These services were deprecated during Xena cycle by [1]. Since we have
created the Zed release, now we can remove the features deprecated
before that.
[1] 18651160a9
Change-Id: Ib248ec4bec57a5d747a1cf35157084d2cb51b566
In ancient times, B&R used heat templates to deploy ReaR to the
controllers. Since a long time, this has been superseded by an ansible
playbook ran by openstack overcloud backup --setup-rear. Now, that
feature is duplicated, so we remove the possibility of installing
ReaR with heat.
A deprecation notice has been submitted to stable/train in patch #847148
Related-Bug: rhbz#2097611
Change-Id: Ic01c44ba35b6d28cb45879b1006633ac1fcf8d19
This change adds the CephIngress resource that can be used on top
of CephNfs to deploy the ingress daemon through the orchestrator.
Depends-On: I7e337596b653cf635f07a36606e9f673044402a3
Change-Id: Ibd20627a8b110364e13c2bf26848ba6e3a8e4060
This adds support for BGP via the OS::TripleO::Services::Frr service.
Spec: https://review.opendev.org/c/openstack/tripleo-specs/+/758249
We create the frr configuration via the corresponding tripleo_frr
ansible role at step0. We start the FRR container at deployment step
1 before pacemaker gets configured as the routing to all the other nodes
needs to be functional before setting up the cluster.
Co-Authored-By: Carlos Gonçalves <cgoncalves@redhat.com>
Change-Id: I7cef73c57e7b69f4d031e220c954803afd5e0b8c
This is using linux-system-roles.certificate ansible role,
which replaces puppet-certmonger for submitting certificate
requests to certmonger. Each service is configured through
it's heat template.
Partial-Implements: blueprint ansible-certmonger
Depends-On: https://review.rdoproject.org/r/31713
Change-Id: Ib868465c20d97c62cbcb214bfc62d949bd6efc62
Role names can be customized, yet in THT jinja2 we
have several places where conditions are based on
the role name. By using tag's such as 'storage',
'ceph' and 'ovsdpdk' we the role names become truly
customizable.
The depends-on change in TripleO common will
dynamically add tag's to role's based on role.name
for backward compatibility during deprecation
period.
Depends-On: https://review.opendev.org/758124
Change-Id: I5ab4e4a220294245f95d328391bfffec87781a09
- Remove Docker service from all the roles; not needed anymore
- Switch ContainerCli to podman for docker-ha environment. Note; this
environment might be renamed at some point to, container-ha.yaml. But
for backward compatibility we still use it now.
Also switch EnablePaunch to false since we were waiting for the podman
switch to do it.
- In the overcloud registry, disable Docker by default and enable Podman
by default.
This patch will only work for centos8/rhel8 based deployments.
Change-Id: I561c52ce09c66a7f79763c59cd25f15949c054af
We're dropping this as it has no testing and is not currentily available
for CentOS 8.
Change-Id: I408490346840d5a2e3ae29f53cbc100edcf72ee7
Depends-On: https://review.opendev.org/#/c/712517/
The NovaAZConfig service is added to all the compute related roles
of the box so that the nodes are automatically in a new AZ when the
service is enabled.
By default, the service is mapped to OS::Heat::None so no change in
default behavior is made.
Change-Id: If1e4e149100dccfe76ccd807997a611d0fc8841f
Sensu client has been deprecated and it's functionality substituted
by collectd-sensubility. This patch removes sensu-client composable
service
Change-Id: I4be68eb7319b2c92cc7d0fc9df7a5c87dfb5106c
This patch removes fluentd composable service in favor of rsyslog composable service
and modifies *LoggingSource configuration accordingly.
Change-Id: I1e12470b4eea86d8b7a971875d28a2a5e50d5e07
This patch adds rsyslogd composable service with the same behaviour
the fluentd composable service currently has.
Co-Authored-By: Juan Badia Payno <jbadiapa@redhat.com>
Change-Id: I18e349c450a42dc7e9867d200e777a324e2d12bc
This review introduces the CephDashboard service
to allow operators to deploy the new ceph dashboard
along with the other ceph components.
According to the spec we can add the environment
file to reference the template that contains all the
parameters needed to deploy the ceph-dashboard via
ceph-ansible related roles.
Implements: blueprint ceph-dashboard
Change-Id: I1d31cd99823686986cdbd3ac1df184e9457a361e
This is part 1 of a series of patches to properly deploy multipathd.
This patch makes Multipathd an optional TripleO service (defaults to
OS::Heat::None), and binds it to every role that might use the service.
This is essentially any role that accesses cinder volumes. Previously,
the service was not optional, but was not bound to any roles and so it
was never deployed.
Partial-Bug: #1834042
Change-Id: I3bc7d8557f758103c35533a59e06e36cd15f98b9
By introducing update_serial variable we parallelize update
execution on non-pacemaker enabled nodes. Custom role data users
need to update their role files. By default we do serial 1 making
sure nothing changes for users who didn't update their role data.
Resolves: rhbz#1652057
Closes-Bug: #1831617
Change-Id: I4ee0110a6c2b9466d81e37e5df27f5f81a6eceb5
This addresses a possible bug when using FreeIPA to do TLS
everywhere.
It is possible that the IPA server is not on the ctlplane.
In this case, when the nodes start up, the registration of the node
with IPA will fail, resulting in failed certificate issuance requests
later on.
We introduce a composable service to run in host_prep_tasks.
This will always run once the networks have been set up. If the
instance has already been enrolled (by cloud-init or in an update),
then the script executed by the service will just exit.
In this iteration, we simply execute the code that the cloud-init
would have done. In later releases, we will execute all the code
performed by novajoin-server here in ansible - and deprecate the
novajoin server.
Change-Id: I31f64c3cbd1d151e3c2a436cc3e2ec5316535087
Co-Authored-By: Juan Antonio Osorio Robles <jaosorior@redhat.com>
Resolves: rhbz#1661635
Closes-Bug: #1815924
When using neutron routed networks we need to specify
either the subnet or a ip address in the fixed-ips-request
when creating neutron ports.
a) For the Vip's:
Adds VipSubnetMap and VipSubnetMapDefaults parameters in
service_net_map.yaml. The two maps are merged, so that the
operator can override the subnet where VIP port should be
hosted. For example:
parameter_defaults:
VipSubnetMap:
ctlplane: ctlplane-leaf1
InternalApi: internal_api_leaf1
Storage: storage_leaf1
redis: internal_api_leaf1
b) For overcloud node ports:
Enrich 'networks' in roles defenition to include both
network and subnet data. Changes the list to a map
instead of a list of strings. New schema:
- name: <role_name>
networks:
<network_name>
subnet: <subnet_name>
For backward compatibility a conditional is used to check
if the data is a map or not. In either case the internal
list of role networks is created as '_role_networks' in
the jinja2 templates.
When the data is a map, and the map contains the 'subnet'
key the subnet specified in roles_data.yaml is used as
the subnet in the fixed-ips-reqest when ports are created.
If subnet is not set (or role.networks is not a map) the
default will be {{network.name_lower}}_subnet.
Also, since the fixed_ips request passed to Vip ports are no
longer [] by default, the conditinal has been updated to
test for 'ip_address' entries in the request.
Partial: blueprint tripleo-routed-networks-templates
Depends-On: I773a38fd903fe287132151a4d178326a46890969
Change-Id: I77edc82723d00bfece6752b5dd2c79137db93443
NIC partitioning requires IOMMU to be enabled on roles using it.
By adding the BootParams service to all the roles, we could
enable IOMMU selectively by supplying the role specific parameter
"KernelArgs". If a role doesn't use NIC Partitioning then
"KernelArgs" shall be not be set and backward compatibility would
be retained.
Change-Id: I2eb078d9860d9a46d6bffd0fe2f799298538bf73
Podman service will be in charge of installing, configuring, upgrading
and updating podman in TripleO.
For now, the service is disabled by default but included in all roles.
In the cycle, we'll make it the default.
Note: when Podman will be able to run in TripleO without Docker,
we'll do like https://review.openstack.org/#/c/586679/ and make it as
a generic service that can be switched to either podman or docker.
But for now, we need podman & docker working side by side.
Depends-On: Ie9f5d3b6380caa6824ca940ca48ed0fcf6308608
Change-Id: If9e311df2fc7b808982ee54224cc0ea27e21c830
In order to support switching between multiple timesync backends, let's
simplify the service configurations for the roles so that there is a
single timesync service. This timesync service should point to the
expected backend (ntp/ptp/chrony).
Change-Id: I986d39398b6143f6c11be29200a4ce364575e402
Related-Blueprint: tripleo-chrony
This patch adds composable new service (QDR) for containerized deployments.
Metrics QDR will run on each overcloud node in 'edge' mode. This basically
means that there is a possibility that there will be two QDRs running
on controllers in case that oslo messaging is deployed. This is a reason why
we need separate composable service for this use case.
Depends-On: If9e3658d304c3071f53ecb1c42796d2603875fcd
Depends-On: I68f39b6bda02ba3920f2ab1cf2df0bd54ad7453f
Depends-On: I73f988d05840eca44949f13f248f86d094a57c46
Change-Id: I1353020f874b348afd98e7ed3832033f85a5267f
NovaResumeGuestsStateOnHostBoot (true/false) parameter which
configures whether or not to start again instances which were running at
the time of a compute reboot.
This will set the resume_guests_state_on_host_boot parameter in nova.conf
and configures and enables libvirt-guests with a dependency to the
docker service to shutdown instances before the libvirt container gets
stopped.
NovaResumeGuestsShutdownTimeout specifies the number in seconds for an
instance to allow to shutdown.
Change-Id: I946600ebbc3afd88385ca89015e8f6a6c46f46ef
Closes-Bug: 1778216
Depends-On: I2766cdd66ff17756daaf1a75ad516a7af6eebddc
Depends-On: Id1cc2e75af316b864cebf601395f1111b7fb049a
Computes should have virtual-host tuned profile set per default in
roles definition. HCI compute as recommended before keep
throughput-performance.
Fixes bug 1667524
Change-Id: I26426e1dd0a2e81ad7549c11fb984ef5470d0561
In I75f087dc456c50327c3b4ad98a1f89a7e012dc68 we removed much of
the legacy upgrade workflow. This now also removes the
disable_upgrade_deployment flag and the tripleo_upgrade_node.sh
script, both of which are no longer used and have no effect on
the upgrade.
Related reviews
I7b19c5299d6d60a96a73cafaf0d7103c3bd7939d tripleo-common
I4227f82168271089ae32cbb1f318d4a84e278cc7 python-tripleoclient
Change-Id: Ib340376ee80ea42a732a51d0c195b048ca0440ac
Precision Time Protocol (PTP) is a protocol used to
synchronize clocks throughout a network. When used
in conjunction with hardware support, PTP is capable
of sub-microsecond accuracy which is far better than
is normally obtainable with NTP.
Change-Id: I98a1833db28944cfd5a89e4f28c192bb9af8ebbb
Depends-On: Idc78df3a90b73be504480bc9d33a3f0041d2d84f
Introduces a service to configure AIDE Intrusion Detection.
This service init's the database and copies the new database
to the active naming. It also sets a cron job, using email if
`AideEmail` is populated, otherwise the reports are sent to
`/var/log/aide/`.
AIDE rules can be supplied as a hash, and should the rules ever
be changed, the service will populate the new rules and re-init
a fresh integrity database.
Related-Blueprint: tripleo-aide-database
Depends-On: Iac2ceb7fc6b610f8920ae6f75faa2885f3edf6eb
Change-Id: I23d8ba2c43e907372fe079026df1fca5fa1c9881
This patch adds support for networking-ovn-metadata-agent.
It will deploy the agent on compute nodes and disable Nova
force_config_drive.
The following two patches have been squashed into this one:
* https://review.openstack.org/#/c/525164/
* https://review.openstack.org/#/c/522813/
The reason behind the squash is that we had interdepenencies
and this patch alone wouldn't be testing the code properly
without the two other ones since scenario007 job in baremetal
has been removed for this cycle.
UpgradeImpact
Depends-On: I678652294cb8f964c34b742a0bc0ea360d736fb9
Depends-On: If3dffde5e0db8f7607a9708d36d54d1600fe5da8
Depends-On: I38f775479d178f5b252619635b67f876bc8c5ed5
Depends-On: Ifdd42437333730a3b3e6f36cbab6df0a2971a5a1
Depends-On: I940cec6d670df39ac6e2a3559a028acbeee99331
Change-Id: Idc2bb4e31a64502ac6fcdac771d823509dc328e7
Signed-off-by: Daniel Alvarez <dalvarez@redhat.com>
Idce7aa04753eadb459124d6095efd1fe2cc95c17 introduced some extra
whitespace. This is a follow up patch to clean it.
Change-Id: I71e3387ad234444737d4430753f9bf9aaa2054c2
Background:
extraconfig/pre_deploy/rhel-registration interface has been maintained
for some time now but it's missing some features and the code overlaps
with ongoing efforts to convert everything to Ansible.
Plan:
Consume ansible-role-redhat-subscription from TripleO, so all the logics
goes into the Ansible role, and not in TripleO anymore.
The single parameter exposed to TripleO is RhsmVars and any Ansible
parameter can be given to make the role working.
The parameter can be overriden per roles, so we can think at specific
cases were some Director roles would have specific RHSM configs.
Once we have feature parity between what is done and what was here
before, we'll deprecate the old interface.
Testing:
Because RHSM can't be tested on CentOS, this code was manually tested on
RHEL against the public subscription portal. Also, we verified that
generated Ansible playbooks were correct and called the role with the
right parameters.
Documentation:
We'll work on documentation during the following weeks and explain
how to switch from the previous interface to the new one, and also
document new uses requested by our users.
Change-Id: I8610e4f1f8478f2dcbe3afc319981df914ce1780
With the move to containers, Ceph OSDs may be combined with other
Ceph services and dedicated Ceph monitors on controllers will be
used less. Popular Ceph roles which include OSDs are Ceph file,
object and nodes which can run all Ceph services. This pattern
will also apply to HCI roles. This change adds the following
pre-composed roles to make it easier for users to use these
patterns:
- CephAll: Standalone Storage Full Role (OSD + MON + RGW + MDS + MGR + RBD Mirroring)
- CephFile: Standalone Scale-out File Role (OSD + MDS)
- CephObject: Standalone Scale-out Object Role (OSD + RGW)
- HciCephAll: HCI Full Stack Role (OSD + MON + Nova + RGW + MDS + MGR + RBD Mirroring)
- HciCephFile: HCI Scale-out File Role (OSD + Nova + MDS)
- HciCephObject: HCI Scale-out Object Role (OSD + Nova + RGW)
- HciCephMon: HCI Scale-out Block Full Role (OSD + MON + MGR + Nova)
- ControllerNoCeph: OpenStack Controller without any Ceph Services
Change-Id: Idce7aa04753eadb459124d6095efd1fe2cc95c17
Ghanshyam Mann