a if statement
max-bool-expr=5
[CLASSES]
# List of method names used to declare (i.e. assign) instance attributes.
defining-attr-methods=__init__,__new__,setUp
# List of valid names for the first argument in a class method.
valid-classmethod-first-arg=cls
# List of valid names for the first argument in a metaclass class method.
valid-metaclass-classmethod-first-arg=mcs
# List of member names, which should be excluded from the protected access
# warning.
exclude-protected=_asdict,_fields,_replace,_source,_make
[EXCEPTIONS]
# Exceptions that will emit a warning when being caught. Defaults to
# "Exception"
overgeneral-exceptions=Exception

50
tox.ini
View File

@ -5,7 +5,8 @@
[tox]
skipsdist = True
envlist = pep8, py27
envlist = pep8, py27, pylint, docs, pep8-py{34,35}, pylint-py{27}-{fuelweb,system,gates}
skip_missing_interpreters = True
[testenv]
deps = -r{toxinidir}/fuelweb_test/requirements.txt
@ -20,9 +21,56 @@ usedevelop = False
commands =
flake8 {posargs:.}
[testenv:pep8-py34]
# TODO: #deps = hacking==0.7
deps = flake8
usedevelop = False
commands =
flake8 {posargs:.}
[testenv:pep8-py35]
# TODO: #deps = hacking==0.7
deps = flake8
usedevelop = False
commands =
flake8 {posargs:.}
[flake8]
ignore = H302,H802
exclude = .venv,.git,.tox,dist,doc,*egg,build
show-pep8 = True
show-source = True
count = True
[testenv:pylint]
deps=
-r{toxinidir}/fuelweb_test/requirements.txt
pylint
commands=
pylint --rcfile=.pylintrc_gerrit fuelweb_test system_test gates_tests
[testenv:pylint-py27-fuelweb]
deps=
-r{toxinidir}/fuelweb_test/requirements.txt
pylint
commands=pylint fuelweb_test
[testenv:pylint-py27-system]
deps=
-r{toxinidir}/fuelweb_test/requirements.txt
pylint
commands=pylint system_test
[testenv:pylint-py27-gates]
deps=
-r{toxinidir}/fuelweb_test/requirements.txt
pylint
commands=pylint gates_tests
[testenv:docs]
changedir = doc
deps =
-r{toxinidir}/fuelweb_test/requirements.txt
sphinx
commands = sphinx-build -b html -d _build/doctrees . _build/html