charm-ceph-osd/config.yaml

options:
  loglevel:
    default: 1
    type: int
    description: OSD debug level. Max is 20.
  config-flags:
    type: string
    default:
    description: |
        User provided Ceph configuration. Supports a string representation of
        a python dictionary where each top-level key represents a section in
        the ceph.conf template. You may only use sections supported in the
        template.
        .
        WARNING: this is not the recommended way to configure the underlying
        services that this charm installs and is used at the user's own risk.
        This option is mainly provided as a stop-gap for users that either
        want to test the effect of modifying some config or who have found
        a critical bug in the way the charm has configured their services
        and need it fixed immediately. We ask that whenever this is used,
        that the user consider opening a bug on this charm at
        http://bugs.launchpad.net/charms providing an explanation of why the
        config was needed so that we may consider it for inclusion as a
        natively supported config in the the charm.        
  osd-devices:
    type: string
    default: /dev/vdb
    description: |
      The devices to format and set up as osd volumes.

      These devices are the range of devices that will be checked for and
      used across all service units, in addition to any volumes attached
      via the --storage flag during deployment.

      For ceph >= 0.56.6 these can also be directories instead of devices - the
      charm assumes anything not starting with /dev is a directory instead.      
  osd-journal:
    type: string
    default:
    description: |
      The device to use as a shared journal drive for all OSD's.  By default
      no journal device will be used.

      Only supported with ceph >= 0.48.3.      
  osd-journal-size:
    type: int
    default: 1024
    description: |
      Ceph osd journal size. The journal size should be at least twice the
      product of the expected drive speed multiplied by filestore max sync
      interval. However, the most common practice is to partition the journal
      drive (often an SSD), and mount it such that Ceph uses the entire
      partition for the journal.

      Only supported with ceph >= 0.48.3.      
  osd-format:
    type: string
    default: xfs
    description: |
      Format of filesystem to use for OSD devices; supported formats include:

        xfs (Default >= 0.48.3)
        ext4 (Only option < 0.48.3)
        btrfs (experimental and not recommended)

      Only supported with ceph >= 0.48.3.      
  bluestore:
    type: boolean
    default: false
    description: |
      Use experimental bluestore storage format for OSD devices; only supported
      in Ceph Jewel (10.2.0) or later.      
  osd-reformat:
    type: string
    default:
    description: |
      By default, the charm will not re-format a device that already looks
      as if it might be an OSD device.  This is a safeguard to try to
      prevent data loss.

      Specifying this option (any value) forces a reformat of any OSD devices
      found which are not already mounted.      
  osd-encrypt:
    type: boolean
    default: False
    description: |
      By default, the charm will not encrypt Ceph OSD devices; however, by
      setting osd-encrypt to True, Ceph's dmcrypt support will be used to
      encrypt OSD devices.

      Specifying this option on a running Ceph OSD node will have no effect
      until new disks are added, at which point new disks will be encrypted.      
  ignore-device-errors:
    type: boolean
    default: False
    description: |
      By default, the charm will raise errors if a whitelisted device is found,
      but for some reason the charm is unable to initialize the device for use
      by Ceph.

      Setting this option to 'True' will result in the charm classifying such
      problems as warnings only and will not result in a hook error.      
  ephemeral-unmount:
    type: string
    default:
    description: |
      Cloud instances provide ephermeral storage which is normally mounted
      on /mnt.

      Setting this option to the path of the ephemeral mountpoint will force
      an unmount of the corresponding device so that it can be used as a OSD
      storage device.  This is useful for testing purposes (cloud deployment
      is not a typical use case).      
  source:
    type: string
    default:
    description: |
      Optional configuration to support use of additional sources such as:

        - ppa:myteam/ppa
        - cloud:trusty-proposed/kilo
        - http://my.archive.com/ubuntu main

      The last option should be used in conjunction with the key configuration
      option.

      Note that a minimum ceph version of 0.48.2 is required for use with this
      charm which is NOT provided by the packages in the main Ubuntu archive
      for precise but is provided in the Ubuntu cloud archive.      
  key:
    type: string
    default:
    description: |
      Key ID to import to the apt keyring to support use with arbitary source
      configuration from outside of Launchpad archives or PPA's.      
  use-syslog:
    type: boolean
    default: False
    description: |
      If set to True, supporting services will log to syslog.      
  ceph-public-network:
    type: string
    default:
    description: |
      The IP address and netmask of the public (front-side) network (e.g.,
      192.168.0.0/24)
      .
      If multiple networks are to be used, a space-delimited list of a.b.c.d/x
      can be provided.      
  ceph-cluster-network:
    type: string
    default:
    description: |
      The IP address and netmask of the cluster (back-side) network (e.g.,
      192.168.0.0/24)
      .
      If multiple networks are to be used, a space-delimited list of a.b.c.d/x
      can be provided.      
  prefer-ipv6:
    type: boolean
    default: False
    description: |
      If True enables IPv6 support. The charm will expect network interfaces
      to be configured with an IPv6 address. If set to False (default) IPv4
      is expected.
      .
      NOTE: these charms do not currently support IPv6 privacy extension. In
      order for this charm to function correctly, the privacy extension must be
      disabled and a non-temporary address must be configured/available on
      your network interface.      
  sysctl:
    type: string
    default: '{ kernel.pid_max : 2097152, vm.max_map_count : 524288,
                kernel.threads-max: 2097152, vm.vfs_cache_pressure: 1,
                vm.swappiness: 1 }'
    description: |
      YAML-formatted associative array of sysctl key/value pairs to be set
      persistently. By default we set pid_max, max_map_count and
      threads-max to a high value to avoid problems with large numbers (>20)
      of OSDs recovering. very large clusters should set those values even
      higher (e.g. max for kernel.pid_max is 4194303).      
  customize-failure-domain:
    type: boolean
    default: false
    description: |
      Setting this to true will tell Ceph to replicate across Juju's
      Availability Zone instead of specifically by host.      
  availability_zone:
    type: string
    default: 
    description: |
      Custom availablility zone to provide to Ceph for the OSD placement      
  max-sectors-kb:
    default: 1048576
    type: int
    description: |
      This parameter will adjust every block device in your server to allow
      greater IO operation sizes.  If you have a RAID card with cache on it
      consider tuning this much higher than the 1MB default.  1MB is a safe
      default for spinning HDDs that don't have much cache.      
  nagios_context:
    type: string
    default: "juju"
    type: string
    description: |
      Used by the nrpe-external-master subordinate charm.
      A string that will be prepended to instance name to set the host name
      in nagios. So for instance the hostname would be something like:
          juju-myservice-0
      If you're running multiple environments with the same services in them
      this allows you to differentiate between them.      
  nagios_servicegroups:
    default: ""
    type: string
    description: |
      A comma-separated list of nagios servicegroups.
      If left empty, the nagios_context will be used as the servicegroup      
  use-direct-io:
    default: True
    type: boolean
    description: Configure use of direct IO for OSD journals.
  harden:
    default:
    type: string
    description: |
      Apply system hardening. Supports a space-delimited list of modules
      to run. Supported modules currently include os, ssh, apache and mysql.      
  autotune:
    default: False
    type: boolean
    description: |
      Enabling this option will attempt to tune your network card sysctls and
      hard drive settings. This changes hard drive read ahead settings and
      max_sectors_kb.  For the network card this will detect the link speed
      and make appropriate sysctl changes. Enabling this option should
      generally be safe.      
  aa-profile-mode:
    type: string
    default: 'disable'
    description: |
      Enable apparmor profile. Valid settings: 'complain', 'enforce' or 'disable'.
      .
      NOTE: changing the value of this option is disruptive to a running Ceph
      cluster as all ceph-osd processes must be restarted as part of changing the
      apparmor profile enforcement mode.