.. _config-logging: ================================ Neutron Packet Logging Framework ================================ Packet logging service is designed as a Neutron plug-in that captures network packets for relevant resources (e.g. security group or firewall group) when the registered events occur. .. image:: figures/logging-framework.png :width: 100% :alt: Packet Logging Framework Supported loggable resource types ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ From Rocky release, both of ``security_group`` and ``firewall_group`` are supported as resource types in Neutron packet logging framework. Service Configuration ~~~~~~~~~~~~~~~~~~~~~ To enable the logging service, follow the below steps. #. On Neutron controller node, add ``log`` to ``service_plugins`` setting in ``/etc/neutron/neutron.conf`` file. For example: .. code-block:: none service_plugins = router,metering,log #. To enable logging service for ``security_group`` in Layer 2, add ``log`` to option ``extensions`` in section ``[agent]`` in ``/etc/neutron/plugins/ml2/ml2_conf.ini`` for controller node and in ``/etc/neutron/plugins/ml2/openvswitch_agent.ini`` for compute/network nodes. For example: .. code-block:: ini [agent] extensions = log .. note:: Fwaas v2 log is currently only supported by openvswitch, the firewall logging driver of linuxbridge is not implemented. #. To enable logging service for ``firewall_group`` in Layer 3, add ``fwaas_v2_log`` to option ``extensions`` in section ``[AGENT]`` in ``/etc/neutron/l3_agent.ini`` for network nodes. For example: .. code-block:: ini [AGENT] extensions = fwaas_v2,fwaas_v2_log #. On compute/network nodes, add configuration for logging service to ``[network_log]`` in ``/etc/neutron/plugins/ml2/openvswitch_agent.ini`` and in ``/etc/neutron/l3_agent.ini`` as shown bellow: .. code-block:: ini [network_log] rate_limit = 100 burst_limit = 25 #local_output_log_base = In which, ``rate_limit`` is used to configure the maximum number of packets to be logged per second (packets per second). When a high rate triggers ``rate_limit``, logging queues packets to be logged. ``burst_limit`` is used to configure the maximum of queued packets. And logged packets can be stored anywhere by using ``local_output_log_base``. .. note:: - It requires at least ``100`` for ``rate_limit`` and at least ``25`` for ``burst_limit``. - If ``rate_limit`` is unset, logging will log unlimited. - If we don't specify ``local_output_log_base``, logged packets will be stored in system journal like ``/var/log/syslog`` by default. Trusted projects policy.json configuration ---------------------------------------------- With the default ``/etc/neutron/policy.json``, administrators must set up resource logging on behalf of the cloud projects. If projects are trusted to administer their own loggable resources in their cloud, neutron's policy file ``policy.json`` can be modified to allow this. Modify ``/etc/neutron/policy.json`` entries as follows: .. code-block:: none "get_loggable_resources": "rule:regular_user", "create_log": "rule:regular_user", "get_log": "rule:regular_user", "get_logs": "rule:regular_user", "update_log": "rule:regular_user", "delete_log": "rule:regular_user", Service workflow for Operator ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #. To check the loggable resources that are supported by framework: .. code-block:: console $ openstack network loggable resources list +-----------------+ | Supported types | +-----------------+ | security_group | | firewall_group | +-----------------+ .. note:: - In VM ports, logging for ``security_group`` in currently works with ``openvswitch`` firewall driver only. ``linuxbridge`` is under development. - Logging for ``firewall_group`` works on internal router ports only. VM ports would be supported in the future. #. Log creation: * Create a logging resource with an appropriate resource type .. code-block:: console $ openstack network log create --resource-type security_group \ --description "Collecting all security events" \ --event ALL Log_Created +-----------------+------------------------------------------------+ | Field | Value | +-----------------+------------------------------------------------+ | Description | Collecting all security events | | Enabled | True | | Event | ALL | | ID | 8085c3e6-0fa2-4954-b5ce-ff6207931b6d | | Name | Log_Created | | Project | 02568bd62b414221956f15dbe9527d16 | | Resource | None | | Target | None | | Type | security_group | | created_at | 2017-07-05T02:56:43Z | | revision_number | 0 | | tenant_id | 02568bd62b414221956f15dbe9527d16 | | updated_at | 2017-07-05T02:56:43Z | +-----------------+------------------------------------------------+ .. warning:: In the case of ``--resource`` and ``--target`` are not specified from the request, these arguments will be assigned to ``ALL`` by default. Hence, there is an enormous range of log events will be created. * Create logging resource with a given resource (sg1 or fwg1) .. code-block:: console $ openstack network log create my-log --resource-type security_group --resource sg1 $ openstack network log create my-log --resource-type firewall_group --resource fwg1 * Create logging resource with a given target (portA) .. code-block:: console $ openstack network log create my-log --resource-type security_group --target portA * Create logging resource for only the given target (portB) and the given resource (sg1 or fwg1) .. code-block:: console $ openstack network log create my-log --resource-type security_group --target portB --resource sg1 $ openstack network log create my-log --resource-type firewall_group --target portB --resource fwg1 .. note:: - The ``Enabled`` field is set to ``True`` by default. If enabled, logged events are written to the destination if ``local_output_log_base`` is configured or ``/var/log/syslog`` in default. - The ``Event`` field will be set to ``ALL`` if ``--event`` is not specified from log creation request. #. Enable/Disable log We can ``enable`` or ``disable`` logging objects at runtime. It means that it will apply to all registered ports with the logging object immediately. For example: .. code-block:: console $ openstack network log set --disable Log_Created $ openstack network log show Log_Created +-----------------+------------------------------------------------+ | Field | Value | +-----------------+------------------------------------------------+ | Description | Collecting all security events | | Enabled | False | | Event | ALL | | ID | 8085c3e6-0fa2-4954-b5ce-ff6207931b6d | | Name | Log_Created | | Project | 02568bd62b414221956f15dbe9527d16 | | Resource | None | | Target | None | | Type | security_group | | created_at | 2017-07-05T02:56:43Z | | revision_number | 1 | | tenant_id | 02568bd62b414221956f15dbe9527d16 | | updated_at | 2017-07-05T03:12:01Z | +-----------------+------------------------------------------------+ Logged events description ~~~~~~~~~~~~~~~~~~~~~~~~~ Currently, packet logging framework supports to collect ``ACCEPT`` or ``DROP`` or both events related to registered resources. As mentioned above, Neutron packet logging framework offers two loggable resources through the ``log`` service plug-in: ``security_group`` and ``firewall_group``. The general characteristics of each event will be shown as the following: * Log every ``DROP`` event: Every ``DROP`` security events will be generated when an incoming or outgoing session is blocked by the security groups or firewall groups * Log an ``ACCEPT`` event: The ``ACCEPT`` security event will be generated only for each ``NEW`` incoming or outgoing session that is allowed by security groups or firewall groups. More details for the ``ACCEPT`` events are shown as bellow: * North/South ``ACCEPT``: For a North/South session there would be a single ``ACCEPT`` event irrespective of direction. * East/West ``ACCEPT``/``ACCEPT``: In an intra-project East/West session where the originating port allows the session and the destination port allows the session, i.e. the traffic is allowed, there would be two ``ACCEPT`` security events generated, one from the perspective of the originating port and one from the perspective of the destination port. * East/West ``ACCEPT``/``DROP``: In an intra-project East/West session initiation where the originating port allows the session and the destination port does not allow the session there would be ``ACCEPT`` security events generated from the perspective of the originating port and ``DROP`` security events generated from the perspective of the destination port. #. The security events that are collected by security group should include: * A timestamp of the flow. * A status of the flow ``ACCEPT``/``DROP``. * An indication of the originator of the flow, e.g which project or log resource generated the events. * An identifier of the associated instance interface (neutron port id). * A layer 2, 3 and 4 information (mac, address, port, protocol, etc). * Security event record format: * Logged data of an ``ACCEPT`` event would look like: .. code-block:: console May 5 09:05:07 action=ACCEPT project_id=736672c700cd43e1bd321aeaf940365c log_resource_ids=['4522efdf-8d44-4e19-b237-64cafc49469b', '42332d89-df42-4588-a2bb-3ce50829ac51'] vm_port=e0259ade-86de-482e-a717-f58258f7173f ethernet(dst='fa:16:3e:ec:36:32',ethertype=2048,src='fa:16:3e:50:aa:b5'), ipv4(csum=62071,dst='10.0.0.4',flags=2,header_length=5,identification=36638,offset=0, option=None,proto=6,src='172.24.4.10',tos=0,total_length=60,ttl=63,version=4), tcp(ack=0,bits=2,csum=15097,dst_port=80,offset=10,option=[TCPOptionMaximumSegmentSize(kind=2,length=4,max_seg_size=1460), TCPOptionSACKPermitted(kind=4,length=2), TCPOptionTimestamps(kind=8,length=10,ts_ecr=0,ts_val=196418896), TCPOptionNoOperation(kind=1,length=1), TCPOptionWindowScale(kind=3,length=3,shift_cnt=3)], seq=3284890090,src_port=47825,urgent=0,window_size=14600) * Logged data of a ``DROP`` event: .. code-block:: console May 5 09:05:07 action=DROP project_id=736672c700cd43e1bd321aeaf940365c log_resource_ids=['4522efdf-8d44-4e19-b237-64cafc49469b'] vm_port=e0259ade-86de-482e-a717-f58258f7173f ethernet(dst='fa:16:3e:ec:36:32',ethertype=2048,src='fa:16:3e:50:aa:b5'), ipv4(csum=62071,dst='10.0.0.4',flags=2,header_length=5,identification=36638,offset=0, option=None,proto=6,src='172.24.4.10',tos=0,total_length=60,ttl=63,version=4), tcp(ack=0,bits=2,csum=15097,dst_port=80,offset=10,option=[TCPOptionMaximumSegmentSize(kind=2,length=4,max_seg_size=1460), TCPOptionSACKPermitted(kind=4,length=2), TCPOptionTimestamps(kind=8,length=10,ts_ecr=0,ts_val=196418896), TCPOptionNoOperation(kind=1,length=1), TCPOptionWindowScale(kind=3,length=3,shift_cnt=3)], seq=3284890090,src_port=47825,urgent=0,window_size=14600) #. The events that are collected by firewall group should include: * A timestamp of the flow. * A status of the flow ``ACCEPT``/``DROP``. * The identifier of log objects that are collecting this event * An identifier of the associated instance interface (neutron port id). * A layer 2, 3 and 4 information (mac, address, port, protocol, etc). * Security event record format: * Logged data of an ``ACCEPT`` event would look like: .. code-block:: console Jul 26 14:46:20: action=ACCEPT, log_resource_ids=[u'2e030f3a-e93d-4a76-bc60-1d11c0f6561b'], port=9882c485-b808-4a34-a3fb-b537642c66b2 pkt=ethernet(dst='fa:16:3e:8f:47:c5',ethertype=2048,src='fa:16:3e:1b:3e:67') ipv4(csum=47423,dst='10.10.1.16',flags=2,header_length=5,identification=27969,offset=0,option=None,proto=1,src='10.10.0.5',tos=0,total_length=84,ttl=63,version=4) icmp(code=0,csum=41376,data=echo(data='\xe5\xf2\xfej\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00 \x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00 \x00\x00\x00\x00\x00\x00\x00',id=29185,seq=0),type=8) * Logged data of a ``DROP`` event: .. code-block:: console Jul 26 14:51:20: action=DROP, log_resource_ids=[u'2e030f3a-e93d-4a76-bc60-1d11c0f6561b'], port=9882c485-b808-4a34-a3fb-b537642c66b2 pkt=ethernet(dst='fa:16:3e:32:7d:ff',ethertype=2048,src='fa:16:3e:28:83:51') ipv4(csum=17518,dst='10.10.0.5',flags=2,header_length=5,identification=57874,offset=0,option=None,proto=1,src='10.10.1.16',tos=0,total_length=84,ttl=63,version=4) icmp(code=0,csum=23772,data=echo(data='\x8a\xa0\xac|\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00 \x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00 \x00\x00\x00\x00\x00\x00\x00',id=25601,seq=5),type=8) .. note:: No other extraneous events are generated within the security event logs, e.g. no debugging data, etc.