devstack/lib/neutron-legacy

961 lines
34 KiB
Bash

#!/bin/bash
#
# lib/neutron
# functions - functions specific to neutron
# Dependencies:
# ``functions`` file
# ``DEST`` must be defined
# ``STACK_USER`` must be defined
# ``stack.sh`` calls the entry points in this order:
#
# - install_neutron_agent_packages
# - install_neutronclient
# - install_neutron
# - install_neutron_third_party
# - configure_neutron
# - init_neutron
# - configure_neutron_third_party
# - init_neutron_third_party
# - start_neutron_third_party
# - create_nova_conf_neutron
# - configure_neutron_after_post_config
# - start_neutron_service_and_check
# - check_neutron_third_party_integration
# - start_neutron_agents
# - create_neutron_initial_network
#
# ``unstack.sh`` calls the entry points in this order:
#
# - stop_neutron
# - stop_neutron_third_party
# - cleanup_neutron
# Functions in lib/neutron are classified into the following categories:
#
# - entry points (called from stack.sh or unstack.sh)
# - internal functions
# - neutron exercises
# - 3rd party programs
# Neutron Networking
# ------------------
# Make sure that neutron is enabled in ``ENABLED_SERVICES``. If you want
# to run Neutron on this host, make sure that q-svc is also in
# ``ENABLED_SERVICES``.
#
# See "Neutron Network Configuration" below for additional variables
# that must be set in localrc for connectivity across hosts with
# Neutron.
#
# With Neutron networking the NETWORK_MANAGER variable is ignored.
# Settings
# --------
# Neutron Network Configuration
# -----------------------------
deprecated "Using lib/neutron-legacy is deprecated, and it will be removed in the future"
if is_service_enabled tls-proxy; then
Q_PROTOCOL="https"
fi
# Set up default directories
GITDIR["python-neutronclient"]=$DEST/python-neutronclient
NEUTRON_DIR=$DEST/neutron
NEUTRON_FWAAS_DIR=$DEST/neutron-fwaas
NEUTRON_AUTH_CACHE_DIR=${NEUTRON_AUTH_CACHE_DIR:-/var/cache/neutron}
# Support entry points installation of console scripts
if [[ -d $NEUTRON_DIR/bin/neutron-server ]]; then
NEUTRON_BIN_DIR=$NEUTRON_DIR/bin
else
NEUTRON_BIN_DIR=$(get_python_exec_prefix)
fi
NEUTRON_CONF_DIR=/etc/neutron
NEUTRON_CONF=$NEUTRON_CONF_DIR/neutron.conf
export NEUTRON_TEST_CONFIG_FILE=${NEUTRON_TEST_CONFIG_FILE:-"$NEUTRON_CONF_DIR/debug.ini"}
# Agent binaries. Note, binary paths for other agents are set in per-service
# scripts in lib/neutron_plugins/services/
AGENT_DHCP_BINARY="$NEUTRON_BIN_DIR/neutron-dhcp-agent"
AGENT_L3_BINARY=${AGENT_L3_BINARY:-"$NEUTRON_BIN_DIR/neutron-l3-agent"}
AGENT_META_BINARY="$NEUTRON_BIN_DIR/neutron-metadata-agent"
# Agent config files. Note, plugin-specific Q_PLUGIN_CONF_FILE is set and
# loaded from per-plugin scripts in lib/neutron_plugins/
Q_DHCP_CONF_FILE=$NEUTRON_CONF_DIR/dhcp_agent.ini
Q_L3_CONF_FILE=$NEUTRON_CONF_DIR/l3_agent.ini
Q_META_CONF_FILE=$NEUTRON_CONF_DIR/metadata_agent.ini
# Default name for Neutron database
Q_DB_NAME=${Q_DB_NAME:-neutron}
# Default Neutron Plugin
Q_PLUGIN=${Q_PLUGIN:-ml2}
# Default Neutron Port
Q_PORT=${Q_PORT:-9696}
# Default Neutron Internal Port when using TLS proxy
Q_PORT_INT=${Q_PORT_INT:-19696}
# Default Neutron Host
Q_HOST=${Q_HOST:-$SERVICE_HOST}
# Default protocol
Q_PROTOCOL=${Q_PROTOCOL:-$SERVICE_PROTOCOL}
# Default listen address
Q_LISTEN_ADDRESS=${Q_LISTEN_ADDRESS:-$SERVICE_LISTEN_ADDRESS}
# Default admin username
Q_ADMIN_USERNAME=${Q_ADMIN_USERNAME:-neutron}
# Default auth strategy
Q_AUTH_STRATEGY=${Q_AUTH_STRATEGY:-keystone}
# RHEL's support for namespaces requires using veths with ovs
Q_OVS_USE_VETH=${Q_OVS_USE_VETH:-False}
Q_USE_ROOTWRAP=${Q_USE_ROOTWRAP:-True}
Q_USE_ROOTWRAP_DAEMON=$(trueorfalse True Q_USE_ROOTWRAP_DAEMON)
# Meta data IP
Q_META_DATA_IP=${Q_META_DATA_IP:-$SERVICE_HOST}
# Allow Overlapping IP among subnets
Q_ALLOW_OVERLAPPING_IP=${Q_ALLOW_OVERLAPPING_IP:-True}
Q_NOTIFY_NOVA_PORT_STATUS_CHANGES=${Q_NOTIFY_NOVA_PORT_STATUS_CHANGES:-True}
Q_NOTIFY_NOVA_PORT_DATA_CHANGES=${Q_NOTIFY_NOVA_PORT_DATA_CHANGES:-True}
VIF_PLUGGING_IS_FATAL=${VIF_PLUGGING_IS_FATAL:-True}
VIF_PLUGGING_TIMEOUT=${VIF_PLUGGING_TIMEOUT:-300}
# The directory which contains files for Q_PLUGIN_EXTRA_CONF_FILES.
# /etc/neutron is assumed by many of devstack plugins. Do not change.
_Q_PLUGIN_EXTRA_CONF_PATH=/etc/neutron
# List of config file names in addition to the main plugin config file
# To add additional plugin config files, use ``neutron_server_config_add``
# utility function. For example:
#
# ``neutron_server_config_add file1``
#
# These config files are relative to ``/etc/neutron``. The above
# example would specify ``--config-file /etc/neutron/file1`` for
# neutron server.
declare -a -g Q_PLUGIN_EXTRA_CONF_FILES
# same as Q_PLUGIN_EXTRA_CONF_FILES, but with absolute path.
declare -a -g _Q_PLUGIN_EXTRA_CONF_FILES_ABS
Q_RR_CONF_FILE=$NEUTRON_CONF_DIR/rootwrap.conf
if [[ "$Q_USE_ROOTWRAP" == "False" ]]; then
Q_RR_COMMAND="sudo"
else
NEUTRON_ROOTWRAP=$(get_rootwrap_location neutron)
Q_RR_COMMAND="sudo $NEUTRON_ROOTWRAP $Q_RR_CONF_FILE"
if [[ "$Q_USE_ROOTWRAP_DAEMON" == "True" ]]; then
Q_RR_DAEMON_COMMAND="sudo $NEUTRON_ROOTWRAP-daemon $Q_RR_CONF_FILE"
fi
fi
# Distributed Virtual Router (DVR) configuration
# Can be:
# - ``legacy`` - No DVR functionality
# - ``dvr_snat`` - Controller or single node DVR
# - ``dvr`` - Compute node in multi-node DVR
#
Q_DVR_MODE=${Q_DVR_MODE:-legacy}
if [[ "$Q_DVR_MODE" != "legacy" ]]; then
Q_ML2_PLUGIN_MECHANISM_DRIVERS=openvswitch,l2population
fi
# Provider Network Configurations
# --------------------------------
# The following variables control the Neutron ML2 plugins' allocation
# of tenant networks and availability of provider networks. If these
# are not configured in ``localrc``, tenant networks will be local to
# the host (with no remote connectivity), and no physical resources
# will be available for the allocation of provider networks.
# To disable tunnels (GRE or VXLAN) for tenant networks,
# set to False in ``local.conf``.
# GRE tunnels are only supported by the openvswitch.
ENABLE_TENANT_TUNNELS=${ENABLE_TENANT_TUNNELS:-True}
# If using GRE, VXLAN or GENEVE tunnels for tenant networks,
# specify the range of IDs from which tenant networks are
# allocated. Can be overridden in ``localrc`` if necessary.
TENANT_TUNNEL_RANGES=${TENANT_TUNNEL_RANGES:-1:1000}
# To use VLANs for tenant networks, set to True in localrc. VLANs
# are supported by the ML2 plugins, requiring additional configuration
# described below.
ENABLE_TENANT_VLANS=${ENABLE_TENANT_VLANS:-False}
# If using VLANs for tenant networks, set in ``localrc`` to specify
# the range of VLAN VIDs from which tenant networks are
# allocated. An external network switch must be configured to
# trunk these VLANs between hosts for multi-host connectivity.
#
# Example: ``TENANT_VLAN_RANGE=1000:1999``
TENANT_VLAN_RANGE=${TENANT_VLAN_RANGE:-}
# If using VLANs for tenant networks, or if using flat or VLAN
# provider networks, set in ``localrc`` to the name of the physical
# network, and also configure ``OVS_PHYSICAL_BRIDGE`` for the
# openvswitch agent or ``LB_PHYSICAL_INTERFACE`` for the linuxbridge
# agent, as described below.
#
# Example: ``PHYSICAL_NETWORK=default``
PHYSICAL_NETWORK=${PHYSICAL_NETWORK:-public}
# With the openvswitch agent, if using VLANs for tenant networks,
# or if using flat or VLAN provider networks, set in ``localrc`` to
# the name of the OVS bridge to use for the physical network. The
# bridge will be created if it does not already exist, but a
# physical interface must be manually added to the bridge as a
# port for external connectivity.
#
# Example: ``OVS_PHYSICAL_BRIDGE=br-eth1``
OVS_PHYSICAL_BRIDGE=${OVS_PHYSICAL_BRIDGE:-br-ex}
default_route_dev=$(ip route | grep ^default | awk '{print $5}')
die_if_not_set $LINENO default_route_dev "Failure retrieving default route device"
# With the linuxbridge agent, if using VLANs for tenant networks,
# or if using flat or VLAN provider networks, set in ``localrc`` to
# the name of the network interface to use for the physical
# network.
#
# Example: ``LB_PHYSICAL_INTERFACE=eth1``
LB_PHYSICAL_INTERFACE=${LB_PHYSICAL_INTERFACE:-$default_route_dev}
# When Neutron tunnels are enabled it is needed to specify the
# IP address of the end point in the local server. This IP is set
# by default to the same IP address that the HOST IP.
# This variable can be used to specify a different end point IP address
# Example: ``TUNNEL_ENDPOINT_IP=1.1.1.1``
TUNNEL_ENDPOINT_IP=${TUNNEL_ENDPOINT_IP:-$HOST_IP}
# With the openvswitch plugin, set to True in ``localrc`` to enable
# provider GRE tunnels when ``ENABLE_TENANT_TUNNELS`` is False.
#
# Example: ``OVS_ENABLE_TUNNELING=True``
OVS_ENABLE_TUNNELING=${OVS_ENABLE_TUNNELING:-$ENABLE_TENANT_TUNNELS}
# Use DHCP agent for providing metadata service in the case of
# without L3 agent (No Route Agent), set to True in localrc.
ENABLE_ISOLATED_METADATA=${ENABLE_ISOLATED_METADATA:-False}
# Add a static route as dhcp option, so the request to 169.254.169.254
# will be able to reach through a route(DHCP agent)
# This option require ENABLE_ISOLATED_METADATA = True
ENABLE_METADATA_NETWORK=${ENABLE_METADATA_NETWORK:-False}
# Neutron plugin specific functions
# ---------------------------------
# Please refer to ``lib/neutron_plugins/README.md`` for details.
if [ -f $TOP_DIR/lib/neutron_plugins/$Q_PLUGIN ]; then
source $TOP_DIR/lib/neutron_plugins/$Q_PLUGIN
fi
# Agent metering service plugin functions
# -------------------------------------------
# Hardcoding for 1 service plugin for now
source $TOP_DIR/lib/neutron_plugins/services/metering
# L3 Service functions
source $TOP_DIR/lib/neutron_plugins/services/l3
# Use security group or not
if has_neutron_plugin_security_group; then
Q_USE_SECGROUP=${Q_USE_SECGROUP:-True}
else
Q_USE_SECGROUP=False
fi
# Save trace setting
_XTRACE_NEUTRON=$(set +o | grep xtrace)
set +o xtrace
# Functions
# ---------
function _determine_config_server {
if [[ "$Q_PLUGIN_EXTRA_CONF_PATH" != '' ]]; then
if [[ "$Q_PLUGIN_EXTRA_CONF_PATH" = "$_Q_PLUGIN_EXTRA_CONF_PATH" ]]; then
deprecated "Q_PLUGIN_EXTRA_CONF_PATH is deprecated"
else
die $LINENO "Q_PLUGIN_EXTRA_CONF_PATH is deprecated"
fi
fi
if [[ ${#Q_PLUGIN_EXTRA_CONF_FILES[@]} > 0 ]]; then
deprecated "Q_PLUGIN_EXTRA_CONF_FILES is deprecated. Use neutron_server_config_add instead."
fi
for cfg_file in ${Q_PLUGIN_EXTRA_CONF_FILES[@]}; do
_Q_PLUGIN_EXTRA_CONF_FILES_ABS+=($_Q_PLUGIN_EXTRA_CONF_PATH/$cfg_file)
done
local cfg_file
local opts="--config-file $NEUTRON_CONF --config-file /$Q_PLUGIN_CONF_FILE"
for cfg_file in ${_Q_PLUGIN_EXTRA_CONF_FILES_ABS[@]}; do
opts+=" --config-file $cfg_file"
done
echo "$opts"
}
function _determine_config_l3 {
local opts="--config-file $NEUTRON_CONF --config-file $Q_L3_CONF_FILE"
echo "$opts"
}
# For services and agents that require it, dynamically construct a list of
# --config-file arguments that are passed to the binary.
function determine_config_files {
local opts=""
case "$1" in
"neutron-server") opts="$(_determine_config_server)" ;;
"neutron-l3-agent") opts="$(_determine_config_l3)" ;;
esac
if [ -z "$opts" ] ; then
die $LINENO "Could not determine config files for $1."
fi
echo "$opts"
}
# configure_mutnauq()
# Set common config for all neutron server and agents.
function configure_mutnauq {
_configure_neutron_common
iniset_rpc_backend neutron $NEUTRON_CONF
if is_service_enabled q-metering; then
_configure_neutron_metering
fi
if is_service_enabled q-agt q-svc; then
_configure_neutron_service
fi
if is_service_enabled q-agt; then
_configure_neutron_plugin_agent
fi
if is_service_enabled q-dhcp; then
_configure_neutron_dhcp_agent
fi
if is_service_enabled q-l3; then
_configure_neutron_l3_agent
fi
if is_service_enabled q-meta; then
_configure_neutron_metadata_agent
fi
if [[ "$Q_DVR_MODE" != "legacy" ]]; then
_configure_dvr
fi
if is_service_enabled ceilometer; then
_configure_neutron_ceilometer_notifications
fi
iniset $NEUTRON_CONF DEFAULT api_workers "$API_WORKERS"
# devstack is not a tool for running uber scale OpenStack
# clouds, therefore running without a dedicated RPC worker
# for state reports is more than adequate.
iniset $NEUTRON_CONF DEFAULT rpc_state_report_workers 0
}
function create_nova_conf_neutron {
iniset $NOVA_CONF DEFAULT use_neutron True
iniset $NOVA_CONF neutron auth_type "password"
iniset $NOVA_CONF neutron auth_url "$KEYSTONE_AUTH_URI"
iniset $NOVA_CONF neutron username "$Q_ADMIN_USERNAME"
iniset $NOVA_CONF neutron password "$SERVICE_PASSWORD"
iniset $NOVA_CONF neutron user_domain_name "$SERVICE_DOMAIN_NAME"
iniset $NOVA_CONF neutron project_name "$SERVICE_PROJECT_NAME"
iniset $NOVA_CONF neutron project_domain_name "$SERVICE_DOMAIN_NAME"
iniset $NOVA_CONF neutron auth_strategy "$Q_AUTH_STRATEGY"
iniset $NOVA_CONF neutron region_name "$REGION_NAME"
if [[ "$Q_USE_SECGROUP" == "True" ]]; then
LIBVIRT_FIREWALL_DRIVER=nova.virt.firewall.NoopFirewallDriver
iniset $NOVA_CONF DEFAULT firewall_driver $LIBVIRT_FIREWALL_DRIVER
fi
# optionally set options in nova_conf
neutron_plugin_create_nova_conf
if is_service_enabled q-meta; then
iniset $NOVA_CONF neutron service_metadata_proxy "True"
fi
iniset $NOVA_CONF DEFAULT vif_plugging_is_fatal "$VIF_PLUGGING_IS_FATAL"
iniset $NOVA_CONF DEFAULT vif_plugging_timeout "$VIF_PLUGGING_TIMEOUT"
}
# create_mutnauq_accounts() - Set up common required neutron accounts
# Tenant User Roles
# ------------------------------------------------------------------
# service neutron admin # if enabled
# Migrated from keystone_data.sh
function create_mutnauq_accounts {
if [[ "$ENABLED_SERVICES" =~ "q-svc" ]]; then
create_service_user "neutron"
get_or_create_service "neutron" "network" "Neutron Service"
get_or_create_endpoint \
"network" \
"$REGION_NAME" \
"$Q_PROTOCOL://$SERVICE_HOST:$Q_PORT/"
fi
}
# init_mutnauq() - Initialize databases, etc.
function init_mutnauq {
recreate_database $Q_DB_NAME
time_start "dbsync"
# Run Neutron db migrations
$NEUTRON_BIN_DIR/neutron-db-manage --config-file $NEUTRON_CONF --config-file /$Q_PLUGIN_CONF_FILE upgrade head
time_stop "dbsync"
}
# install_mutnauq() - Collect source and prepare
function install_mutnauq {
# Install neutron-lib from git so we make sure we're testing
# the latest code.
if use_library_from_git "neutron-lib"; then
git_clone_by_name "neutron-lib"
setup_dev_lib "neutron-lib"
fi
git_clone $NEUTRON_REPO $NEUTRON_DIR $NEUTRON_BRANCH
setup_develop $NEUTRON_DIR
}
# install_neutron_agent_packages() - Collect source and prepare
function install_neutron_agent_packages_mutnauq {
# radvd doesn't come with the OS. Install it if the l3 service is enabled.
if is_service_enabled q-l3; then
install_package radvd
fi
# install packages that are specific to plugin agent(s)
if is_service_enabled q-agt q-dhcp q-l3; then
neutron_plugin_install_agent_packages
fi
}
# Finish neutron configuration
function configure_neutron_after_post_config {
if [[ $Q_SERVICE_PLUGIN_CLASSES != '' ]]; then
iniset $NEUTRON_CONF DEFAULT service_plugins $Q_SERVICE_PLUGIN_CLASSES
fi
}
# Start running processes
function start_neutron_service_and_check {
local service_port=$Q_PORT
local service_protocol=$Q_PROTOCOL
local cfg_file_options
cfg_file_options="$(determine_config_files neutron-server)"
if is_service_enabled tls-proxy; then
service_port=$Q_PORT_INT
service_protocol="http"
fi
# Start the Neutron service
run_process q-svc "$NEUTRON_BIN_DIR/neutron-server $cfg_file_options"
echo "Waiting for Neutron to start..."
local testcmd="wget ${ssl_ca} --no-proxy -q -O- $service_protocol://$Q_HOST:$service_port"
test_with_retry "$testcmd" "Neutron did not start" $SERVICE_TIMEOUT
# Start proxy if enabled
if is_service_enabled tls-proxy; then
start_tls_proxy neutron '*' $Q_PORT $Q_HOST $Q_PORT_INT
fi
}
# Control of the l2 agent is separated out to make it easier to test partial
# upgrades (everything upgraded except the L2 agent)
function start_mutnauq_l2_agent {
run_process q-agt "$AGENT_BINARY --config-file $NEUTRON_CONF --config-file /$Q_PLUGIN_CONF_FILE"
if is_provider_network && [[ $Q_AGENT == "openvswitch" ]]; then
sudo ovs-vsctl --no-wait -- --may-exist add-port $OVS_PHYSICAL_BRIDGE $PUBLIC_INTERFACE
sudo ip link set $OVS_PHYSICAL_BRIDGE up
sudo ip link set br-int up
sudo ip link set $PUBLIC_INTERFACE up
if is_ironic_hardware; then
for IP in $(ip addr show dev $PUBLIC_INTERFACE | grep ' inet ' | awk '{print $2}'); do
sudo ip addr del $IP dev $PUBLIC_INTERFACE
sudo ip addr add $IP dev $OVS_PHYSICAL_BRIDGE
done
sudo ip route replace $FIXED_RANGE via $NETWORK_GATEWAY dev $OVS_PHYSICAL_BRIDGE
fi
fi
}
function start_mutnauq_other_agents {
run_process q-dhcp "$AGENT_DHCP_BINARY --config-file $NEUTRON_CONF --config-file $Q_DHCP_CONF_FILE"
if is_service_enabled neutron-vpnaas; then
: # Started by plugin
else
run_process q-l3 "$AGENT_L3_BINARY $(determine_config_files neutron-l3-agent)"
fi
run_process q-meta "$AGENT_META_BINARY --config-file $NEUTRON_CONF --config-file $Q_META_CONF_FILE"
run_process q-metering "$AGENT_METERING_BINARY --config-file $NEUTRON_CONF --config-file $METERING_AGENT_CONF_FILENAME"
}
# Start running processes, including screen
function start_neutron_agents {
# Start up the neutron agents if enabled
start_mutnauq_l2_agent
start_mutnauq_other_agents
}
function stop_mutnauq_l2_agent {
stop_process q-agt
}
# stop_mutnauq_other() - Stop running processes
function stop_mutnauq_other {
if is_service_enabled q-dhcp; then
stop_process q-dhcp
pid=$(ps aux | awk '/[d]nsmasq.+interface=(tap|ns-)/ { print $2 }')
[ ! -z "$pid" ] && sudo kill -9 $pid
fi
stop_process q-svc
if is_service_enabled q-l3; then
sudo pkill -f "radvd -C $DATA_DIR/neutron/ra"
stop_process q-l3
fi
if is_service_enabled q-meta; then
sudo pkill -9 -f neutron-ns-metadata-proxy || :
stop_process q-meta
fi
if is_service_enabled q-metering; then
neutron_metering_stop
fi
if [[ "$Q_USE_ROOTWRAP_DAEMON" == "True" ]]; then
sudo pkill -9 -f $NEUTRON_ROOTWRAP-daemon || :
fi
}
# stop_neutron() - Stop running processes (non-screen)
function stop_mutnauq {
stop_mutnauq_other
stop_mutnauq_l2_agent
}
# _move_neutron_addresses_route() - Move the primary IP to the OVS bridge
# on startup, or back to the public interface on cleanup. If no IP is
# configured on the interface, just add it as a port to the OVS bridge.
function _move_neutron_addresses_route {
local from_intf=$1
local to_intf=$2
local add_ovs_port=$3
local del_ovs_port=$4
local af=$5
if [[ -n "$from_intf" && -n "$to_intf" ]]; then
# Remove the primary IP address from $from_intf and add it to $to_intf,
# along with the default route, if it exists. Also, when called
# on configure we will also add $from_intf as a port on $to_intf,
# assuming it is an OVS bridge.
local IP_REPLACE=""
local IP_DEL=""
local IP_UP=""
local DEFAULT_ROUTE_GW
DEFAULT_ROUTE_GW=$(ip -f $af r | awk "/default.+$from_intf\s/ { print \$3; exit }")
local ADD_OVS_PORT=""
local DEL_OVS_PORT=""
local ARP_CMD=""
IP_BRD=$(ip -f $af a s dev $from_intf scope global primary | grep inet | awk '{ print $2, $3, $4; exit }')
if [ "$DEFAULT_ROUTE_GW" != "" ]; then
ADD_DEFAULT_ROUTE="sudo ip -f $af r replace default via $DEFAULT_ROUTE_GW dev $to_intf"
fi
if [[ "$add_ovs_port" == "True" ]]; then
ADD_OVS_PORT="sudo ovs-vsctl --may-exist add-port $to_intf $from_intf"
fi
if [[ "$del_ovs_port" == "True" ]]; then
DEL_OVS_PORT="sudo ovs-vsctl --if-exists del-port $from_intf $to_intf"
fi
if [[ "$IP_BRD" != "" ]]; then
IP_DEL="sudo ip addr del $IP_BRD dev $from_intf"
IP_REPLACE="sudo ip addr replace $IP_BRD dev $to_intf"
IP_UP="sudo ip link set $to_intf up"
if [[ "$af" == "inet" ]]; then
IP=$(echo $IP_BRD | awk '{ print $1; exit }' | grep -o -E '(.*)/' | cut -d "/" -f1)
ARP_CMD="arping -A -c 3 -w 4.5 -I $to_intf $IP "
fi
fi
# The add/del OVS port calls have to happen either before or
# after the address is moved in order to not leave it orphaned.
$DEL_OVS_PORT; $IP_DEL; $IP_REPLACE; $IP_UP; $ADD_OVS_PORT; $ADD_DEFAULT_ROUTE; $ARP_CMD
fi
}
# cleanup_mutnauq() - Remove residual data files, anything left over from previous
# runs that a clean run would need to clean up
function cleanup_mutnauq {
if [[ -n "$OVS_PHYSICAL_BRIDGE" ]]; then
_move_neutron_addresses_route "$OVS_PHYSICAL_BRIDGE" "$PUBLIC_INTERFACE" False True "inet"
if [[ $(ip -f inet6 a s dev "$OVS_PHYSICAL_BRIDGE" | grep -c 'global') != 0 ]]; then
# ip(8) wants the prefix length when deleting
local v6_gateway
v6_gateway=$(ip -6 a s dev $OVS_PHYSICAL_BRIDGE | grep $IPV6_PUBLIC_NETWORK_GATEWAY | awk '{ print $2 }')
sudo ip -6 addr del $v6_gateway dev $OVS_PHYSICAL_BRIDGE
_move_neutron_addresses_route "$OVS_PHYSICAL_BRIDGE" "$PUBLIC_INTERFACE" False False "inet6"
fi
if is_provider_network && is_ironic_hardware; then
for IP in $(ip addr show dev $OVS_PHYSICAL_BRIDGE | grep ' inet ' | awk '{print $2}'); do
sudo ip addr del $IP dev $OVS_PHYSICAL_BRIDGE
sudo ip addr add $IP dev $PUBLIC_INTERFACE
done
sudo route del -net $FIXED_RANGE gw $NETWORK_GATEWAY dev $OVS_PHYSICAL_BRIDGE
fi
fi
if is_neutron_ovs_base_plugin; then
neutron_ovs_base_cleanup
fi
if [[ $Q_AGENT == "linuxbridge" ]]; then
neutron_lb_cleanup
fi
# delete all namespaces created by neutron
for ns in $(sudo ip netns list | grep -o -E '(qdhcp|qrouter|fip|snat)-[0-9a-f-]*'); do
sudo ip netns delete ${ns}
done
}
function _create_neutron_conf_dir {
# Put config files in ``NEUTRON_CONF_DIR`` for everyone to find
sudo install -d -o $STACK_USER $NEUTRON_CONF_DIR
}
# _configure_neutron_common()
# Set common config for all neutron server and agents.
# This MUST be called before other ``_configure_neutron_*`` functions.
function _configure_neutron_common {
_create_neutron_conf_dir
# Uses oslo config generator to generate core sample configuration files
(cd $NEUTRON_DIR && exec ./tools/generate_config_file_samples.sh)
cp $NEUTRON_DIR/etc/neutron.conf.sample $NEUTRON_CONF
Q_POLICY_FILE=$NEUTRON_CONF_DIR/policy.json
cp $NEUTRON_DIR/etc/policy.json $Q_POLICY_FILE
# allow neutron user to administer neutron to match neutron account
sed -i 's/"context_is_admin": "role:admin"/"context_is_admin": "role:admin or user_name:neutron"/g' $Q_POLICY_FILE
# Set plugin-specific variables ``Q_DB_NAME``, ``Q_PLUGIN_CLASS``.
# For main plugin config file, set ``Q_PLUGIN_CONF_PATH``, ``Q_PLUGIN_CONF_FILENAME``.
neutron_plugin_configure_common
if [[ "$Q_PLUGIN_CONF_PATH" == '' || "$Q_PLUGIN_CONF_FILENAME" == '' || "$Q_PLUGIN_CLASS" == '' ]]; then
die $LINENO "Neutron plugin not set.. exiting"
fi
# If needed, move config file from ``$NEUTRON_DIR/etc/neutron`` to ``NEUTRON_CONF_DIR``
mkdir -p /$Q_PLUGIN_CONF_PATH
Q_PLUGIN_CONF_FILE=$Q_PLUGIN_CONF_PATH/$Q_PLUGIN_CONF_FILENAME
# NOTE(hichihara): Some neutron vendor plugins were already decomposed and
# there is no config file in Neutron tree. They should prepare the file in each plugin.
if [ -f "$NEUTRON_DIR/$Q_PLUGIN_CONF_FILE.sample" ]; then
cp "$NEUTRON_DIR/$Q_PLUGIN_CONF_FILE.sample" /$Q_PLUGIN_CONF_FILE
elif [ -f $NEUTRON_DIR/$Q_PLUGIN_CONF_FILE ]; then
cp $NEUTRON_DIR/$Q_PLUGIN_CONF_FILE /$Q_PLUGIN_CONF_FILE
fi
iniset $NEUTRON_CONF database connection `database_connection_url $Q_DB_NAME`
iniset $NEUTRON_CONF DEFAULT state_path $DATA_DIR/neutron
iniset $NEUTRON_CONF DEFAULT use_syslog $SYSLOG
iniset $NEUTRON_CONF DEFAULT bind_host $Q_LISTEN_ADDRESS
iniset $NEUTRON_CONF oslo_concurrency lock_path $DATA_DIR/neutron/lock
# NOTE(freerunner): Need to adjust Region Name for nova in multiregion installation
iniset $NEUTRON_CONF nova region_name $REGION_NAME
if [ "$VIRT_DRIVER" = 'fake' ]; then
# Disable arbitrary limits
iniset $NEUTRON_CONF quotas quota_network -1
iniset $NEUTRON_CONF quotas quota_subnet -1
iniset $NEUTRON_CONF quotas quota_port -1
iniset $NEUTRON_CONF quotas quota_security_group -1
iniset $NEUTRON_CONF quotas quota_security_group_rule -1
fi
# Format logging
setup_logging $NEUTRON_CONF
if is_service_enabled tls-proxy; then
# Set the service port for a proxy to take the original
iniset $NEUTRON_CONF DEFAULT bind_port "$Q_PORT_INT"
iniset $NEUTRON_CONF oslo_middleware enable_proxy_headers_parsing True
fi
_neutron_setup_rootwrap
}
function _configure_neutron_dhcp_agent {
cp $NEUTRON_DIR/etc/dhcp_agent.ini.sample $Q_DHCP_CONF_FILE
iniset $Q_DHCP_CONF_FILE DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL
# make it so we have working DNS from guests
iniset $Q_DHCP_CONF_FILE DEFAULT dnsmasq_local_resolv True
iniset $Q_DHCP_CONF_FILE AGENT root_helper "$Q_RR_COMMAND"
if [[ "$Q_USE_ROOTWRAP_DAEMON" == "True" ]]; then
iniset $Q_DHCP_CONF_FILE AGENT root_helper_daemon "$Q_RR_DAEMON_COMMAND"
fi
if ! is_service_enabled q-l3; then
if [[ "$ENABLE_ISOLATED_METADATA" = "True" ]]; then
iniset $Q_DHCP_CONF_FILE DEFAULT enable_isolated_metadata $ENABLE_ISOLATED_METADATA
iniset $Q_DHCP_CONF_FILE DEFAULT enable_metadata_network $ENABLE_METADATA_NETWORK
else
if [[ "$ENABLE_METADATA_NETWORK" = "True" ]]; then
die "$LINENO" "Enable isolated metadata is a must for metadata network"
fi
fi
fi
_neutron_setup_interface_driver $Q_DHCP_CONF_FILE
neutron_plugin_configure_dhcp_agent $Q_DHCP_CONF_FILE
}
function _configure_neutron_metadata_agent {
cp $NEUTRON_DIR/etc/metadata_agent.ini.sample $Q_META_CONF_FILE
iniset $Q_META_CONF_FILE DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL
iniset $Q_META_CONF_FILE DEFAULT nova_metadata_host $Q_META_DATA_IP
iniset $Q_META_CONF_FILE DEFAULT metadata_workers $API_WORKERS
iniset $Q_META_CONF_FILE AGENT root_helper "$Q_RR_COMMAND"
if [[ "$Q_USE_ROOTWRAP_DAEMON" == "True" ]]; then
iniset $Q_META_CONF_FILE AGENT root_helper_daemon "$Q_RR_DAEMON_COMMAND"
fi
}
function _configure_neutron_ceilometer_notifications {
iniset $NEUTRON_CONF oslo_messaging_notifications driver messagingv2
}
function _configure_neutron_metering {
neutron_agent_metering_configure_common
neutron_agent_metering_configure_agent
}
function _configure_dvr {
iniset $NEUTRON_CONF DEFAULT router_distributed True
iniset $Q_L3_CONF_FILE DEFAULT agent_mode $Q_DVR_MODE
}
# _configure_neutron_plugin_agent() - Set config files for neutron plugin agent
# It is called when q-agt is enabled.
function _configure_neutron_plugin_agent {
# Specify the default root helper prior to agent configuration to
# ensure that an agent's configuration can override the default
iniset /$Q_PLUGIN_CONF_FILE agent root_helper "$Q_RR_COMMAND"
if [[ "$Q_USE_ROOTWRAP_DAEMON" == "True" ]]; then
iniset /$Q_PLUGIN_CONF_FILE agent root_helper_daemon "$Q_RR_DAEMON_COMMAND"
fi
iniset $NEUTRON_CONF DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL
# Configure agent for plugin
neutron_plugin_configure_plugin_agent
}
# _configure_neutron_service() - Set config files for neutron service
# It is called when q-svc is enabled.
function _configure_neutron_service {
Q_API_PASTE_FILE=$NEUTRON_CONF_DIR/api-paste.ini
cp $NEUTRON_DIR/etc/api-paste.ini $Q_API_PASTE_FILE
# Update either configuration file with plugin
iniset $NEUTRON_CONF DEFAULT core_plugin $Q_PLUGIN_CLASS
iniset $NEUTRON_CONF DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL
iniset $NEUTRON_CONF oslo_policy policy_file $Q_POLICY_FILE
iniset $NEUTRON_CONF DEFAULT allow_overlapping_ips $Q_ALLOW_OVERLAPPING_IP
iniset $NEUTRON_CONF DEFAULT auth_strategy $Q_AUTH_STRATEGY
_neutron_setup_keystone $NEUTRON_CONF keystone_authtoken
# Configuration for neutron notifications to nova.
iniset $NEUTRON_CONF DEFAULT notify_nova_on_port_status_changes $Q_NOTIFY_NOVA_PORT_STATUS_CHANGES
iniset $NEUTRON_CONF DEFAULT notify_nova_on_port_data_changes $Q_NOTIFY_NOVA_PORT_DATA_CHANGES
configure_auth_token_middleware $NEUTRON_CONF nova $NEUTRON_AUTH_CACHE_DIR nova
# Configure plugin
neutron_plugin_configure_service
}
# Utility Functions
#------------------
# _neutron_service_plugin_class_add() - add service plugin class
function _neutron_service_plugin_class_add {
local service_plugin_class=$1
if [[ $Q_SERVICE_PLUGIN_CLASSES == '' ]]; then
Q_SERVICE_PLUGIN_CLASSES=$service_plugin_class
elif [[ ! ,${Q_SERVICE_PLUGIN_CLASSES}, =~ ,${service_plugin_class}, ]]; then
Q_SERVICE_PLUGIN_CLASSES="$Q_SERVICE_PLUGIN_CLASSES,$service_plugin_class"
fi
}
# _neutron_ml2_extension_driver_add_old() - add ML2 extension driver
function _neutron_ml2_extension_driver_add_old {
local extension=$1
if [[ $Q_ML2_PLUGIN_EXT_DRIVERS == '' ]]; then
Q_ML2_PLUGIN_EXT_DRIVERS=$extension
elif [[ ! ,${Q_ML2_PLUGIN_EXT_DRIVERS}, =~ ,${extension}, ]]; then
Q_ML2_PLUGIN_EXT_DRIVERS="$Q_ML2_PLUGIN_EXT_DRIVERS,$extension"
fi
}
# mutnauq_server_config_add() - add server config file
function mutnauq_server_config_add {
_Q_PLUGIN_EXTRA_CONF_FILES_ABS+=($1)
}
# _neutron_deploy_rootwrap_filters() - deploy rootwrap filters to $Q_CONF_ROOTWRAP_D (owned by root).
function _neutron_deploy_rootwrap_filters {
if [[ "$Q_USE_ROOTWRAP" == "False" ]]; then
return
fi
local srcdir=$1
sudo install -d -o root -m 755 $Q_CONF_ROOTWRAP_D
sudo install -o root -m 644 $srcdir/etc/neutron/rootwrap.d/* $Q_CONF_ROOTWRAP_D/
}
# _neutron_setup_rootwrap() - configure Neutron's rootwrap
function _neutron_setup_rootwrap {
if [[ "$Q_USE_ROOTWRAP" == "False" ]]; then
return
fi
# Wipe any existing ``rootwrap.d`` files first
Q_CONF_ROOTWRAP_D=$NEUTRON_CONF_DIR/rootwrap.d
if [[ -d $Q_CONF_ROOTWRAP_D ]]; then
sudo rm -rf $Q_CONF_ROOTWRAP_D
fi
_neutron_deploy_rootwrap_filters $NEUTRON_DIR
# Set up ``rootwrap.conf``, pointing to ``$NEUTRON_CONF_DIR/rootwrap.d``
# location moved in newer versions, prefer new location
if test -r $NEUTRON_DIR/etc/neutron/rootwrap.conf; then
sudo install -o root -g root -m 644 $NEUTRON_DIR/etc/neutron/rootwrap.conf $Q_RR_CONF_FILE
else
sudo install -o root -g root -m 644 $NEUTRON_DIR/etc/rootwrap.conf $Q_RR_CONF_FILE
fi
sudo sed -e "s:^filters_path=.*$:filters_path=$Q_CONF_ROOTWRAP_D:" -i $Q_RR_CONF_FILE
sudo sed -e 's:^exec_dirs=\(.*\)$:exec_dirs=\1,/usr/local/bin:' -i $Q_RR_CONF_FILE
# Specify ``rootwrap.conf`` as first parameter to neutron-rootwrap
ROOTWRAP_SUDOER_CMD="$NEUTRON_ROOTWRAP $Q_RR_CONF_FILE *"
ROOTWRAP_DAEMON_SUDOER_CMD="$NEUTRON_ROOTWRAP-daemon $Q_RR_CONF_FILE"
# Set up the rootwrap sudoers for neutron
TEMPFILE=`mktemp`
echo "$STACK_USER ALL=(root) NOPASSWD: $ROOTWRAP_SUDOER_CMD" >$TEMPFILE
echo "$STACK_USER ALL=(root) NOPASSWD: $ROOTWRAP_DAEMON_SUDOER_CMD" >>$TEMPFILE
chmod 0440 $TEMPFILE
sudo chown root:root $TEMPFILE
sudo mv $TEMPFILE /etc/sudoers.d/neutron-rootwrap
# Update the root_helper
iniset $NEUTRON_CONF agent root_helper "$Q_RR_COMMAND"
if [[ "$Q_USE_ROOTWRAP_DAEMON" == "True" ]]; then
iniset $NEUTRON_CONF agent root_helper_daemon "$Q_RR_DAEMON_COMMAND"
fi
}
# Configures keystone integration for neutron service
function _neutron_setup_keystone {
local conf_file=$1
local section=$2
create_neutron_cache_dir
configure_auth_token_middleware $conf_file $Q_ADMIN_USERNAME $NEUTRON_AUTH_CACHE_DIR $section
}
function _neutron_setup_interface_driver {
# ovs_use_veth needs to be set before the plugin configuration
# occurs to allow plugins to override the setting.
iniset $1 DEFAULT ovs_use_veth $Q_OVS_USE_VETH
neutron_plugin_setup_interface_driver $1
}
# Functions for Neutron Exercises
#--------------------------------
function delete_probe {
local from_net="$1"
net_id=`_get_net_id $from_net`
probe_id=`neutron-debug --os-tenant-name admin --os-username admin --os-password $ADMIN_PASSWORD probe-list -c id -c network_id | grep $net_id | awk '{print $2}'`
neutron-debug --os-tenant-name admin --os-username admin probe-delete $probe_id
}
function _get_net_id {
openstack --os-cloud devstack-admin --os-region-name="$REGION_NAME" --os-project-name admin --os-username admin --os-password $ADMIN_PASSWORD network list | grep $1 | awk '{print $2}'
}
function _get_probe_cmd_prefix {
local from_net="$1"
net_id=`_get_net_id $from_net`
probe_id=`neutron-debug --os-tenant-name admin --os-username admin --os-password $ADMIN_PASSWORD probe-list -c id -c network_id | grep $net_id | awk '{print $2}' | head -n 1`
echo "$Q_RR_COMMAND ip netns exec qprobe-$probe_id"
}
# ssh check
function _ssh_check_neutron {
local from_net=$1
local key_file=$2
local ip=$3
local user=$4
local timeout_sec=$5
local probe_cmd = ""
probe_cmd=`_get_probe_cmd_prefix $from_net`
local testcmd="$probe_cmd ssh -o StrictHostKeyChecking=no -i $key_file ${user}@$ip echo success"
test_with_retry "$testcmd" "server $ip didn't become ssh-able" $timeout_sec
}
# Restore xtrace
$_XTRACE_NEUTRON
# Tell emacs to use shell-script-mode
## Local variables:
## mode: shell-script
## End: