Fixes a hypothetical security issue related to privilege escalation via
rootwrap/privsep. A potential vulnerable service could previously allow
writes to its rootwrap/privsep config and thus allow for more commands
to be run with root privileges via rootwrap/privsep. For a succesful
attack, this would also require the service to allow to run arbitrary
commands via rootwrap/privsep. Thus far, no such vulnerabilities have
been reported and thus this fix is simply strengthening the container
images against such an issue in the future.
Change-Id: I92c81c77e6a16570a108cde8031f7977930fb02a
Closes-Bug: #1874298
Tim Shearer started it in 1d96a2bbe1.
Since all extend_start files are sourced rather than executed, the executable
bits are now cleared throughout the project.
Change-Id: Ia1797c32fc6a35f9f077c673abf4d8e16e51a760
As we have one type of images now some RUN calls could be merged so we
will have less layers in resulting images.
Change-Id: I5178c58fbd8c65efe825dc249c0f1368ef0fe8e0
Explicitly set the permissions on the kolla-toolbox kolla_extend_start
file. Also, since all extend_start files are sourced rather than
executed, the executable bits are now cleared throughout the project.
Change-Id: I5c2deb4a2e33575d57c852089f856a9acc6818d0
Big patch drops all mentions of binary images support. Suggestions are
welcome how to split it into parts or handle better.
Change-Id: I5d5a46c6ce7734ceb8b844e17b43e359d7cac6e3
boto3 library is needed [1] for glance_store and didn't installed yet
since [2] adds s3 support back. this change adds both binary and source
parts to install boto3 library.
1. 04e5ead7c0/setup.cfg (L76)
2. I203134837319080ead96da69048baf90086d2117
Closes-Bug: #1884259
Change-Id: I199185e24cedd2e282c53460a24aeffc83478a12
Signed-off-by: Maksim Malchuk <maksim.malchuk@gmail.com>
glance-registry service was deprecated in Queens release and has been
removed in Victoria [1].
[1] https://review.opendev.org/#/c/738671/
Change-Id: I0d8695fde2a70509c7535d0d582136c0b0e7667b
With the move to RHEL/CentOS 8 we no longer have Python 2 in our images
so there is no need for checking which Python version (2.x or 3.x) is
used inside of containers.
We also no longer have to support yum as a value for
distro_package_manager.
Partially-Implements: blueprint centos-rhel-8
Change-Id: Ie45cf3465fedddbde7856961527421883ba3d5c9
This fixes usage of cinder as glance backend.
Glance API source containers were missing both sudoers and
rootwrap config. rootwrap config gets included in Kolla
because otherwise it is clunky to get it from glance_store
where it lives. The positive side is that it has not
changed since July 2016.
Debian/Ubuntu binary have weird double-glance path to
rootwrap which gets fixed now by symbolic link.
Closes-bug: #1869072
Change-Id: Ia53657a415249882b93acca86b5e2a3bfa167820
Glance API image lacked nfs programs/utils to be able to mount
NFS exports.
This affected Glance usage with Cinder backend when NFS was used
as Cinder backend.
Closes-Bug: #1868574
Change-Id: I3aac1e6a7f7c5f839b036f15713af949fba206cc
Storage SIG has built Ceph Nautilus and Ganesha for CentOS8 in CentOS
Build System.
Let's switch to use them in kolla.
Change-Id: Id37dca84c4eb918aaf2d3c036ef5387fe75988dd
The only Ceph version that will support CentOS 8 is Octopus.
It will be released end of March 2020 - so for now let's use master.
Change-Id: I5955acb41e7346802d76f4f2b244cbf5c36f5bf2
Partially-Implements: blueprint centos-rhel-8
* Some further changes for python2 vs python3 packages
* Allow rabbitmq 3.7.*, since a newer erlang is available
* Switch from qemu-img-ev to qemu-img on CentOS 8
* bridge-utils no longer available on CentOS 8
* libvirt-daemon-driver-lxc no longer available on CentOS 8
* Mark some more images buildable for CentOS 8
Change-Id: Iaf5b68ff6d944ae730ca0b1d5832172c106a6c08
Partially-Implements: blueprint centos-rhel-8
Partially-Implements: blueprint centos-rhel-python-3
Disable external repositories by default and enable only when needed.
Depends-on: https://review.opendev.org/696480
Implements: blueprint repos-off-by-default
Change-Id: Icf2a8397a8349e0fe849d88d160409fd234480a9
backport: Stein
During the switch to Stein UCA, we did not switch all packages to python
3 for Debian/Ubuntu binary images. This change switches some more of
those packages.
Change-Id: I0bff21384d88ea678608392de2db1ba418c96665
Co-Authored-By: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Commit 43b74ccc15 enabled use of Python 3
based packages but not switched to use Python 3.
Some of images still contain Python 2. There are two reasons:
- Ceph (ceph-common depends on Py2)
- python3-ldappool on Ubuntu 18.04
In Ceph situation Py3 packages were added. For second one we can not do
anything - Py2 dependency got dropped in Ubuntu 18.10 version.
Removed neutron-server-plugin-networking-infoblox due to being not
maintained. Once https://review.opendev.org/#/c/657578/ get merged
someone may revert that part.
Implements: blueprint debian-ubuntu-python3
Depends-on: Ie2a1077f7def0743f1403341985e2109aa490026
Change-Id: Ibfe0c2b8be98db56c61f74fb0247488ab3749ef4
RDO is currently working on python3 support for the next version of
CentOS/RHEL based systems. This package uses the distro_python3 flag
that was added as part of I4028991bad92c0e8e21066cc4173c06ce5eba393 to
use the python3 specific package names. This change only adds python3
package names for RHEL systems.
Conflicts-With: https://review.openstack.org/#/c/636457/
Change-Id: Iad6b70b433a0dd1b0f8ae6790fd280594517661a
Related-Blueprint: python3-support
This change updates the docker files to use base_package_type instead
of doing specific distro checks for the rhel/deb generic cases. The
base_distro is still available and is used when a specific distro needs
a customization but if the differences are purely rpm vs deb, then the
base_package_type can be used.
Change-Id: I8d720bb185df65a0178061ccf20b1ab2265da2c5
qemu-kvm-ev was used with centos,
in case of rhel when you have
access to the virtualisation related channels qemu-kvm pulls
qemu-kvm-rhev which is the recommended one.
qemu-kvm-ev was referenced by devstack long time ago,
but the explicit package install on rhel family today
is qemu-kvm and not qemu-kvm-ev.
I am unsure about the other distros, so just changing rhel.
Change-Id: If6d1e0367730fa80284395be33674a7cd1465389
These packages produce a warning during the installation, we should
switch to their new names, usually to be specific about their use of
python2.
Change-Id: I0a80e822f64222d9a32aabd1fd834bcf794d6320
set_configs.py has logic to handle chown of directories. Simplify
the codebase by removing these unnessary chowns. Further the chowns
cause some forms of NFS backed storage to not work properly.
Change-Id: I8df95d06b1010778deb3e2a3065aaab26ed2eb6a
Closes-Bug: #1693973
centos based images have wrong label info,
these changes fix own image's name and build-date.
Change-Id: I1d13f8f386c8db12b5fbe5f8ecbbf9e3fbb4ba1c
Closes-Bug: #1680341
Use LABEL instruction instead of MAINTAINER (deprecated) instruc-
tion as suggested by Docker's official dockerfile guide.
docs.docker.com/engine/reference/builder/#maintainer-deprecated
Closes-Bug: #1683652
Change-Id: Ie87a1ddf31aefcd0b623fd2837d78de420e76898
Debian support is not maintained in Kolla so it got a bit behind Ubuntu
one. This changeset enables Debian for all images. Jessie (even with
backports) may be too old for some images though.
Also unify distro check to ['debian', 'ubuntu'] to keep alphabetical order
like it is done for RPM distributions.
Partially-Implements: blueprint multiarch-and-arm64-containers
Change-Id: I056233fbfa277e0e2360c07c3f80d9558c554357
Some images have packages sorted alphabetically and some not.
Unify common style between all images.
Change-Id: I906ed89c10b12886665618752f525ba71d83d991
1. Enable customization of pip packages in source
branch of most images
2. All pip packages install uniformly through
install-pip macro, user can easily customize his
own pip command (For example using a mirror)
Co-Authored-By: Mauricio Lima <mauriciolimab@gmail.com>
Change-Id: If09582039f690fa4136e8f33200d5da15e092da7
include_header and include_footer parameter is already removed, remove
them in all Dockerfiles.
Add missing footer block.
Change-Id: I90da03eb9f95a3827361d5f5ede65fde7d6be2b3
This centralizes all user and group creation into a single source. This
will fix any current and furture uid/gid mismatches (such as with
nova-libvirt).
In the process, we also unify users between the distros in a standard
way. The users in the following containers change from thier defaults:
Ubuntu: _chrony user is now chrony
Ubuntu: memcache user is now memcached
All: qemu user is used for ownership and socket permissions
All uid and gid numbers are customizable via kolla-build.conf
Co-Authored-By: Kris Lindgren <klindgren@godaddy.com>
Change-Id: I120f26ab0683dc87d69727c3df8d4707e52a4543
Partially-Implements: blueprint static-uid-gid
Change needed to add header blocks to all Dockerfiles, similar to the
base.
Use case is to easily run something before packages are installed, e.g.
to COPY a local rpm in that can be added to the package list.
Change-Id: I1bbfdf0b762da0a392aa8bf47781315b45377bee
Closes-Bug: 1618969
Is a best practice in Unix/Linux scripts to use dots
instead of source command.
Using dots will avoid issues with non BASH shells
TrivialFix
Change-Id: Ie6480a1954f853f79faffa093452715ebd9f7d90
Signed-off-by: Eduardo Gonzalez <dabarren@gmail.com>
Currently if the install_packages macro is run with an empty
package list, it will add a yum or apt-get command with no
packages listed.
This bug fix aims to omit this line when no packages have
been given, or, the operator wants to use the "_override" /
"_remove" functionality to disable all packages being
installed in a Dockerfile.
Co-Authored-By: Paul Bourke <paul.bourke@oracle.com>
Change-Id: Ifaaaebfccc3adb0f2f68a35ac08e59378bc87fdb
Closes-bug: 1612446
Michal Nasiadka