Adds the needed changes and configurations in
order to use the neutron plugin, tap-as-a-service,
to create port mirrors using `openstack tap` commands.
Implements: configure-taas-plugin
Depends-On: https://review.opendev.org/c/openstack/kolla/+/885151
Change-Id: Ia09e1f8b423d43c0466fe2d6605ce383fd813544
Signed-off-by: Juan Pablo Suazo <jsuazo@whitestack.com>
This key can be used by users in networking-generic-switch
scenario instead of adding cleartext password in ml2_conf.ini.
Change-Id: I10003e6526a55a97f22678ab81c411e4645c5157
NSXP is the OpenStack support for the NSX Policy platform.
This is supported from neutron in the Stein version. This patch
adds Kolla support
This adds a new neutron_plugin_agent type 'vmware_nsxp'. The plugin
does not run any neutron agents.
Change-Id: I9e9d8f07e586bdc143d293e572031368af7f3fca
Config plays do not need to check containers. This avoids skipping
tasks during the genconfig action.
Ironic and Glance rolling upgrades are handled specially.
Swift and Bifrost do not use the handlers at all.
Partially-Implements: blueprint performance-improvements
Change-Id: I140bf71d62e8f0932c96270d1f08940a5ba4542a
Add TLS support for backend Neutron API Server communication using
HAProxy to perform TLS termination. When used in conjunction with
enabling TLS for service API endpoints, network communication will be
encrypted end to end, from client through HAProxy to the Neutron
service.
Change-Id: Ib333a1f1bd12491df72a9e52d961161210e2d330
Partially-Implements: blueprint add-ssl-internal-network
Including tasks has a performance penalty when compared with importing
tasks. If the include has a condition associated with it, then the
overhead of the include may be lower than the overhead of skipping all
imported tasks. In the case of the check-containers.yml include, the
included file only has a single task, so the overhead of skipping this
task will not be greater than the overhead of the task import. It
therefore makes sense to switch to use import_tasks there.
Partially-Implements: blueprint performance-improvements
Change-Id: I65d911670649960708b9f6a4c110d1a7df1ad8f7
Refactor service configuration to use the copy certificates task. This
reduces code duplication and simplifies implementing encrypting backend
HAProxy traffic for individual services.
Change-Id: I0474324b60a5f792ef5210ab336639edf7a8cd9e
Currently there are a few services that perform host configuration
tasks. This is done in config.yml. This means that these changes are
performed during 'kolla-ansible genconfig', when we might expect not to
be making any changes to the remote system.
This change separates out these host configuration tasks into a
config-host.yml file, which is included directly from deploy.yml.
One change in behaviour is that this prevents these tasks from running
during an upgrade or genconfig. This is probably what we want, but we
should be careful when any of these host configuration tasks are
changed, to ensure they are applied during an upgrade if necessary.
Change-Id: I001defc75d1f1e6caa9b1e11246abc6ce17c775b
Closes-Bug: #1860161
When change the cert file in /etc/kolla/certificate/.
The certificate in the container has not changed.
So I think can use kolla-ansible deploy when certificate is
changed. restart <container>
Partially-Implements: blueprint custom-cacerts
Change-Id: Iaac6f37e85ffdc0352e8062ae5049cc9a6b3db26
Signed-off-by: yj.bai <bai.yongjun@99cloud.net>
Both include_role and import_role expect role's name to be given
via "name" param instead of "role".
This worked but caused errors with ansible-lint.
See: https://review.opendev.org/694779
Change-Id: I388d4ae27111e430d38df1abcb6c6127d90a06e0
When kolla_copy_ca_into_containers is set to "yes", the Certificate
Authority in /etc/kolla/certificates will be copied into service
containers to enable trust for that CA. This is especially useful when
the CA is self signed, and would not be trusted by default.
Partially-Implements: blueprint custom-cacerts
Change-Id: I4368f8994147580460ebe7533850cf63a419d0b4
As part of the effort to implement Ansible code linting in CI
(using ansible-lint) - we need to implement recommendations from
ansible-lint output [1].
One of them is to stop using local_action in favor of delegate_to -
to increase readability and and match the style of typical ansible
tasks.
[1]: https://review.opendev.org/694779/
Partially implements: blueprint ansible-lint
Change-Id: I46c259ddad5a6aaf9c7301e6c44cd8a1d5c457d3
Sometimes as cloud admins, we want to only update code that is running
in a cloud. But we dont need to do anything else. Make an action in
kolla-ansible that allows us to do that.
Change-Id: I904f595c69f7276e71692696471e32fd1f88e6e8
Implements: blueprint deploy-containers-action
Currently, we have a lot of logic for checking if a handler should run,
depending on whether config files have changed and whether the
container configuration has changed. As rm_work pointed out during
the recent haproxy refactor, these conditionals are typically
unnecessary - we can rely on Ansible's handler notification system
to only trigger handlers when they need to run. This removes a lot
of error prone code.
This patch removes conditional handler logic for all services. It is
important to ensure that we no longer trigger handlers when unnecessary,
because without these checks in place it will trigger a restart of the
containers.
Implements: blueprint simplify-handlers
Change-Id: I4f1aa03e9a9faaf8aecd556dfeafdb834042e4cd
The project has been retired and there will be no Train release [1].
This patch removes Neutron LBaaS support in Kolla.
[1] https://review.opendev.org/#/c/658494/
Change-Id: Ic0d3da02b9556a34d8c27ca21a1ebb3af1f5d34c
Several config file permissions are incorrect on the host. In general,
files should be 0660, and directories and executables 0770.
Change-Id: Id276ac1864f280554e98b937f2845bb424d521de
Closes-Bug: #1821579
The neutron containers were not being restarted if only the ml2_conf.ini
file is changed. This is due to the XenAPI ml2_conf.ini config task
registering a variable of the same name as the task that generates
ml2_conf.ini for other services. Since the XenAPI service is typically
not running, the tasks show as not changed, and the handler skips
restarting the container.
This change adds a second variable for XenAPI to avoid this shadowing.
Change-Id: I77819ed8defb8a7653e1e5aec92013b1d40fbf02
Closes-Bug: #1783268
This commit is to apply resource-constraints to a few more OpenStack services.
Commit to apply constraints to the last set of services will be made in
the upcoming commit.
Depends-on: Icafa54baca24d2de64238222a5677b9d8b90e2aa
Change-Id: I39004f54281f97d53dfa4b1dbcf248650ad6f186
Enables setting rp_filter mode on Neutron L3 agent and Nova compute
hosts whilst maintaining the default that it is disabled.
Closes-Bug: #1782799
Change-Id: I93e53bad9727beb786b00bd7fcd6d78785c619c2
Add become to all tasks that use the module "kolla_docker"
Change-Id: I4309c4011687b88ec31d739fd8f834fe2326ff10
Partial-Implements: blueprint ansible-specific-task-become
NSXV3 is the OpenStack support for the NSX Transformers platform.
This is supported from neutron in the Mitaka version. This patch
adds Kolla support
This adds a new neutron_plugin_agent type 'vmware_nsxv3'. The plugin
does not run any neutron agents.
Change-Id: I1ecd7e5f3471e4ff03cfe8c9a3aff17af3fe1842
- rename action and serial to kolla_ansible and kolla_serial
- use become instead of "sudo <command>" in shell
- Remove quota for failed_when and changed_when in rabbitmq tasks
Change-Id: I78cb60168aaa40bb6439198283546b7faf33917c
Implements: blueprint migrate-to-ansible-2-2-0
As neutron-vpnaas-agent has been loaded just inside of the existing l3 agent
rather than requiring operators to run a completely different binary with a
subclass of the existing L3 agent[1]. We need restructure this role to fit
with this new feature.
[1] https://review.openstack.org/488247
Depends-On: I47cd8ba5a14da3c76d5b1eb0b4c0cf0c729eb2ff
Change-Id: Id690a652bc9facf1c3e39358f548ab7ddd967d80
Implements: blueprint restructure-neutron-vpnaas
Closes-Bug: #1731498
This patch allows configuration of the Infoblox
pluggable IPAM driver in neutron [0].
When 'infoblox' is chosen as the driver, an Infoblox
IPAM agent can be started as well. The agent
allows for enhanced DNS capabilities by listening
for neutron and nova notifications.
[0] https://github.com/openstack/networking-infoblox/blob/master/README.rst
Change-Id: I4f863750a7806a7b6eaf13900d44e5f063afe3de
Depends-On: Ia44f0e0d7a0d60cebf0857ad51700e02eba5099b
Partially-Implements: blueprint neutron-ipam-driver-infoblox
This patchset implements yamllint test to all *.yml
files.
Also fixes syntax errors to make jobs to pass.
Change-Id: I3186adf9835b4d0cada272d156b17d1bc9c2b799
howardlee