Manila install guide: Fix wrong instructions

Previously only the DHSS=True mode was documented
in post install steps. The assumption that the generic driver
was being configured existed in other places as well.

* add DHSS=False documentation as necessary with the
   LVM driver.
* correct assumptions in other places to clarify usage
   of appropriate share driver modes.

Change-Id: Ic1356453e510e8f360269fb45a41379329ce68c2
Closes-Bug: #1616257
This commit is contained in:
Goutham Pacha Ravi 2016-08-23 20:22:36 -04:00 committed by Goutham Pacha Ravi
parent 5a62e65c2d
commit bc4712e35e
13 changed files with 576 additions and 241 deletions

View File

@ -29,6 +29,17 @@
rootwrap_config = /etc/manila/rootwrap.conf
api_paste_config = /etc/manila/api-paste.ini
.. important::
The ``default_share_type`` option specifies the default share type to
be used when shares are created without specifying the share type in
the request. The default share type that is specified in the
configuration file has to be created with the necessary required
extra-specs (such as ``driver_handles_share_servers``) set
appropriately with reference to the driver mode used. This is further
explained in the section discussing the setup and configuration of the
share node.
* In the ``[DEFAULT]`` and ``[keystone_authtoken]`` sections, configure
Identity service access:

View File

@ -61,15 +61,15 @@ Configure components
#. Edit the ``/etc/manila/manila.conf`` file and complete the following
actions:
* In the ``[DEFAULT]`` section, enable the LVM driver and the NFS/CIFS
protocols:
* In the ``[DEFAULT]`` section, enable the LVM driver and the NFS
protocol:
.. code-block:: ini
[DEFAULT]
...
enabled_share_backends = lvm
enabled_share_protocols = NFS,CIFS
enabled_share_protocols = NFS
.. note::

View File

@ -1,5 +1,6 @@
Shared File Systems Option 1: No driver support for share servers management
----------------------------------------------------------------------------
For simplicity, this configuration references the same storage node
configuration for the Block Storage service. However, the LVM driver
requires a separate empty local block storage device to avoid conflict

View File

@ -0,0 +1,176 @@
Creating shares with Shared File Systems Option 1 (DHSS = False)
----------------------------------------------------------------
Create a share type
-------------------
Disable DHSS (``driver_handles_share_servers``) before creating a share using
the LVM driver.
#. Source the admin credentials to gain access to admin-only CLI commands:
.. code-block:: console
$ . admin-openrc
#. Create a default share type with DHSS disabled. A default share type will
allow you to create shares with this driver, without having to specify
the share type explicitly during share creation.
.. code-block:: console
$ manila type-create default_share_type False
+----------------------+--------------------------------------+
| Property | Value |
+----------------------+--------------------------------------+
| required_extra_specs | driver_handles_share_servers : False |
| Name | default_share_type |
| Visibility | public |
| is_default | - |
| ID | 3df065c8-6ca4-4b80-a5cb-e633c0439097 |
| optional_extra_specs | snapshot_support : True |
+----------------------+--------------------------------------+
Set this default share type in ``manila.conf`` under the ``[DEFAULT]``
section and restart the ``manila-api`` service before proceeding.
Unless you do so, the default share type will not be effective.
.. note::
Creating and configuring a default share type is optional. If you wish
to use the shared file system service with a variety of share types,
where each share creation request could specify a type, please refer to
the Share types usage documentation `here
<http://docs.openstack.org/admin-guide/shared-file-systems-share-types.html>_`.
Create a share
--------------
#. Source the ``demo`` credentials to perform
the following steps as a non-administrative project:
.. code-block:: console
$ . demo-openrc
#. Create an NFS share. Since a default share type has been created and
configured, it need not be specified in the request.
.. code-block:: console
$ manila create NFS 1 --name share1
+-----------------------------+--------------------------------------+
| Property | Value |
+-----------------------------+--------------------------------------+
| status | creating |
| share_type_name | default_share_type |
| description | None |
| availability_zone | None |
| share_network_id | None |
| host | |
| access_rules_status | active |
| snapshot_id | None |
| is_public | False |
| task_state | None |
| snapshot_support | True |
| id | 55c401b3-3112-4294-aa9f-3cc355a4e361 |
| size | 1 |
| name | share1 |
| share_type | 3df065c8-6ca4-4b80-a5cb-e633c0439097 |
| has_replicas | False |
| replication_type | None |
| created_at | 2016-03-30T19:10:33.000000 |
| share_proto | NFS |
| consistency_group_id | None |
| source_cgsnapshot_member_id | None |
| project_id | 3a46a53a377642a284e1d12efabb3b5a |
| metadata | {} |
+-----------------------------+--------------------------------------+
#. After some time, the share status should change from ``creating``
to ``available``:
.. code-block:: console
$ manila list
+--------------------------------------+--------+------+-------------+-----------+-----------+--------------------+-----------------------------+-------------------+
| ID | Name | Size | Share Proto | Status | Is Public | Share Type Name | Host | Availability Zone |
+--------------------------------------+--------+------+-------------+-----------+-----------+--------------------+-----------------------------+-------------------+
| 55c401b3-3112-4294-aa9f-3cc355a4e361 | share1 | 1 | NFS | available | False | default_share_type | storage@lvm#lvm-single-pool | nova |
+--------------------------------------+--------+------+-------------+-----------+-----------+--------------------+-----------------------------+-------------------+
#. Determine export IP address of the share:
.. code-block:: console
$ manila show share1
+-----------------------------+------------------------------------------------------------------------------------+
| Property | Value |
+-----------------------------+------------------------------------------------------------------------------------+
| status | available |
| share_type_name | default_share_type |
| description | None |
| availability_zone | nova |
| share_network_id | None |
| export_locations | |
| | path = 10.0.0.41:/var/lib/manila/mnt/share-8e13a98f-c310-41df-ac90-fc8bce4910b8 |
| | id = 3c8d0ada-cadf-48dd-85b8-d4e8c3b1e204 |
| | preferred = False |
| host | storage@lvm#lvm-single-pool |
| access_rules_status | active |
| snapshot_id | None |
| is_public | False |
| task_state | None |
| snapshot_support | True |
| id | 55c401b3-3112-4294-aa9f-3cc355a4e361 |
| size | 1 |
| name | share1 |
| share_type | c6dfcfc6-9920-420e-8b0a-283d578efef5 |
| has_replicas | False |
| replication_type | None |
| created_at | 2016-03-30T19:10:33.000000 |
| share_proto | NFS |
| consistency_group_id | None |
| source_cgsnapshot_member_id | None |
| project_id | 3a46a53a377642a284e1d12efabb3b5a |
| metadata | {} |
+-----------------------------+------------------------------------------------------------------------------------+
Allow access to the share
-------------------------
#. Configure access to the new share before attempting to mount it via
the network. The compute instance (whose IP address is referenced by the
INSTANCE_IP below) must have network connectivity to the network specified
in the share network.
.. code-block:: console
$ manila access-allow share1 ip INSTANCE_IP
+--------------+--------------------------------------+
| Property | Value |
+--------------+--------------------------------------+
| share_id | 55c401b3-3112-4294-aa9f-3cc355a4e361 |
| access_type | ip |
| access_to | 10.0.0.46 |
| access_level | rw |
| state | new |
| id | f88eab01-7197-44bf-ad0f-d6ca6f99fc96 |
+--------------+--------------------------------------+
Mount the share on a compute instance
-------------------------------------
#. Log into your compute instance and create a folder where the mount will
be placed:
.. code-block:: console
$ mkdir ~/test_folder
#. Mount the NFS share in the compute instance using the export location of
the share:
.. code-block:: console
# mount -vt nfs 10.0.0.41:/var/lib/manila/mnt/share-8e13a98f-c310-41df-ac90-fc8bce4910b8 ~/test_folder

View File

@ -4,15 +4,15 @@ Configure components
#. Edit the ``/etc/manila/manila.conf`` file and complete the following
actions:
* In the ``[DEFAULT]`` section, enable the generic driver and the NFS/CIFS
protocols:
* In the ``[DEFAULT]`` section, enable the generic driver and the NFS
protocol:
.. code-block:: ini
[DEFAULT]
...
enabled_share_backends = generic
enabled_share_protocols = NFS,CIFS
enabled_share_protocols = NFS
.. note::
@ -82,3 +82,13 @@ Configure components
You can also use SSH keys instead of password authentication for
service instance credentials.
.. important::
The ``service_image_name``, ``service_instance_flavor_id``,
``service_instance_user`` and ``service_instance_password`` are with
reference to the service image that is used by the driver to create
share servers. A sample service image for use with the ``generic``
driver is available in the ``manila-image-elements`` project. Its
creation is explained in the post installation steps (See:
:ref:`post-install`).

View File

@ -2,14 +2,16 @@ Shared File Systems Option 2: Driver support for share servers management
-------------------------------------------------------------------------
For simplicity, this configuration references the same storage node
configuration for the Block Storage service.
as the one used for the Block Storage service.
.. note::
This guide describes how to configure the Shared File Systems service to
use the ``generic`` driver with the driver handles share server mode
(DHSS) enabled. This mode requires Compute (nova), Networking (neutron) and
Block storage (cinder) services for managing share servers. The information
used for creating share servers is configured as share networks. Generic
driver with DHSS enabled also requires network to be attached to a public
router.
(DHSS) enabled. This driver requires Compute service (nova), Image service
(glance) and Networking service (neutron) for creating and managing share
servers; and Block storage service (cinder) for creating shares. The
information used for creating share servers is configured as share
networks. Generic driver with DHSS enabled also requires the tenant's
private network (where the compute instances are running) to be attached
to a public router.

View File

@ -0,0 +1,269 @@
Creating shares with Shared File Systems Option 2 (DHSS = True)
---------------------------------------------------------------
Before being able to create a share, manila with the generic driver and
the DHSS (``driver_handles_share_servers``) mode enabled requires the
definition of at least an image, a network and a share-network for being
used to create a share server. For that `back end` configuration, the share
server is an instance where NFS shares are served.
.. note::
This configuration automatically creates a cinder volume for every share.
The cinder volumes are attached to share servers according to the
definition of a share network.
#. Source the admin credentials to gain access to admin-only CLI commands:
.. code-block:: console
$ . admin-openrc.sh
#. Create a default share type with DHSS enabled. A default share type will
allow you to create shares with this driver, without having to specify
the share type explicitly during share creation.
.. code-block:: console
$ manila type-create default_share_type True
+----------------------+--------------------------------------+
| Property | Value |
+----------------------+--------------------------------------+
| required_extra_specs | driver_handles_share_servers : True |
| Name | default_share_type |
| Visibility | public |
| is_default | - |
| ID | 8a35da28-0f74-490d-afff-23664ecd4f01 |
| optional_extra_specs | snapshot_support : True |
+----------------------+--------------------------------------+
Set this default share type in ``manila.conf`` under the ``[DEFAULT]``
section and restart the ``manila-api`` service before proceeding.
Unless you do so, the default share type will not be effective.
.. note::
Creating and configuring a default share type is optional. If you wish
to use the shared file system service with a variety of share types,
where each share creation request could specify a type, please refer to
the Share types usage documentation `here
<http://docs.openstack.org/admin-guide/shared-file-systems-share-types.html>_`.
#. Create a manila share server image in the Image service. You may skip this
step and use any existing image. However, for mounting a share, the service
image must contain the NFS packages as appropriate for the operating system.
Whatever image you choose to be the service image, be sure to set the
configuration values ``service_image_name``, ``service_instance_flavor_id``,
``service_instance_user`` and ``service_instance_password`` in
``manila.conf``.
.. note::
Any changes made to ``manila.conf`` while the ``manila-share`` service
is running will require a restart of the service to be effective.
.. note::
As an alternative to specifying a plain-text
``service_instance_password`` in your configuration, a key-pair may be
specified with options ``path_to_public_key`` and
``path_to_private_key`` to configure and allow password-less SSH access
between the `share node` and the share server/s created.
.. code-block:: console
$ glance image-create \
--copy-from http://tarballs.openstack.org/manila-image-elements/images/manila-service-image-master.qcow2 \
--name "manila-service-image" \
--disk-format qcow2 \
--container-format bare \
--visibility public --progress
[=============================>] 100%
+------------------+--------------------------------------+
| Property | Value |
+------------------+--------------------------------------+
| checksum | 48a08e746cf0986e2bc32040a9183445 |
| container_format | bare |
| created_at | 2016-01-26T19:52:24Z |
| disk_format | qcow2 |
| id | 1fc7f29e-8fe6-44ef-9c3c-15217e83997c |
| min_disk | 0 |
| min_ram | 0 |
| name | manila-service-image |
| owner | e2c965830ecc4162a002bf16ddc91ab7 |
| protected | False |
| size | 306577408 |
| status | active |
| tags | [] |
| updated_at | 2016-01-26T19:52:28Z |
| virtual_size | None |
| visibility | public |
+------------------+--------------------------------------+
#. List available networks in order to get id and subnets of the private
network:
.. code-block:: console
$ neutron net-list
+--------------------------------------+---------+----------------------------------------------------+
| id | name | subnets |
+--------------------------------------+---------+----------------------------------------------------+
| 0e62efcd-8cee-46c7-b163-d8df05c3c5ad | public | 5cc70da8-4ee7-4565-be53-b9c011fca011 10.3.31.0/24 |
| 7c6f9b37-76b4-463e-98d8-27e5686ed083 | private | 3482f524-8bff-4871-80d4-5774c2730728 172.16.1.0/24 |
+--------------------------------------+---------+----------------------------------------------------+
#. Source the ``demo`` credentials to perform
the following steps as a non-administrative project:
.. code-block:: console
$ . demo-openrc.sh
.. code-block:: console
$ manila share-network-create --name demo-share-network1 \
--neutron-net-id PRIVATE_NETWORK_ID \
--neutron-subnet-id PRIVATE_NETWORK_SUBNET_ID
+-------------------+--------------------------------------+
| Property | Value |
+-------------------+--------------------------------------+
| name | demo-share-network1 |
| segmentation_id | None |
| created_at | 2016-01-26T20:03:41.877838 |
| neutron_subnet_id | 3482f524-8bff-4871-80d4-5774c2730728 |
| updated_at | None |
| network_type | None |
| neutron_net_id | 7c6f9b37-76b4-463e-98d8-27e5686ed083 |
| ip_version | None |
| nova_net_id | None |
| cidr | None |
| project_id | e2c965830ecc4162a002bf16ddc91ab7 |
| id | 58b2f0e6-5509-4830-af9c-97f525a31b14 |
| description | None |
+-------------------+--------------------------------------+
Create a share
--------------
#. Create an NFS share using the share network. Since a default share type has
been created and configured, it need not be specified in the request.
.. code-block:: console
$ manila create NFS 1 --name demo-share1 --share-network demo-share-network1
+-----------------------------+--------------------------------------+
| Property | Value |
+-----------------------------+--------------------------------------+
| status | None |
| share_type_name | default_share_type |
| description | None |
| availability_zone | None |
| share_network_id | 58b2f0e6-5509-4830-af9c-97f525a31b14 |
| host | None |
| snapshot_id | None |
| is_public | False |
| task_state | None |
| snapshot_support | True |
| id | 016ca18f-bdd5-48e1-88c0-782e4c1aa28c |
| size | 1 |
| name | demo-share1 |
| share_type | 8a35da28-0f74-490d-afff-23664ecd4f01 |
| created_at | 2016-01-26T20:08:50.502877 |
| export_location | None |
| share_proto | NFS |
| consistency_group_id | None |
| source_cgsnapshot_member_id | None |
| project_id | 48e8c35b2ac6495d86d4be61658975e7 |
| metadata | {} |
+-----------------------------+--------------------------------------+
#. After some time, the share status should change from ``creating``
to ``available``:
.. code-block:: console
$ manila list
+--------------------------------------+-------------+------+-------------+-----------+-----------+------------------------+-----------------------------+-------------------+
| ID | Name | Size | Share Proto | Status | Is Public | Share Type Name | Host | Availability Zone |
+--------------------------------------+-------------+------+-------------+-----------+-----------+------------------------+-----------------------------+-------------------+
| 5f8a0574-a95e-40ff-b898-09fd8d6a1fac | demo-share1 | 1 | NFS | available | False | default_share_type | storagenode@generic#GENERIC | nova |
+--------------------------------------+-------------+------+-------------+-----------+-----------+------------------------+-----------------------------+-------------------+
#. Determine export IP address of the share:
.. code-block:: console
$ manila show demo-share1
+-----------------------------+------------------------------------------------------------------------------------+
| Property | Value |
+-----------------------------+------------------------------------------------------------------------------------+
| status | available |
| share_type_name | default_share_type |
| description | None |
| availability_zone | nova |
| share_network_id | 58b2f0e6-5509-4830-af9c-97f525a31b14 |
| export_locations | |
| | path = 10.254.0.6:/shares/share-0bfd69a1-27f0-4ef5-af17-7cd50bce6550 |
| | id = e525cbca-b3cc-4adf-a1cb-b1bf48fa2422 |
| | preferred = False |
| host | storagenode@generic#GENERIC |
| access_rules_status | active |
| snapshot_id | None |
| is_public | False |
| task_state | None |
| snapshot_support | True |
| id | 5f8a0574-a95e-40ff-b898-09fd8d6a1fac |
| size | 1 |
| name | demo-share1 |
| share_type | 8a35da28-0f74-490d-afff-23664ecd4f01 |
| has_replicas | False |
| replication_type | None |
| created_at | 2016-03-30T19:10:33.000000 |
| share_proto | NFS |
| consistency_group_id | None |
| source_cgsnapshot_member_id | None |
| project_id | 48e8c35b2ac6495d86d4be61658975e7 |
| metadata | {} |
+-----------------------------+------------------------------------------------------------------------------------+
Allow access to the share
-------------------------
#. Configure access to the new share before attempting to mount it via
the network. The compute instance (whose IP address is referenced by the
INSTANCE_IP below) must have network connectivity to the network specified
in the share network.
.. code-block:: console
$ manila access-allow demo-share1 ip INSTANCE_IP
+--------------+--------------------------------------+
| Property | Value |
+--------------+--------------------------------------+
| share_id | 5f8a0574-a95e-40ff-b898-09fd8d6a1fac |
| access_type | ip |
| access_to | 10.0.0.46 |
| access_level | rw |
| state | new |
| id | aefeab01-7197-44bf-ad0f-d6ca6f99fc96 |
+--------------+--------------------------------------+
Mount the share on a compute instance
-------------------------------------
#. Log into your compute instance and create a folder where the mount will
be placed:
.. code-block:: console
$ mkdir ~/test_folder
#. Mount the NFS share in the compute instance using the export location of
the share:
.. code-block:: console
$ mount -vt nfs 10.254.0.6:/shares/share-0bfd69a1-27f0-4ef5-af17-7cd50bce6550 ~/test_folder

View File

@ -27,6 +27,16 @@
default_share_type = default_share_type
rootwrap_config = /etc/manila/rootwrap.conf
.. important::
The ``default_share_type`` option specifies the default share type to
be used when shares are created without specifying the share type in
the request. The default share type that is specified in the
configuration file has to be created with the necessary required
extra-specs (such as ``driver_handles_share_servers``) set
appropriately with reference to the driver mode used. This is
explained in further steps.
* In the ``[DEFAULT]`` and ``[keystone_authtoken]`` sections, configure
Identity service access:

View File

@ -5,25 +5,31 @@ Option 1
--------
Deploying the service without driver support for share management.
In this mode, the service does not do anything related to networking. The
operator must ensure network connectivity between instances and the NFS
server. This tutorial demonstrates setting up the LVM driver to support this
driver mode. It requires LVM and NFS packages as well as an additional disk
for the ``manila-share`` LVM volume group. This driver
mode may be referred to as ``driver_handles_share_servers = False`` mode, or
simply ``DHSS=False`` mode.
operator must ensure network connectivity between instances and the NAS
protocol based server.
This tutorial demonstrates setting up the LVM driver which creates LVM volumes
on the share node and exports them with the help of an NFS server that is
installed locally on the share node. It therefore requires LVM and NFS packages
as well as an additional disk for the ``manila-share`` LVM volume group.
This driver mode may be referred to as ``driver_handles_share_servers = False``
mode, or simply ``DHSS=False`` mode.
Option 2
--------
Deploying the service with driver support for share management. In
this mode, the service runs with a back end driver that creates and manages
share servers. This tutorial demonstrates setting up the Generic driver.
This driver requires Compute (nova), Networking (neutron) and Block
storage (cinder) services for managing share servers. The information used for
creating share servers is configured with the help of share networks. This
option uses the generic driver with the handling of share servers capacity
and requires attaching the ``selfservice`` network to a router. This driver
mode may be referred to as ``driver_handles_share_servers = True`` mode, or
simply ``DHSS=True`` mode.
share servers. This tutorial demonstrates setting up the ``Generic`` driver.
This driver requires Compute service (nova), Image service (glance) and
Networking service (neutron) for creating and managing share servers; and
Block storage service (cinder) for creating shares.
The information used for creating share servers is configured with the help of
share networks.
This driver mode may be referred to as ``driver_handles_share_servers = True``
mode, or simply ``DHSS=True`` mode.
.. warning::

View File

@ -3,7 +3,7 @@ Shared File Systems service overview
====================================
The OpenStack Shared File Systems service (manila) provides file storage to a
virtual machine. The Shared File Systems service provides an infrastructure
virtual machine. The Shared File Systems service provides an abstraction
for managing and provisioning of file shares. The service also enables
management of share types as well as share snapshots if a driver supports
them.
@ -11,26 +11,27 @@ them.
The Shared File Systems service consists of the following components:
manila-api
A WSGI app that authenticates and routes requests throughout the Shared File
Systems service. It supports the OpenStack APIs.
A WSGI app that authenticates and routes requests to the Shared File
Systems service.
manila-data
A standalone service whose purpose is to receive requests, process data
operations such as copying, share migration or backup, and send back a
response after an operation has been completed.
A standalone service whose purpose is to process data operations such as
copying, share migration or backup.
manila-scheduler
Schedules and routes requests to the appropriate share service. The
scheduler uses configurable filters and weighers to route requests. The
Filter Scheduler is the default and enables filters on things like Capacity,
Availability Zone, Share Types, and Capabilities as well as custom filters.
Filter Scheduler is the default and enables filters on various attributes
of back ends, such as, Capacity, Availability Zone and other capabilities.
manila-share
Manages back-end devices that provide shared file systems. A manila-share
process can run in one of two modes, with or without handling of share
servers. Share servers export file shares via share networks. When share
servers are not used, the networking requirements are handled outside of
Manila.
service talks to back-end devices by using share back-end drivers as
interfaces. A share driver may operate in one of two modes, with or
without handling of share servers. Share servers export file shares
via share networks. When share servers are not managed by a driver
within the shared file systems service, networking requirements should
be handled out of band of the shared file systems service.
Messaging queue
Routes information between the Shared File Systems processes.

View File

@ -27,20 +27,37 @@ on controllers, compute nodes, or storage nodes.
.. important::
For simplicity, this guide describes configuring the Shared File Systems
service to use the ``generic`` back end with the driver handles
share server mode (DHSS) enabled that uses the `Compute service`
(`nova`), `Networking service` (`neutron`) and `Block storage service`
(`cinder`).
service to use one of either:
Networking service configuration requires the capability of networks being
attached to a public router in order to create share networks.
* the ``generic`` back end with the ``driver_handles_share_servers`` mode
(DHSS) enabled that uses the `Compute service` (`nova`),
`Image service` (`glance`), `Networking service` (`neutron`) and
`Block storage service` (`cinder`); or,
* the ``LVM`` back end with ``driver_handles_share_servers`` mode (DHSS)
disabled.
Before you proceed, ensure that Compute, Networking and Block storage
services are properly working. For networking service, ensure that option
2 is properly configured.
The storage protocol used and referenced in this guide is ``NFS``. As
stated above, the Shared File System service supports different storage
protocols depending on the back end chosen.
For more information, see the `Configuration Reference
For the ``generic`` back end, networking service configuration requires
the capability of networks being attached to a public router in order to
create share networks. If using this back end, ensure that Compute,
Networking and Block storage services are properly working before you
proceed. For networking service, ensure that option 2 (deploying the
networking service with support for self-service networks) is properly
configured.
This installation tutorial also assumes that installation and configuration
of OpenStack packages, Network Time Protocol, database engine and
message queue has been completed as per the instructions in the `OpenStack
Installation Tutorial. <http://docs.openstack.org/#install-guides>`_. The
`Identity Service` (`keystone`) has to be pre-configured with suggested
client environment scripts.
For more information on various Shared File Systems storage back ends,
see the `Shared File Systems Configuration Reference.
<http://docs.openstack.org/mitaka/config-reference/shared-file-systems.html>`_.
This chapter assumes a working setup of OpenStack following the `OpenStack
Installation Tutorial <http://docs.openstack.org/#install-guides>`_
To learn more about installation dependencies noted above, see the `OpenStack
Installation Tutorial. <http://docs.openstack.org/#install-guides>`_

View File

@ -6,9 +6,15 @@ Install and configure a share node
This section describes how to install and configure a share node for the
Shared File Systems service.
.. Note::
.. note::
The manila-share process can run in two modes, with and without handling of
share servers. In general it depends of the driver support.
share servers. Some drivers may support either modes; while some may only
support one of the two modes. See the `Configuration Reference
<http://docs.openstack.org/mitaka/config-reference/shared-file-systems.html>`_
to determine if the driver you choose supports the driver mode desired.
This tutorial describes setting up each driver mode using an example driver
for the mode.
Note that installation and configuration vary by distribution.

View File

@ -1,196 +1,22 @@
.. _post-install:
Creating shared file systems
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Creating and using shared file systems
======================================
Before being able to create a share, manila with the generic driver and
the DHSS mode enabled requires the definition of at least an image,
a network and a share-network for being used to create a share server.
For that `back end` configuration, the share server is an instance where
NFS/CIFS shares are served.
Depending on the option chosen while installing the share node (Option with
share server management and one without); the steps to create and use your
shared file systems will vary. When the Shared File Systems service handles
the creation and management of share servers, you would need to specify the
``share network`` with the request to create a share. Either modes will vary
in their respective share type definition. When using the driver mode with
automatic handling of share servers, a service image is needed as specified
in your configuration. The instructions below enumerate the steps for both
driver modes. Follow what is appropriate for your installation.
.. note::
This configuration automatically creates a cinder volume for every share.
The cinder volumes are attached to share servers according to the
definition of a share network.
Determine the configuration of the share server
-----------------------------------------------
#. Source the admin credentials to gain access to admin-only CLI commands:
.. code-block:: console
$ . admin-openrc.sh
#. Create a default share type before running manila-share service:
.. code-block:: console
$ manila type-create default_share_type True
+--------------------------------------+--------------------+------------+------------+-------------------------------------+-------------------------+
| ID | Name | Visibility | is_default | required_extra_specs | optional_extra_specs |
+--------------------------------------+--------------------+------------+------------+-------------------------------------+-------------------------+
| 8a35da28-0f74-490d-afff-23664ecd4f01 | default_share_type | public | - | driver_handles_share_servers : True | snapshot_support : True |
+--------------------------------------+--------------------+------------+------------+-------------------------------------+-------------------------+
#. Create a manila share server image to the Image service:
.. code-block:: console
$ glance image-create \
--copy-from http://tarballs.openstack.org/manila-image-elements/images/manila-service-image-master.qcow2 \
--name "manila-service-image" \
--disk-format qcow2 \
--container-format bare \
--visibility public --progress
[=============================>] 100%
+------------------+--------------------------------------+
| Property | Value |
+------------------+--------------------------------------+
| checksum | 48a08e746cf0986e2bc32040a9183445 |
| container_format | bare |
| created_at | 2016-01-26T19:52:24Z |
| disk_format | qcow2 |
| id | 1fc7f29e-8fe6-44ef-9c3c-15217e83997c |
| min_disk | 0 |
| min_ram | 0 |
| name | manila-service-image |
| owner | e2c965830ecc4162a002bf16ddc91ab7 |
| protected | False |
| size | 306577408 |
| status | active |
| tags | [] |
| updated_at | 2016-01-26T19:52:28Z |
| virtual_size | None |
| visibility | public |
+------------------+--------------------------------------+
#. List available networks in order to get id and subnets of the private
network:
.. code-block:: console
$ neutron net-list
+--------------------------------------+---------+----------------------------------------------------+
| id | name | subnets |
+--------------------------------------+---------+----------------------------------------------------+
| 0e62efcd-8cee-46c7-b163-d8df05c3c5ad | public | 5cc70da8-4ee7-4565-be53-b9c011fca011 10.3.31.0/24 |
| 7c6f9b37-76b4-463e-98d8-27e5686ed083 | private | 3482f524-8bff-4871-80d4-5774c2730728 172.16.1.0/24 |
+--------------------------------------+---------+----------------------------------------------------+
#. Source the ``demo`` credentials to perform
the following steps as a non-administrative project:
.. code-block:: console
$ . demo-openrc.sh
.. code-block:: console
$ manila share-network-create --name demo-share-network1 \
--neutron-net-id PRIVATE_NETWORK_ID \
--neutron-subnet-id PRIVATE_NETWORK_SUBNET_ID
+-------------------+--------------------------------------+
| Property | Value |
+-------------------+--------------------------------------+
| name | demo-share-network1 |
| segmentation_id | None |
| created_at | 2016-01-26T20:03:41.877838 |
| neutron_subnet_id | 3482f524-8bff-4871-80d4-5774c2730728 |
| updated_at | None |
| network_type | None |
| neutron_net_id | 7c6f9b37-76b4-463e-98d8-27e5686ed083 |
| ip_version | None |
| nova_net_id | None |
| cidr | None |
| project_id | e2c965830ecc4162a002bf16ddc91ab7 |
| id | 58b2f0e6-5509-4830-af9c-97f525a31b14 |
| description | None |
+-------------------+--------------------------------------+
Create a share
--------------
#. Create a NFS share using the share network:
.. code-block:: console
$ manila create NFS 1 --name demo-share1 --share-network demo-share-network1
+-----------------------------+--------------------------------------+
| Property | Value |
+-----------------------------+--------------------------------------+
| status | None |
| share_type_name | None |
| description | None |
| availability_zone | None |
| share_network_id | None |
| export_locations | [] |
| host | None |
| snapshot_id | None |
| is_public | False |
| task_state | None |
| snapshot_support | True |
| id | 016ca18f-bdd5-48e1-88c0-782e4c1aa28c |
| size | 1 |
| name | demo-share1 |
| share_type | None |
| created_at | 2016-01-26T20:08:50.502877 |
| export_location | None |
| share_proto | NFS |
| consistency_group_id | None |
| source_cgsnapshot_member_id | None |
| project_id | 48e8c35b2ac6495d86d4be61658975e7 |
| metadata | {} |
+-----------------------------+--------------------------------------+
#. After some time, the share status should change from ``creating``
to ``available``:
.. code-block:: console
$ manila list
+--------------------------------------+-------------+------+-------------+-----------+-----------+--------------------------------------+---------------------------------------------------------------+-----------------------------+-------------------+
| ID | Name | Size | Share Proto | Status | Is Public | Share Type | Export location | Host | Availability Zone |
+--------------------------------------+-------------+------+-------------+-----------+-----------+--------------------------------------+---------------------------------------------------------------+-----------------------------+-------------------+
| 5f8a0574-a95e-40ff-b898-09fd8d6a1fac | demo-share1 | 1 | NFS | available | False | 8a35da28-0f74-490d-afff-23664ecd4f01 | 10.254.0.6:/shares/share-0bfd69a1-27f0-4ef5-af17-7cd50bce6550 | storagenode@generic#GENERIC | nova |
+--------------------------------------+-------------+------+-------------+-----------+-----------+--------------------------------------+---------------------------------------------------------------+-----------------------------+-------------------+
#. Configure user access to the new share before attempting to mount it via
the network:
.. important ::
The image used for launching an instance and mounting a share must have
the NFS packages provided by the distro. Example: The cirros image
created at the image service section is not enough.
.. important ::
Use an instance that is connected to the private network used to create
the share-network.
.. code-block:: console
$ manila access-allow demo-share1 ip INSTANCE_PRIVATE_NETWORK_IP
Mount the share from an instance
--------------------------------
#. Create a folder where the mount will be placed:
.. code-block:: console
$ mkdir ~/test_folder
#. Mount the NFS share in the instance using the export location of the share:
.. code-block:: console
$ mount -v 10.254.0.6:/shares/share-0bfd69a1-27f0-4ef5-af17-7cd50bce6550 ~/test_folder
.. include:: common/dhss-false-mode-using-shared-file-systems.rst
.. include:: common/dhss-true-mode-using-shared-file-systems.rst
For more information about how to manage shares, see the
`OpenStack User Guide
<http://docs.openstack.org/user-guide/index.html>`__.
`OpenStack End User Guide
<http://docs.openstack.org/user-guide/cli_manage_shares.html>`_