options: debug: type: boolean default: False description: Enable debug logging. verbose: type: boolean default: False description: Enable verbose logging. use-syslog: type: boolean default: False description: | Setting this to True will allow supporting services to log to syslog. openstack-origin: type: string default: distro description: | Repository from which to install. May be one of the following: distro (default), ppa:somecustom/ppa, a deb url sources entry, or a supported Ubuntu Cloud Archive e.g. . cloud:- cloud:-/updates cloud:-/staging cloud:-/proposed . See https://wiki.ubuntu.com/OpenStack/CloudArchive for info on which cloud archives are available and supported. . NOTE: updating this setting to a source that is known to provide a later version of OpenStack will trigger a software upgrade unless action-managed-upgrade is set to True. openstack-origin-git: type: string default: description: | Specifies a default OpenStack release name, or a YAML dictionary listing the git repositories to install from. . The default Openstack release name may be one of the following, where the corresponding OpenStack github branch will be used: * liberty * mitaka * newton * master . The YAML must minimally include the following repositories, and may also include repositories for other dependencies: repositories: - {name: requirements, repository: 'git://github.com/openstack/requirements', branch: master} - {name: networking-hyperv, repository: 'git://github.com/openstack/networking-hyperv', branch: master} - {name: neutron-fwaas, repository: 'git://github.com/openstack/neutron-fwaas', branch: master} - {name: neutron-lbaas, repository: 'git://github.com/openstack/neutron-lbaas', branch: master} - {name: neutron-vpnaas, repository: 'git://github.com/openstack/neutron-vpnaas', branch: master} - {name: neutron, repository: 'git://github.com/openstack/neutron', branch: master} release: master extra-key: type: string default: description: Optional key for archive containing additional packages. extra-source: type: string default: description: Optional source for archive containing additional packages. action-managed-upgrade: type: boolean default: False description: | If True enables openstack upgrades for this charm via juju actions. You will still need to set openstack-origin to the new repository but instead of an upgrade running automatically across all units, it will wait for you to execute the openstack-upgrade action for this charm on each unit. If False it will revert to existing behavior of upgrading all units on config change. harden: default: type: string description: | Apply system hardening. Supports a space-delimited list of modules to run. Supported modules currently include os, ssh, apache and mysql. rabbit-user: type: string default: neutron description: Username used to access rabbitmq queue. rabbit-vhost: type: string default: openstack description: Rabbitmq vhost name. database-user: type: string default: neutron description: Username for Neutron database access (if enabled). database: type: string default: neutron description: Database name for Neutron (if enabled). region: type: string default: RegionOne description: OpenStack region name. use-internal-endpoints: type: boolean default: False description: | Openstack mostly defaults to using public endpoints for internal communication between services. If set to True this option will configure services to use internal endpoints where possible. neutron-security-groups: type: boolean default: False description: Use Neutron for security group management. neutron-external-network: type: string default: ext_net description: | Name of the external network for floating IP addresses provided by Neutron. network-device-mtu: type: int default: description: | The MTU size for interfaces managed by neutron. If unset or set to 0, no value will be applied. This value will be provided to neutron-plugin-api relations. . NOTE: This option is deprecated and will be removed in Newton. Please use the system-wide global-physnet-mtu setting which the agents will take into account when wiring VIFs. neutron-plugin: type: string default: ovs description: | Neutron plugin to use for network management; supports . ovs - OpenvSwitch Plugin vsp - Nuage Networks VSP nsx - VMWare NSX Calico - Project Calico Networking midonet - MidoNet plumgrid - PLUMgrid . overlay-network-type: type: string default: gre description: | Overlay network types to use, valid options include: . gre vxlan . Multiple types can be provided - field is space delimited. To disable overlay networks set to the empty string '' flat-network-providers: type: string default: description: | Space-delimited list of Neutron flat network providers. vlan-ranges: type: string default: "physnet1:1000:2000" description: | Space-delimited list of :: or specifying physical_network names usable for VLAN provider and tenant networks, as well as ranges of VLAN tags on each available for allocation to tenant networks. vni-ranges: type: string default: "1001:2000" description: | Space-delimited list of : for VXLAN provider. enable-ml2-port-security: type: boolean default: False description: Enable port security extension for ML2 plugin (>= kilo). enable-ml2-dns: type: boolean default: False description: | Enables the Neutron DNS extension driver (>= mitaka). When enabled, ports attached to Nova instances will have DNS names assigned based on the instance name. haproxy-server-timeout: type: int default: description: | Server timeout configuration in ms for haproxy, used in HA configurations. If not provided, default value of 30000ms is used. haproxy-client-timeout: type: int default: description: | Client timeout configuration in ms for haproxy, used in HA configurations. If not provided, default value of 30000ms is used. haproxy-queue-timeout: type: int default: description: | Queue timeout configuration in ms for haproxy, used in HA configurations. If not provided, default value of 5000ms is used. haproxy-connect-timeout: type: int default: description: | Connect timeout configuration in ms for haproxy, used in HA configurations. If not provided, default value of 5000ms is used. enable-sriov: type: boolean default: False description: | Enable SR-IOV networking support across Neutron and Nova. supported-pci-vendor-devs: type: string default: description: | NOTE: Required for OpenStack versions Kilo, Liberty and Mitaka. Ignored for OpenStack Newton and newer. . Space-delimited list of supported Vendor PCI Devices, in format vendor_id:product_id . Example: 15b3:1004 8086:10ca . This must be set to match available hardware on nova-compute units. Neutron will refuse to bind ports to hardware with Vendor PCI IDs not in this list. (Use lspci -nn to get IDs) . NOTE: The vendor_id:product_id of the PFs and VFs differ. Make sure to enter the correct one for your use case. midonet-origin: type: string default: midonet-2015.06 description: | 'mem-1.8', 'mem-1.9', 'midonet-2015.06' . NOTE: updating this setting to a source that is known to provide a later version of MidoNet (do not change between MEM and MidoNet) will trigger a software upgrade. mem-username: type: string default: description: | The Midokura Enterprise MidoNet username credentials to access the repository. mem-password: type: string default: description: | The Midokura Enterprise MidoNet password credentials to access the repository. config-flags: type: string default: description: | Comma-separated list of key=value config flags. These values will be placed in the neutron.conf [DEFAULT] section. . WARNING: this is not the recommended way to configure the underlying services that this charm installs and is used at the user's own risk. This option is mainly provided as a stop-gap for users that either want to test the effect of modifying some config or who have found a critical bug in the way the charm has configured their services and need it fixed immediately. We ask that whenever this is used, that the user consider opening a bug on this charm at http://bugs.launchpad.net/charm-neutron-api providing an explanation of why the config was needed so that we may consider it for inclusion as a natively supported config in the the charm. default-tenant-network-type: type: string default: description: | The default type for a tenant network e.g. vxlan, vlan, gre etc global-physnet-mtu: type: int default: 1500 description: | MTU of the underlying physical network. Neutron uses this value to calculate MTU for all virtual network components. For flat and VLAN networks, neutron uses this value without modification. For overlay networks such as VXLAN, neutron automatically subtracts the overlay protocol overhead from this value. . NOTE: This options is available starting from Mitaka release. path-mtu: type: int default: description: | Maximum size of an IP packet (MTU) that can traverse the underlying physical network infrastructure without fragmentation when using an overlay/tunnel protocol. This option allows specifying a physical network MTU value that differs from the default global-physnet-mtu value. dns-domain: type: string default: openstack.example. description: | Specifies the dns domain name that should be used for building instance hostnames. An empty option or the value of 'openstacklocal' will cause the dhcp agents to broadcast the default domain of openstacklocal and will not enable internal cloud dns resolution. This value should end with a '.', e.g. 'cloud.example.org.'. l2-population: type: boolean default: True description: | Populate the forwarding tables of virtual switches (LinuxBridge or OVS), to decrease broadcast traffics inside the physical networks fabric while using overlays networks (VXLan, GRE). manage-neutron-plugin-legacy-mode: type: boolean default: True description: | If True neutron-server will install neutron packages for the plugin configured. enable-dvr: type: boolean default: False description: | Enable Distributed Virtual Routing (juno and above). enable-l3ha: type: boolean default: False description: | Enable L3 HA (juno and above). max-l3-agents-per-router: type: int default: 2 description: | Maximum number of l3 agents to host a router. Only used when enable-l3ha is True. min-l3-agents-per-router: default: 2 type: int description: | Minimum number of l3 agents to host a router. Only used when enable-l3ha is True. dhcp-agents-per-network: type: int default: 1 description: | The number of dhcp agents to be deployed per network. Note that if the Calico plugin is being used, this option has no effect. worker-multiplier: type: float default: description: | The CPU core multiplier to use when configuring worker processes for this service. By default, the number of workers for each daemon is set to twice the number of CPU cores a service unit has. When deployed in a LXD container, this default value will be capped to 4 workers unless this configuration option is set. polling-interval: type: int default: 2 description: | The number of seconds the agent will wait between polling for local device changes. Used by neutron l2 agents. rpc-response-timeout: type: int default: 60 description: | Seconds to wait for a response from a call. Used by all neutron agents (includes l2 agents and other types of agents). report-interval: type: int default: 30 description: | Seconds between nodes reporting state to server; should be less than agent_down_time, best if it is half or less than agent_down_time. Used by all neutron agents (includes l2 agents and other types of agents). enable-qos: type: boolean default: False description: | Enable QoS (assuming the plug-in or ml2 mechanism driver can support it) # Quota config quota-security-group: type: int default: 10 description: | Number of security groups allowed per tenant. A negative value means unlimited. quota-security-group-rule: type: int default: 100 description: | Number of security group rules allowed per tenant. A negative value means unlimited quota-network: type: int default: 10 description: | Number of networks allowed per tenant. A negative value means unlimited. quota-subnet: type: int default: 10 description: | Number of subnets allowed per tenant. A negative value means unlimited. quota-port: type: int default: 50 description: | Number of ports allowed per tenant. A negative value means unlimited. quota-vip: type: int default: 10 description: | Number of vips allowed per tenant. A negative value means unlimited. quota-pool: type: int default: 10 description: | Number of pools allowed per tenant. A negative value means unlimited. quota-member: type: int default: -1 description: | Number of pool members allowed per tenant. A negative value means unlimited. The default is unlimited because a member is not a real resource consumer on Openstack. However, on back-end, a member is a resource consumer and that is the reason why quota is possible. quota-health-monitors: type: int default: -1 description: | Number of health monitors allowed per tenant. A negative value means unlimited. The default is unlimited because a health monitor is not a real resource consumer on Openstack. However, on back-end, a member is a resource consumer and that is the reason why quota is possible. quota-router: default: 10 type: int description: | Number of routers allowed per tenant. A negative value means unlimited. quota-floatingip: type: int default: 50 description: | Number of floating IPs allowed per tenant. A negative value means unlimited. # HA config dns-ha: type: boolean default: False description: | Use DNS HA with MAAS 2.0. Note if this is set do not set vip* settings. vip: type: string default: description: | Virtual IP(s) to use to front API services in HA configuration. . If multiple networks are being used, a VIP should be provided for each network, separated by spaces. vip_iface: type: string default: eth0 description: | Default network interface to use for HA vip when it cannot be automatically determined. vip_cidr: type: int default: 24 description: | Default CIDR netmask to use for HA vip when it cannot be automatically determined. ha-bindiface: type: string default: eth0 description: | Default network interface on which HA cluster will bind to communication with the other members of the HA Cluster. ha-mcastport: type: int default: 5424 description: | Default multicast port number that will be used to communicate between HA Cluster nodes. # Network config (by default all access is over 'private-address') os-admin-network: type: string default: description: | The IP address and netmask of the OpenStack Admin network (e.g. 192.168.0.0/24) . This network will be used for admin endpoints. os-internal-network: type: string default: description: | The IP address and netmask of the OpenStack Internal network (e.g. 192.168.0.0/24) . This network will be used for internal endpoints. os-public-network: type: string default: description: | The IP address and netmask of the OpenStack Public network (e.g. 192.168.0.0/24) . This network will be used for public endpoints. os-public-hostname: type: string default: description: | The hostname or address of the public endpoints created for neutron-api in the keystone identity provider. . This value will be used for public endpoints. For example, an os-public-hostname set to 'neutron-api.example.com' with ssl enabled will create the following endpoint for neutron-api: . https://neutron-api.example.com:9696/ os-internal-hostname: type: string default: description: | The hostname or address of the internal endpoints created for neutron-api in the keystone identity provider. . This value will be used for internal endpoints. For example, an os-internal-hostname set to 'neutron-api.internal.example.com' with ssl enabled will create a internal endpoint for neutron-api: . https://neutron-api.internal.example.com:9696/ os-admin-hostname: type: string default: description: | The hostname or address of the admin endpoints created for neutron-api in the keystone identity provider. . This value will be used for admin endpoints. For example, an os-admin-hostname set to 'neutron-api.admin.example.com' with ssl enabled will create a internal endpoint for neutron-api: . https://neutron-api.admin.example.com:9696/ ssl_cert: type: string default: description: | SSL certificate to install and use for API ports. Setting this value and ssl_key will enable reverse proxying, point Neutron's entry in the Keystone catalog to use https, and override any certificate and key issued by Keystone (if it is configured to do so). ssl_key: type: string default: description: SSL key to use with certificate specified as ssl_cert. ssl_ca: type: string default: description: | SSL CA to use with the certificate and key provided - this is only required if you are providing a privately signed ssl_cert and ssl_key. prefer-ipv6: type: boolean default: False description: | If True enables IPv6 support. The charm will expect network interfaces to be configured with an IPv6 address. If set to False (default) IPv4 is expected. . NOTE: these charms do not currently support IPv6 privacy extension. In order for this charm to function correctly, the privacy extension must be disabled and a non-temporary address must be configured/available on your network interface. # Monitoring config nagios_context: type: string default: "juju" description: | Used by the nrpe-external-master subordinate charm. A string that will be prepended to instance name to set the host name in nagios. So for instance the hostname would be something like 'juju-myservice-0'. If you are running multiple environments with the same services in them this allows you to differentiate between them. nagios_servicegroups: type: string default: "" description: | A comma-separated list of nagios servicegroups. If left empty, the nagios_context will be used as the servicegroup # Nuage plugin (VSD) config nuage-packages: type: string default: "nuage-openstack-neutron nuagenetlib" description: | Its [nuage-openstack-neutron nuagenetlib] for Nuage VSP >=3.2R4 & KILO and [nuage-neutron python-nuagenetlib] of Nuage VSP <=3.0 & JUNO vsd-cms-id: type: string default: description: | CMS ID is used as an authentication token from VSD to CMS. This value is being generated via nuage scripts and can be set pre/post deployment. vsd-cms-name: type: string default: description: | This is required only for 3.2 R4 and above releases of Nuage and Kilo. Please give Maas env id so that it is unique per openstack cluster. This name is used to create th CMS ID on Nuage-VSD which should be unique per OSP cluster. Your Deployment will fail if this config is not provided. vsd-server: type: string default: description: Nuage VSD Server vsd-auth: type: string default: "csproot:csproot" description: Username Password to connect to Nuage VSD Server vsd-organization: type: string default: csp description: Name of the organization in Nuage VSD vsd-auth-ssl: type: boolean default: True description: SSL authentication of the Nuage VSD Server vsd-base-uri: type: string default: "/nuage/api/v3_0" description: Nuage VSD API endpoint URI vsd-auth-resource: type: string default: "/me" description: Nuage VSD authentication resource vsd-netpart-name: type: string default: juju-enterprise description: Name of the Organization or Enterprise to create in Nuage VSD # VMware NSX plugin config nsx-controllers: type: string default: description: Space delimited addresses of NSX controllers nsx-username: type: string default: admin description: Username to connect to NSX controllers with nsx-password: type: string default: admin description: Password to connect to NSX controllers with nsx-tz-uuid: type: string default: description: | This is uuid of the default NSX Transport zone that will be used for creating tunneled isolated Neutron networks. It needs to be created in NSX before starting Neutron with the nsx plugin. nsx-l3-uuid: type: string default: description: This is uuid of the default NSX L3 Gateway Service. # PLUMgrid Plugin config plumgrid-username: type: string default: plumgrid description: Username to access PLUMgrid Director plumgrid-password: type: string default: plumgrid description: Password to access PLUMgrid Director plumgrid-virtual-ip: type: string default: description: IP address of PLUMgrid Director # Calico plugin config calico-origin: type: string default: description: | Repository from which to install Calico packages. If set, must be a PPA URL, of the form ppa:somecustom/ppa. Changing this value after installation will force an immediate software upgrade.