#!/bin/bash # # lib/neutron # functions - functions specific to neutron # Dependencies: # ``functions`` file # ``DEST`` must be defined # ``STACK_USER`` must be defined # ``stack.sh`` calls the entry points in this order: # # - install_neutron_agent_packages # - install_neutronclient # - install_neutron # - install_neutron_third_party # - configure_neutron # - init_neutron # - configure_neutron_third_party # - init_neutron_third_party # - start_neutron_third_party # - create_nova_conf_neutron # - start_neutron_service_and_check # - check_neutron_third_party_integration # - start_neutron_agents # - create_neutron_initial_network # # ``unstack.sh`` calls the entry points in this order: # # - stop_neutron # - stop_neutron_third_party # - cleanup_neutron # Functions in lib/neutron are classified into the following categories: # # - entry points (called from stack.sh or unstack.sh) # - internal functions # - neutron exercises # - 3rd party programs # Neutron Networking # ------------------ # Make sure that neutron is enabled in ``ENABLED_SERVICES``. If you want # to run Neutron on this host, make sure that q-svc is also in # ``ENABLED_SERVICES``. # # See "Neutron Network Configuration" below for additional variables # that must be set in localrc for connectivity across hosts with # Neutron. # # With Neutron networking the NETWORK_MANAGER variable is ignored. # Settings # -------- # Neutron Network Configuration # ----------------------------- deprecated "Using lib/neutron-legacy is deprecated, and it will be removed in the future" if is_ssl_enabled_service "neutron" || is_service_enabled tls-proxy; then Q_PROTOCOL="https" fi # Set up default directories GITDIR["python-neutronclient"]=$DEST/python-neutronclient NEUTRON_DIR=$DEST/neutron NEUTRON_FWAAS_DIR=$DEST/neutron-fwaas NEUTRON_AUTH_CACHE_DIR=${NEUTRON_AUTH_CACHE_DIR:-/var/cache/neutron} # Support entry points installation of console scripts if [[ -d $NEUTRON_DIR/bin/neutron-server ]]; then NEUTRON_BIN_DIR=$NEUTRON_DIR/bin else NEUTRON_BIN_DIR=$(get_python_exec_prefix) fi NEUTRON_CONF_DIR=/etc/neutron NEUTRON_CONF=$NEUTRON_CONF_DIR/neutron.conf export NEUTRON_TEST_CONFIG_FILE=${NEUTRON_TEST_CONFIG_FILE:-"$NEUTRON_CONF_DIR/debug.ini"} # Agent binaries. Note, binary paths for other agents are set in per-service # scripts in lib/neutron_plugins/services/ AGENT_DHCP_BINARY="$NEUTRON_BIN_DIR/neutron-dhcp-agent" AGENT_L3_BINARY=${AGENT_L3_BINARY:-"$NEUTRON_BIN_DIR/neutron-l3-agent"} AGENT_META_BINARY="$NEUTRON_BIN_DIR/neutron-metadata-agent" # Agent config files. Note, plugin-specific Q_PLUGIN_CONF_FILE is set and # loaded from per-plugin scripts in lib/neutron_plugins/ Q_DHCP_CONF_FILE=$NEUTRON_CONF_DIR/dhcp_agent.ini Q_L3_CONF_FILE=$NEUTRON_CONF_DIR/l3_agent.ini Q_META_CONF_FILE=$NEUTRON_CONF_DIR/metadata_agent.ini # Default name for Neutron database Q_DB_NAME=${Q_DB_NAME:-neutron} # Default Neutron Plugin Q_PLUGIN=${Q_PLUGIN:-ml2} # Default Neutron Port Q_PORT=${Q_PORT:-9696} # Default Neutron Internal Port when using TLS proxy Q_PORT_INT=${Q_PORT_INT:-19696} # Default Neutron Host Q_HOST=${Q_HOST:-$SERVICE_HOST} # Default protocol Q_PROTOCOL=${Q_PROTOCOL:-$SERVICE_PROTOCOL} # Default listen address Q_LISTEN_ADDRESS=${Q_LISTEN_ADDRESS:-$SERVICE_LISTEN_ADDRESS} # Default admin username Q_ADMIN_USERNAME=${Q_ADMIN_USERNAME:-neutron} # Default auth strategy Q_AUTH_STRATEGY=${Q_AUTH_STRATEGY:-keystone} # RHEL's support for namespaces requires using veths with ovs Q_OVS_USE_VETH=${Q_OVS_USE_VETH:-False} Q_USE_ROOTWRAP=${Q_USE_ROOTWRAP:-True} Q_USE_ROOTWRAP_DAEMON=$(trueorfalse True Q_USE_ROOTWRAP_DAEMON) # Meta data IP Q_META_DATA_IP=${Q_META_DATA_IP:-$SERVICE_HOST} # Allow Overlapping IP among subnets Q_ALLOW_OVERLAPPING_IP=${Q_ALLOW_OVERLAPPING_IP:-True} Q_NOTIFY_NOVA_PORT_STATUS_CHANGES=${Q_NOTIFY_NOVA_PORT_STATUS_CHANGES:-True} Q_NOTIFY_NOVA_PORT_DATA_CHANGES=${Q_NOTIFY_NOVA_PORT_DATA_CHANGES:-True} VIF_PLUGGING_IS_FATAL=${VIF_PLUGGING_IS_FATAL:-True} VIF_PLUGGING_TIMEOUT=${VIF_PLUGGING_TIMEOUT:-300} # List of config file names in addition to the main plugin config file # See _configure_neutron_common() for details about setting it up declare -a Q_PLUGIN_EXTRA_CONF_FILES Q_RR_CONF_FILE=$NEUTRON_CONF_DIR/rootwrap.conf if [[ "$Q_USE_ROOTWRAP" == "False" ]]; then Q_RR_COMMAND="sudo" else NEUTRON_ROOTWRAP=$(get_rootwrap_location neutron) Q_RR_COMMAND="sudo $NEUTRON_ROOTWRAP $Q_RR_CONF_FILE" if [[ "$Q_USE_ROOTWRAP_DAEMON" == "True" ]]; then Q_RR_DAEMON_COMMAND="sudo $NEUTRON_ROOTWRAP-daemon $Q_RR_CONF_FILE" fi fi # Distributed Virtual Router (DVR) configuration # Can be: # - ``legacy`` - No DVR functionality # - ``dvr_snat`` - Controller or single node DVR # - ``dvr`` - Compute node in multi-node DVR # Q_DVR_MODE=${Q_DVR_MODE:-legacy} if [[ "$Q_DVR_MODE" != "legacy" ]]; then Q_ML2_PLUGIN_MECHANISM_DRIVERS=openvswitch,linuxbridge,l2population fi # Provider Network Configurations # -------------------------------- # The following variables control the Neutron ML2 plugins' allocation # of tenant networks and availability of provider networks. If these # are not configured in ``localrc``, tenant networks will be local to # the host (with no remote connectivity), and no physical resources # will be available for the allocation of provider networks. # To disable tunnels (GRE or VXLAN) for tenant networks, # set to False in ``local.conf``. # GRE tunnels are only supported by the openvswitch. ENABLE_TENANT_TUNNELS=${ENABLE_TENANT_TUNNELS:-True} # If using GRE, VXLAN or GENEVE tunnels for tenant networks, # specify the range of IDs from which tenant networks are # allocated. Can be overridden in ``localrc`` if necessary. TENANT_TUNNEL_RANGES=${TENANT_TUNNEL_RANGES:-1:1000} # To use VLANs for tenant networks, set to True in localrc. VLANs # are supported by the ML2 plugins, requiring additional configuration # described below. ENABLE_TENANT_VLANS=${ENABLE_TENANT_VLANS:-False} # If using VLANs for tenant networks, set in ``localrc`` to specify # the range of VLAN VIDs from which tenant networks are # allocated. An external network switch must be configured to # trunk these VLANs between hosts for multi-host connectivity. # # Example: ``TENANT_VLAN_RANGE=1000:1999`` TENANT_VLAN_RANGE=${TENANT_VLAN_RANGE:-} # If using VLANs for tenant networks, or if using flat or VLAN # provider networks, set in ``localrc`` to the name of the physical # network, and also configure ``OVS_PHYSICAL_BRIDGE`` for the # openvswitch agent or ``LB_PHYSICAL_INTERFACE`` for the linuxbridge # agent, as described below. # # Example: ``PHYSICAL_NETWORK=default`` PHYSICAL_NETWORK=${PHYSICAL_NETWORK:-public} # With the openvswitch agent, if using VLANs for tenant networks, # or if using flat or VLAN provider networks, set in ``localrc`` to # the name of the OVS bridge to use for the physical network. The # bridge will be created if it does not already exist, but a # physical interface must be manually added to the bridge as a # port for external connectivity. # # Example: ``OVS_PHYSICAL_BRIDGE=br-eth1`` OVS_PHYSICAL_BRIDGE=${OVS_PHYSICAL_BRIDGE:-br-ex} default_route_dev=$(ip route | grep ^default | awk '{print $5}') die_if_not_set $LINENO default_route_dev "Failure retrieving default route device" # With the linuxbridge agent, if using VLANs for tenant networks, # or if using flat or VLAN provider networks, set in ``localrc`` to # the name of the network interface to use for the physical # network. # # Example: ``LB_PHYSICAL_INTERFACE=eth1`` LB_PHYSICAL_INTERFACE=${LB_PHYSICAL_INTERFACE:-$default_route_dev} # When Neutron tunnels are enabled it is needed to specify the # IP address of the end point in the local server. This IP is set # by default to the same IP address that the HOST IP. # This variable can be used to specify a different end point IP address # Example: ``TUNNEL_ENDPOINT_IP=1.1.1.1`` TUNNEL_ENDPOINT_IP=${TUNNEL_ENDPOINT_IP:-$HOST_IP} # With the openvswitch plugin, set to True in ``localrc`` to enable # provider GRE tunnels when ``ENABLE_TENANT_TUNNELS`` is False. # # Example: ``OVS_ENABLE_TUNNELING=True`` OVS_ENABLE_TUNNELING=${OVS_ENABLE_TUNNELING:-$ENABLE_TENANT_TUNNELS} # Use DHCP agent for providing metadata service in the case of # without L3 agent (No Route Agent), set to True in localrc. ENABLE_ISOLATED_METADATA=${ENABLE_ISOLATED_METADATA:-False} # Add a static route as dhcp option, so the request to 169.254.169.254 # will be able to reach through a route(DHCP agent) # This option require ENABLE_ISOLATED_METADATA = True ENABLE_METADATA_NETWORK=${ENABLE_METADATA_NETWORK:-False} # Neutron plugin specific functions # --------------------------------- # Please refer to ``lib/neutron_plugins/README.md`` for details. if [ -f $TOP_DIR/lib/neutron_plugins/$Q_PLUGIN ]; then source $TOP_DIR/lib/neutron_plugins/$Q_PLUGIN fi # Agent metering service plugin functions # ------------------------------------------- # Hardcoding for 1 service plugin for now source $TOP_DIR/lib/neutron_plugins/services/metering # L3 Service functions source $TOP_DIR/lib/neutron_plugins/services/l3 # Use security group or not if has_neutron_plugin_security_group; then Q_USE_SECGROUP=${Q_USE_SECGROUP:-True} else Q_USE_SECGROUP=False fi # Save trace setting _XTRACE_NEUTRON=$(set +o | grep xtrace) set +o xtrace # Functions # --------- function _determine_config_server { local cfg_file local opts="--config-file $NEUTRON_CONF --config-file /$Q_PLUGIN_CONF_FILE" for cfg_file in ${Q_PLUGIN_EXTRA_CONF_FILES[@]}; do opts+=" --config-file $cfg_file" done echo "$opts" } function _determine_config_l3 { local opts="--config-file $NEUTRON_CONF --config-file $Q_L3_CONF_FILE" echo "$opts" } # For services and agents that require it, dynamically construct a list of # --config-file arguments that are passed to the binary. function determine_config_files { local opts="" case "$1" in "neutron-server") opts="$(_determine_config_server)" ;; "neutron-l3-agent") opts="$(_determine_config_l3)" ;; esac if [ -z "$opts" ] ; then die $LINENO "Could not determine config files for $1." fi echo "$opts" } # configure_mutnauq() # Set common config for all neutron server and agents. function configure_mutnauq { _configure_neutron_common iniset_rpc_backend neutron $NEUTRON_CONF # goes before q-svc to init Q_SERVICE_PLUGIN_CLASSES if is_service_enabled q-metering; then _configure_neutron_metering fi if is_service_enabled q-agt q-svc; then _configure_neutron_service fi if is_service_enabled q-agt; then _configure_neutron_plugin_agent fi if is_service_enabled q-dhcp; then _configure_neutron_dhcp_agent fi if is_service_enabled q-l3; then _configure_neutron_l3_agent fi if is_service_enabled q-meta; then _configure_neutron_metadata_agent fi if [[ "$Q_DVR_MODE" != "legacy" ]]; then _configure_dvr fi if is_service_enabled ceilometer; then _configure_neutron_ceilometer_notifications fi iniset $NEUTRON_CONF DEFAULT api_workers "$API_WORKERS" } function create_nova_conf_neutron { iniset $NOVA_CONF DEFAULT use_neutron True iniset $NOVA_CONF neutron auth_type "password" iniset $NOVA_CONF neutron auth_url "$KEYSTONE_AUTH_URI/v3" iniset $NOVA_CONF neutron username "$Q_ADMIN_USERNAME" iniset $NOVA_CONF neutron password "$SERVICE_PASSWORD" iniset $NOVA_CONF neutron user_domain_name "$SERVICE_DOMAIN_NAME" iniset $NOVA_CONF neutron project_name "$SERVICE_PROJECT_NAME" iniset $NOVA_CONF neutron project_domain_name "$SERVICE_DOMAIN_NAME" iniset $NOVA_CONF neutron auth_strategy "$Q_AUTH_STRATEGY" iniset $NOVA_CONF neutron region_name "$REGION_NAME" iniset $NOVA_CONF neutron url "${Q_PROTOCOL}://$Q_HOST:$Q_PORT" if [[ "$Q_USE_SECGROUP" == "True" ]]; then LIBVIRT_FIREWALL_DRIVER=nova.virt.firewall.NoopFirewallDriver iniset $NOVA_CONF DEFAULT firewall_driver $LIBVIRT_FIREWALL_DRIVER fi # optionally set options in nova_conf neutron_plugin_create_nova_conf if is_service_enabled q-meta; then iniset $NOVA_CONF neutron service_metadata_proxy "True" fi iniset $NOVA_CONF DEFAULT vif_plugging_is_fatal "$VIF_PLUGGING_IS_FATAL" iniset $NOVA_CONF DEFAULT vif_plugging_timeout "$VIF_PLUGGING_TIMEOUT" } # create_mutnauq_accounts() - Set up common required neutron accounts # Tenant User Roles # ------------------------------------------------------------------ # service neutron admin # if enabled # Migrated from keystone_data.sh function create_mutnauq_accounts { if [[ "$ENABLED_SERVICES" =~ "q-svc" ]]; then create_service_user "neutron" get_or_create_service "neutron" "network" "Neutron Service" get_or_create_endpoint \ "network" \ "$REGION_NAME" \ "$Q_PROTOCOL://$SERVICE_HOST:$Q_PORT/" \ "$Q_PROTOCOL://$SERVICE_HOST:$Q_PORT/" \ "$Q_PROTOCOL://$SERVICE_HOST:$Q_PORT/" fi } # init_mutnauq() - Initialize databases, etc. function init_mutnauq { recreate_database $Q_DB_NAME # Run Neutron db migrations $NEUTRON_BIN_DIR/neutron-db-manage --config-file $NEUTRON_CONF --config-file /$Q_PLUGIN_CONF_FILE upgrade head } # install_mutnauq() - Collect source and prepare function install_mutnauq { # Install neutron-lib from git so we make sure we're testing # the latest code. if use_library_from_git "neutron-lib"; then git_clone_by_name "neutron-lib" setup_dev_lib "neutron-lib" fi git_clone $NEUTRON_REPO $NEUTRON_DIR $NEUTRON_BRANCH setup_develop $NEUTRON_DIR if [ "$VIRT_DRIVER" == 'xenserver' ]; then local dom0_ip dom0_ip=$(echo "$XENAPI_CONNECTION_URL" | cut -d "/" -f 3-) local ssh_dom0 ssh_dom0="sudo -u $DOMZERO_USER ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null root@$dom0_ip" # Find where the plugins should go in dom0 local xen_functions xen_functions=$(cat $TOP_DIR/tools/xen/functions) local plugin_dir plugin_dir=$($ssh_dom0 "$xen_functions; set -eux; xapi_plugin_location") # install neutron plugins to dom0 tar -czf - -C $NEUTRON_DIR/neutron/plugins/ml2/drivers/openvswitch/agent/xenapi/etc/xapi.d/plugins/ ./ | $ssh_dom0 "tar -xzf - -C $plugin_dir && chmod a+x $plugin_dir/*" fi } # install_neutron_agent_packages() - Collect source and prepare function install_neutron_agent_packages { # radvd doesn't come with the OS. Install it if the l3 service is enabled. if is_service_enabled q-l3; then install_package radvd fi # install packages that are specific to plugin agent(s) if is_service_enabled q-agt q-dhcp q-l3; then neutron_plugin_install_agent_packages fi } # Start running processes, including screen function start_neutron_service_and_check { local service_port=$Q_PORT local service_protocol=$Q_PROTOCOL local cfg_file_options cfg_file_options="$(determine_config_files neutron-server)" if is_service_enabled tls-proxy; then service_port=$Q_PORT_INT service_protocol="http" fi # Start the Neutron service run_process q-svc "$NEUTRON_BIN_DIR/neutron-server $cfg_file_options" echo "Waiting for Neutron to start..." if is_ssl_enabled_service "neutron"; then ssl_ca="--ca-certificate=${SSL_BUNDLE_FILE}" fi local testcmd="wget ${ssl_ca} --no-proxy -q -O- $service_protocol://$Q_HOST:$service_port" test_with_retry "$testcmd" "Neutron did not start" $SERVICE_TIMEOUT # Start proxy if enabled if is_service_enabled tls-proxy; then start_tls_proxy neutron '*' $Q_PORT $Q_HOST $Q_PORT_INT fi } # Control of the l2 agent is separated out to make it easier to test partial # upgrades (everything upgraded except the L2 agent) function start_mutnauq_l2_agent { run_process q-agt "$AGENT_BINARY --config-file $NEUTRON_CONF --config-file /$Q_PLUGIN_CONF_FILE" if is_provider_network && [[ $Q_AGENT == "openvswitch" ]]; then sudo ovs-vsctl --no-wait -- --may-exist add-port $OVS_PHYSICAL_BRIDGE $PUBLIC_INTERFACE sudo ip link set $OVS_PHYSICAL_BRIDGE up sudo ip link set br-int up sudo ip link set $PUBLIC_INTERFACE up if is_ironic_hardware; then for IP in $(ip addr show dev $PUBLIC_INTERFACE | grep ' inet ' | awk '{print $2}'); do sudo ip addr del $IP dev $PUBLIC_INTERFACE sudo ip addr add $IP dev $OVS_PHYSICAL_BRIDGE done sudo ip route replace $FIXED_RANGE via $NETWORK_GATEWAY dev $OVS_PHYSICAL_BRIDGE fi fi } function start_mutnauq_other_agents { run_process q-dhcp "$AGENT_DHCP_BINARY --config-file $NEUTRON_CONF --config-file $Q_DHCP_CONF_FILE" if is_service_enabled neutron-vpnaas; then : # Started by plugin else run_process q-l3 "$AGENT_L3_BINARY $(determine_config_files neutron-l3-agent)" fi run_process q-meta "$AGENT_META_BINARY --config-file $NEUTRON_CONF --config-file $Q_META_CONF_FILE" run_process q-metering "$AGENT_METERING_BINARY --config-file $NEUTRON_CONF --config-file $METERING_AGENT_CONF_FILENAME" if [ "$VIRT_DRIVER" = 'xenserver' ]; then # For XenServer, start an agent for the domU openvswitch run_process q-domua "$AGENT_BINARY --config-file $NEUTRON_CONF --config-file /$Q_PLUGIN_CONF_FILE.domU" fi } # Start running processes, including screen function start_neutron_agents { # Start up the neutron agents if enabled start_mutnauq_l2_agent start_mutnauq_other_agents } function stop_mutnauq_l2_agent { stop_process q-agt } # stop_mutnauq_other() - Stop running processes (non-screen) function stop_mutnauq_other { if is_service_enabled q-dhcp; then stop_process q-dhcp pid=$(ps aux | awk '/[d]nsmasq.+interface=(tap|ns-)/ { print $2 }') [ ! -z "$pid" ] && sudo kill -9 $pid fi stop_process q-svc if is_service_enabled q-l3; then sudo pkill -f "radvd -C $DATA_DIR/neutron/ra" stop_process q-l3 fi if is_service_enabled q-meta; then sudo pkill -9 -f neutron-ns-metadata-proxy || : stop_process q-meta fi if is_service_enabled q-metering; then neutron_metering_stop fi if [[ "$Q_USE_ROOTWRAP_DAEMON" == "True" ]]; then sudo pkill -9 -f $NEUTRON_ROOTWRAP-daemon || : fi } # stop_neutron() - Stop running processes (non-screen) function stop_mutnauq { stop_mutnauq_other stop_mutnauq_l2_agent } # _move_neutron_addresses_route() - Move the primary IP to the OVS bridge # on startup, or back to the public interface on cleanup. If no IP is # configured on the interface, just add it as a port to the OVS bridge. function _move_neutron_addresses_route { local from_intf=$1 local to_intf=$2 local add_ovs_port=$3 local del_ovs_port=$4 local af=$5 if [[ -n "$from_intf" && -n "$to_intf" ]]; then # Remove the primary IP address from $from_intf and add it to $to_intf, # along with the default route, if it exists. Also, when called # on configure we will also add $from_intf as a port on $to_intf, # assuming it is an OVS bridge. local IP_REPLACE="" local IP_DEL="" local IP_UP="" local DEFAULT_ROUTE_GW DEFAULT_ROUTE_GW=$(ip -f $af r | awk "/default.+$from_intf/ { print \$3; exit }") local ADD_OVS_PORT="" local DEL_OVS_PORT="" local ARP_CMD="" IP_BRD=$(ip -f $af a s dev $from_intf scope global primary | grep inet | awk '{ print $2, $3, $4; exit }') if [ "$DEFAULT_ROUTE_GW" != "" ]; then ADD_DEFAULT_ROUTE="sudo ip -f $af r replace default via $DEFAULT_ROUTE_GW dev $to_intf" fi if [[ "$add_ovs_port" == "True" ]]; then ADD_OVS_PORT="sudo ovs-vsctl --may-exist add-port $to_intf $from_intf" fi if [[ "$del_ovs_port" == "True" ]]; then DEL_OVS_PORT="sudo ovs-vsctl --if-exists del-port $from_intf $to_intf" fi if [[ "$IP_BRD" != "" ]]; then IP_DEL="sudo ip addr del $IP_BRD dev $from_intf" IP_REPLACE="sudo ip addr replace $IP_BRD dev $to_intf" IP_UP="sudo ip link set $to_intf up" if [[ "$af" == "inet" ]]; then IP=$(echo $IP_BRD | awk '{ print $1; exit }' | grep -o -E '(.*)/' | cut -d "/" -f1) ARP_CMD="arping -A -c 3 -w 4.5 -I $to_intf $IP " fi fi # The add/del OVS port calls have to happen either before or # after the address is moved in order to not leave it orphaned. $DEL_OVS_PORT; $IP_DEL; $IP_REPLACE; $IP_UP; $ADD_OVS_PORT; $ADD_DEFAULT_ROUTE; $ARP_CMD fi } # cleanup_mutnauq() - Remove residual data files, anything left over from previous # runs that a clean run would need to clean up function cleanup_mutnauq { if [[ -n "$OVS_PHYSICAL_BRIDGE" ]]; then _move_neutron_addresses_route "$OVS_PHYSICAL_BRIDGE" "$PUBLIC_INTERFACE" False True "inet" if [[ $(ip -f inet6 a s dev "$OVS_PHYSICAL_BRIDGE" | grep -c 'global') != 0 ]]; then # ip(8) wants the prefix length when deleting local v6_gateway v6_gateway=$(ip -6 a s dev $OVS_PHYSICAL_BRIDGE | grep $IPV6_PUBLIC_NETWORK_GATEWAY | awk '{ print $2 }') sudo ip -6 addr del $v6_gateway dev $OVS_PHYSICAL_BRIDGE _move_neutron_addresses_route "$OVS_PHYSICAL_BRIDGE" "$PUBLIC_INTERFACE" False False "inet6" fi if is_provider_network && is_ironic_hardware; then for IP in $(ip addr show dev $OVS_PHYSICAL_BRIDGE | grep ' inet ' | awk '{print $2}'); do sudo ip addr del $IP dev $OVS_PHYSICAL_BRIDGE sudo ip addr add $IP dev $PUBLIC_INTERFACE done sudo route del -net $FIXED_RANGE gw $NETWORK_GATEWAY dev $OVS_PHYSICAL_BRIDGE fi fi if is_neutron_ovs_base_plugin; then neutron_ovs_base_cleanup fi if [[ $Q_AGENT == "linuxbridge" ]]; then neutron_lb_cleanup fi # delete all namespaces created by neutron for ns in $(sudo ip netns list | grep -o -E '(qdhcp|qrouter|fip|snat)-[0-9a-f-]*'); do sudo ip netns delete ${ns} done } function _create_neutron_conf_dir { # Put config files in ``NEUTRON_CONF_DIR`` for everyone to find sudo install -d -o $STACK_USER $NEUTRON_CONF_DIR } # _configure_neutron_common() # Set common config for all neutron server and agents. # This MUST be called before other ``_configure_neutron_*`` functions. function _configure_neutron_common { _create_neutron_conf_dir # Uses oslo config generator to generate core sample configuration files (cd $NEUTRON_DIR && exec ./tools/generate_config_file_samples.sh) cp $NEUTRON_DIR/etc/neutron.conf.sample $NEUTRON_CONF Q_POLICY_FILE=$NEUTRON_CONF_DIR/policy.json cp $NEUTRON_DIR/etc/policy.json $Q_POLICY_FILE # allow neutron user to administer neutron to match neutron account sed -i 's/"context_is_admin": "role:admin"/"context_is_admin": "role:admin or user_name:neutron"/g' $Q_POLICY_FILE # Set plugin-specific variables ``Q_DB_NAME``, ``Q_PLUGIN_CLASS``. # For main plugin config file, set ``Q_PLUGIN_CONF_PATH``, ``Q_PLUGIN_CONF_FILENAME``. # For additional plugin config files, set ``Q_PLUGIN_EXTRA_CONF_PATH`` and # ``Q_PLUGIN_EXTRA_CONF_FILES``. For example: # # ``Q_PLUGIN_EXTRA_CONF_PATH=/path/to/plugins`` # ``Q_PLUGIN_EXTRA_CONF_FILES=(file1 file2)`` neutron_plugin_configure_common if [[ "$Q_PLUGIN_CONF_PATH" == '' || "$Q_PLUGIN_CONF_FILENAME" == '' || "$Q_PLUGIN_CLASS" == '' ]]; then die $LINENO "Neutron plugin not set.. exiting" fi # If needed, move config file from ``$NEUTRON_DIR/etc/neutron`` to ``NEUTRON_CONF_DIR`` mkdir -p /$Q_PLUGIN_CONF_PATH Q_PLUGIN_CONF_FILE=$Q_PLUGIN_CONF_PATH/$Q_PLUGIN_CONF_FILENAME # NOTE(hichihara): Some neutron vendor plugins were already decomposed and # there is no config file in Neutron tree. They should prepare the file in each plugin. if [ -f "$NEUTRON_DIR/$Q_PLUGIN_CONF_FILE.sample" ]; then cp "$NEUTRON_DIR/$Q_PLUGIN_CONF_FILE.sample" /$Q_PLUGIN_CONF_FILE elif [ -f $NEUTRON_DIR/$Q_PLUGIN_CONF_FILE ]; then cp $NEUTRON_DIR/$Q_PLUGIN_CONF_FILE /$Q_PLUGIN_CONF_FILE fi iniset $NEUTRON_CONF database connection `database_connection_url $Q_DB_NAME` iniset $NEUTRON_CONF DEFAULT state_path $DATA_DIR/neutron iniset $NEUTRON_CONF DEFAULT use_syslog $SYSLOG iniset $NEUTRON_CONF DEFAULT bind_host $Q_LISTEN_ADDRESS iniset $NEUTRON_CONF oslo_concurrency lock_path $DATA_DIR/neutron/lock # NOTE(freerunner): Need to adjust Region Name for nova in multiregion installation iniset $NEUTRON_CONF nova region_name $REGION_NAME # If addition config files are set, make sure their path name is set as well if [[ ${#Q_PLUGIN_EXTRA_CONF_FILES[@]} > 0 && $Q_PLUGIN_EXTRA_CONF_PATH == '' ]]; then die $LINENO "Neutron additional plugin config not set.. exiting" fi # If additional config files exist, copy them over to neutron configuration # directory if [[ $Q_PLUGIN_EXTRA_CONF_PATH != '' ]]; then local f for (( f=0; $f < ${#Q_PLUGIN_EXTRA_CONF_FILES[@]}; f+=1 )); do Q_PLUGIN_EXTRA_CONF_FILES[$f]=$Q_PLUGIN_EXTRA_CONF_PATH/${Q_PLUGIN_EXTRA_CONF_FILES[$f]} done fi if [ "$VIRT_DRIVER" = 'fake' ]; then # Disable arbitrary limits iniset $NEUTRON_CONF quotas quota_network -1 iniset $NEUTRON_CONF quotas quota_subnet -1 iniset $NEUTRON_CONF quotas quota_port -1 iniset $NEUTRON_CONF quotas quota_security_group -1 iniset $NEUTRON_CONF quotas quota_security_group_rule -1 fi # Format logging if [ "$LOG_COLOR" == "True" ] && [ "$SYSLOG" == "False" ]; then setup_colorized_logging $NEUTRON_CONF DEFAULT project_id else # Show user_name and project_name by default like in nova iniset $NEUTRON_CONF DEFAULT logging_user_identity_format "%(user_name)s %(project_name)s" fi if is_service_enabled tls-proxy; then # Set the service port for a proxy to take the original iniset $NEUTRON_CONF DEFAULT bind_port "$Q_PORT_INT" fi if is_ssl_enabled_service "nova"; then iniset $NEUTRON_CONF nova cafile $SSL_BUNDLE_FILE fi if is_ssl_enabled_service "neutron"; then ensure_certificates NEUTRON iniset $NEUTRON_CONF DEFAULT use_ssl True iniset $NEUTRON_CONF DEFAULT ssl_cert_file "$NEUTRON_SSL_CERT" iniset $NEUTRON_CONF DEFAULT ssl_key_file "$NEUTRON_SSL_KEY" fi _neutron_setup_rootwrap } function _configure_neutron_dhcp_agent { cp $NEUTRON_DIR/etc/dhcp_agent.ini.sample $Q_DHCP_CONF_FILE iniset $Q_DHCP_CONF_FILE DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL # make it so we have working DNS from guests iniset $Q_DHCP_CONF_FILE DEFAULT dnsmasq_local_resolv True iniset $Q_DHCP_CONF_FILE AGENT root_helper "$Q_RR_COMMAND" if [[ "$Q_USE_ROOTWRAP_DAEMON" == "True" ]]; then iniset $Q_DHCP_CONF_FILE AGENT root_helper_daemon "$Q_RR_DAEMON_COMMAND" fi if ! is_service_enabled q-l3; then if [[ "$ENABLE_ISOLATED_METADATA" = "True" ]]; then iniset $Q_DHCP_CONF_FILE DEFAULT enable_isolated_metadata $ENABLE_ISOLATED_METADATA iniset $Q_DHCP_CONF_FILE DEFAULT enable_metadata_network $ENABLE_METADATA_NETWORK else if [[ "$ENABLE_METADATA_NETWORK" = "True" ]]; then die "$LINENO" "Enable isolated metadata is a must for metadata network" fi fi fi _neutron_setup_interface_driver $Q_DHCP_CONF_FILE neutron_plugin_configure_dhcp_agent $Q_DHCP_CONF_FILE } function _configure_neutron_metadata_agent { cp $NEUTRON_DIR/etc/metadata_agent.ini.sample $Q_META_CONF_FILE iniset $Q_META_CONF_FILE DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL iniset $Q_META_CONF_FILE DEFAULT nova_metadata_ip $Q_META_DATA_IP iniset $Q_META_CONF_FILE AGENT root_helper "$Q_RR_COMMAND" if [[ "$Q_USE_ROOTWRAP_DAEMON" == "True" ]]; then iniset $Q_META_CONF_FILE AGENT root_helper_daemon "$Q_RR_DAEMON_COMMAND" fi } function _configure_neutron_ceilometer_notifications { iniset $NEUTRON_CONF oslo_messaging_notifications driver messaging } function _configure_neutron_metering { neutron_agent_metering_configure_common neutron_agent_metering_configure_agent } function _configure_dvr { iniset $NEUTRON_CONF DEFAULT router_distributed True iniset $Q_L3_CONF_FILE DEFAULT agent_mode $Q_DVR_MODE } # _configure_neutron_plugin_agent() - Set config files for neutron plugin agent # It is called when q-agt is enabled. function _configure_neutron_plugin_agent { # Specify the default root helper prior to agent configuration to # ensure that an agent's configuration can override the default iniset /$Q_PLUGIN_CONF_FILE agent root_helper "$Q_RR_COMMAND" if [[ "$Q_USE_ROOTWRAP_DAEMON" == "True" ]]; then iniset /$Q_PLUGIN_CONF_FILE agent root_helper_daemon "$Q_RR_DAEMON_COMMAND" fi iniset $NEUTRON_CONF DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL # Configure agent for plugin neutron_plugin_configure_plugin_agent } # _configure_neutron_service() - Set config files for neutron service # It is called when q-svc is enabled. function _configure_neutron_service { Q_API_PASTE_FILE=$NEUTRON_CONF_DIR/api-paste.ini cp $NEUTRON_DIR/etc/api-paste.ini $Q_API_PASTE_FILE # Update either configuration file with plugin iniset $NEUTRON_CONF DEFAULT core_plugin $Q_PLUGIN_CLASS if [[ $Q_SERVICE_PLUGIN_CLASSES != '' ]]; then iniset $NEUTRON_CONF DEFAULT service_plugins $Q_SERVICE_PLUGIN_CLASSES fi iniset $NEUTRON_CONF DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL iniset $NEUTRON_CONF oslo_policy policy_file $Q_POLICY_FILE iniset $NEUTRON_CONF DEFAULT allow_overlapping_ips $Q_ALLOW_OVERLAPPING_IP iniset $NEUTRON_CONF DEFAULT auth_strategy $Q_AUTH_STRATEGY _neutron_setup_keystone $NEUTRON_CONF keystone_authtoken # Configuration for neutron notifications to nova. iniset $NEUTRON_CONF DEFAULT notify_nova_on_port_status_changes $Q_NOTIFY_NOVA_PORT_STATUS_CHANGES iniset $NEUTRON_CONF DEFAULT notify_nova_on_port_data_changes $Q_NOTIFY_NOVA_PORT_DATA_CHANGES configure_auth_token_middleware $NEUTRON_CONF nova $NEUTRON_AUTH_CACHE_DIR nova # Configure plugin neutron_plugin_configure_service } # Utility Functions #------------------ # _neutron_service_plugin_class_add() - add service plugin class function _neutron_service_plugin_class_add { local service_plugin_class=$1 if [[ $Q_SERVICE_PLUGIN_CLASSES == '' ]]; then Q_SERVICE_PLUGIN_CLASSES=$service_plugin_class elif [[ ! ,${Q_SERVICE_PLUGIN_CLASSES}, =~ ,${service_plugin_class}, ]]; then Q_SERVICE_PLUGIN_CLASSES="$Q_SERVICE_PLUGIN_CLASSES,$service_plugin_class" fi } # _neutron_deploy_rootwrap_filters() - deploy rootwrap filters to $Q_CONF_ROOTWRAP_D (owned by root). function _neutron_deploy_rootwrap_filters { if [[ "$Q_USE_ROOTWRAP" == "False" ]]; then return fi local srcdir=$1 sudo install -d -o root -m 755 $Q_CONF_ROOTWRAP_D sudo install -o root -m 644 $srcdir/etc/neutron/rootwrap.d/* $Q_CONF_ROOTWRAP_D/ } # _neutron_setup_rootwrap() - configure Neutron's rootwrap function _neutron_setup_rootwrap { if [[ "$Q_USE_ROOTWRAP" == "False" ]]; then return fi # Wipe any existing ``rootwrap.d`` files first Q_CONF_ROOTWRAP_D=$NEUTRON_CONF_DIR/rootwrap.d if [[ -d $Q_CONF_ROOTWRAP_D ]]; then sudo rm -rf $Q_CONF_ROOTWRAP_D fi _neutron_deploy_rootwrap_filters $NEUTRON_DIR # Set up ``rootwrap.conf``, pointing to ``$NEUTRON_CONF_DIR/rootwrap.d`` # location moved in newer versions, prefer new location if test -r $NEUTRON_DIR/etc/neutron/rootwrap.conf; then sudo install -o root -g root -m 644 $NEUTRON_DIR/etc/neutron/rootwrap.conf $Q_RR_CONF_FILE else sudo install -o root -g root -m 644 $NEUTRON_DIR/etc/rootwrap.conf $Q_RR_CONF_FILE fi sudo sed -e "s:^filters_path=.*$:filters_path=$Q_CONF_ROOTWRAP_D:" -i $Q_RR_CONF_FILE sudo sed -e 's:^exec_dirs=\(.*\)$:exec_dirs=\1,/usr/local/bin:' -i $Q_RR_CONF_FILE # Specify ``rootwrap.conf`` as first parameter to neutron-rootwrap ROOTWRAP_SUDOER_CMD="$NEUTRON_ROOTWRAP $Q_RR_CONF_FILE *" ROOTWRAP_DAEMON_SUDOER_CMD="$NEUTRON_ROOTWRAP-daemon $Q_RR_CONF_FILE" # Set up the rootwrap sudoers for neutron TEMPFILE=`mktemp` echo "$STACK_USER ALL=(root) NOPASSWD: $ROOTWRAP_SUDOER_CMD" >$TEMPFILE echo "$STACK_USER ALL=(root) NOPASSWD: $ROOTWRAP_DAEMON_SUDOER_CMD" >>$TEMPFILE chmod 0440 $TEMPFILE sudo chown root:root $TEMPFILE sudo mv $TEMPFILE /etc/sudoers.d/neutron-rootwrap # Update the root_helper iniset $NEUTRON_CONF agent root_helper "$Q_RR_COMMAND" if [[ "$Q_USE_ROOTWRAP_DAEMON" == "True" ]]; then iniset $NEUTRON_CONF agent root_helper_daemon "$Q_RR_DAEMON_COMMAND" fi } # Configures keystone integration for neutron service function _neutron_setup_keystone { local conf_file=$1 local section=$2 create_neutron_cache_dir configure_auth_token_middleware $conf_file $Q_ADMIN_USERNAME $NEUTRON_AUTH_CACHE_DIR $section } function _neutron_setup_interface_driver { # ovs_use_veth needs to be set before the plugin configuration # occurs to allow plugins to override the setting. iniset $1 DEFAULT ovs_use_veth $Q_OVS_USE_VETH neutron_plugin_setup_interface_driver $1 } # Functions for Neutron Exercises #-------------------------------- function delete_probe { local from_net="$1" net_id=`_get_net_id $from_net` probe_id=`neutron-debug --os-tenant-name admin --os-username admin --os-password $ADMIN_PASSWORD probe-list -c id -c network_id | grep $net_id | awk '{print $2}'` neutron-debug --os-tenant-name admin --os-username admin probe-delete $probe_id } function _get_net_id { neutron --os-cloud devstack-admin --os-region "$REGION_NAME" --os-tenant-name admin --os-username admin --os-password $ADMIN_PASSWORD net-list | grep $1 | awk '{print $2}' } function _get_probe_cmd_prefix { local from_net="$1" net_id=`_get_net_id $from_net` probe_id=`neutron-debug --os-tenant-name admin --os-username admin --os-password $ADMIN_PASSWORD probe-list -c id -c network_id | grep $net_id | awk '{print $2}' | head -n 1` echo "$Q_RR_COMMAND ip netns exec qprobe-$probe_id" } # ssh check function _ssh_check_neutron { local from_net=$1 local key_file=$2 local ip=$3 local user=$4 local timeout_sec=$5 local probe_cmd = "" probe_cmd=`_get_probe_cmd_prefix $from_net` local testcmd="$probe_cmd ssh -o StrictHostKeyChecking=no -i $key_file ${user}@$ip echo success" test_with_retry "$testcmd" "server $ip didn't become ssh-able" $timeout_sec } # Restore xtrace $_XTRACE_NEUTRON # Tell emacs to use shell-script-mode ## Local variables: ## mode: shell-script ## End: