====================== Live-migrate instances ====================== Live-migrating an instance means moving its virtual machine to a different OpenStack Compute server while the instance continues running. Before starting a live-migration, review the chapter :ref:`section_configuring-compute-migrations`. It covers the configuration settings required to enable live-migration, but also reasons for migrations and non-live-migration options. The instructions below cover shared-storage and volume-backed migration. To block-migrate instances, add the command-line option ``-block-migrate`` to the :command:`nova live-migration` command, and ``--block-migration`` to the :command:`openstack server migrate` command. .. _section-manual-selection-of-dest: Manual selection of the destination host ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #. Obtain the ID of the instance you want to migrate: .. code-block:: console $ openstack server list +--------------------------------------+------+--------+-----------------+------------+ | ID | Name | Status | Networks | Image Name | +--------------------------------------+------+--------+-----------------+------------+ | d1df1b5a-70c4-4fed-98b7-423362f2c47c | vm1 | ACTIVE | private=a.b.c.d | ... | | d693db9e-a7cf-45ef-a7c9-b3ecb5f22645 | vm2 | ACTIVE | private=e.f.g.h | ... | +--------------------------------------+------+--------+-----------------+------------+ #. Determine on which host the instance is currently running. In this example, ``vm1`` is running on ``HostB``: .. code-block:: console $ openstack server show d1df1b5a-70c4-4fed-98b7-423362f2c47c +----------------------+--------------------------------------+ | Field | Value | +----------------------+--------------------------------------+ | ... | ... | | OS-EXT-SRV-ATTR:host | HostB | | ... | ... | | addresses | a.b.c.d | | flavor | m1.tiny | | id | d1df1b5a-70c4-4fed-98b7-423362f2c47c | | name | vm1 | | status | ACTIVE | | ... | ... | +----------------------+--------------------------------------+ #. Select the compute node the instance will be migrated to. In this example, we will migrate the instance to ``HostC``, because ``nova-compute`` is running on it: .. code-block:: console $ openstack compute service list +----+------------------+-------+----------+---------+-------+----------------------------+ | ID | Binary | Host | Zone | Status | State | Updated At | +----+------------------+-------+----------+---------+-------+----------------------------+ | 3 | nova-conductor | HostA | internal | enabled | up | 2017-02-18T09:42:29.000000 | | 4 | nova-scheduler | HostA | internal | enabled | up | 2017-02-18T09:42:26.000000 | | 5 | nova-consoleauth | HostA | internal | enabled | up | 2017-02-18T09:42:29.000000 | | 6 | nova-compute | HostB | nova | enabled | up | 2017-02-18T09:42:29.000000 | | 7 | nova-compute | HostC | nova | enabled | up | 2017-02-18T09:42:29.000000 | +----+------------------+-------+----------+---------+-------+----------------------------+ #. Check that ``HostC`` has enough resources for migration: .. code-block:: console $ openstack host show HostC +-------+------------+-----+-----------+---------+ | Host | Project | CPU | Memory MB | Disk GB | +-------+------------+-----+-----------+---------+ | HostC | (total) | 16 | 32232 | 878 | | HostC | (used_now) | 22 | 21284 | 422 | | HostC | (used_max) | 22 | 21284 | 422 | | HostC | p1 | 22 | 21284 | 422 | | HostC | p2 | 22 | 21284 | 422 | +-------+------------+-----+-----------+---------+ - ``cpu``: Number of CPUs - ``memory_mb``: Total amount of memory, in MB - ``disk_gb``: Total amount of space for NOVA-INST-DIR/instances, in GB In this table, the first row shows the total amount of resources available on the physical server. The second line shows the currently used resources. The third line shows the maximum used resources. The fourth line and below shows the resources available for each project. #. Migrate the instance: .. code-block:: console $ openstack server migrate d1df1b5a-70c4-4fed-98b7-423362f2c47c --live HostC #. Confirm that the instance has been migrated successfully: .. code-block:: console $ openstack server show d1df1b5a-70c4-4fed-98b7-423362f2c47c +----------------------+--------------------------------------+ | Field | Value | +----------------------+--------------------------------------+ | ... | ... | | OS-EXT-SRV-ATTR:host | HostC | | ... | ... | +----------------------+--------------------------------------+ If the instance is still running on ``HostB``, the migration failed. The ``nova-scheduler`` and ``nova-conductor`` log files on the controller and the ``nova-compute`` log file on the source compute host can help pin-point the problem. .. _auto_selection_of_dest: Automatic selection of the destination host ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ To leave the selection of the destination host to the Compute service, use the nova command-line client. #. Obtain the instance ID as shown in step 1 of the section :ref:`section-manual-selection-of-dest`. #. Leave out the host selection steps 2, 3, and 4. #. Migrate the instance: .. code-block:: console $ nova live-migration d1df1b5a-70c4-4fed-98b7-423362f2c47c Monitoring the migration ~~~~~~~~~~~~~~~~~~~~~~~~ #. Confirm that the instance is migrating: .. code-block:: console $ openstack server show d1df1b5a-70c4-4fed-98b7-423362f2c47c +----------------------+--------------------------------------+ | Field | Value | +----------------------+--------------------------------------+ | ... | ... | | status | MIGRATING | | ... | ... | +----------------------+--------------------------------------+ #. Check progress Use the nova command-line client for nova's migration monitoring feature. First, obtain the migration ID: .. code-block:: console $ nova server-migration-list d1df1b5a-70c4-4fed-98b7-423362f2c47c +----+-------------+----------- (...) | Id | Source Node | Dest Node | (...) +----+-------------+-----------+ (...) | 2 | - | - | (...) +----+-------------+-----------+ (...) For readability, most output columns were removed. Only the first column, **Id**, is relevant. In this example, the migration ID is 2. Use this to get the migration status. .. code-block:: console $ nova server-migration-show d1df1b5a-70c4-4fed-98b7-423362f2c47c 2 +------------------------+--------------------------------------+ | Property | Value | +------------------------+--------------------------------------+ | created_at | 2017-03-08T02:53:06.000000 | | dest_compute | controller | | dest_host | - | | dest_node | - | | disk_processed_bytes | 0 | | disk_remaining_bytes | 0 | | disk_total_bytes | 0 | | id | 2 | | memory_processed_bytes | 65502513 | | memory_remaining_bytes | 786427904 | | memory_total_bytes | 1091379200 | | server_uuid | d1df1b5a-70c4-4fed-98b7-423362f2c47c | | source_compute | compute2 | | source_node | - | | status | running | | updated_at | 2017-03-08T02:53:47.000000 | +------------------------+--------------------------------------+ The output shows that the migration is running. Progress is measured by the number of memory bytes that remain to be copied. If this number is not decreasing over time, the migration may be unable to complete, and it may be aborted by the Compute service. .. note:: The command reports that no disk bytes are processed, even in the event of block migration. What to do when the migration times out ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ During the migration process, the instance may write to a memory page after that page has been copied to the destination. When that happens, the same page has to be copied again. The instance may write to memory pages faster than they can be copied, so that the migration cannot complete. There are two optional actions, controlled by :oslo.config:option:`libvirt.live_migration_timeout_action`, which can be taken against a VM after :oslo.config:option:`libvirt.live_migration_completion_timeout` is reached: 1. ``abort`` (default): The live migration operation will be cancelled after the completion timeout is reached. This is similar to using API ``DELETE /servers/{server_id}/migrations/{migration_id}``. 2. ``force_complete``: The compute service will either pause the VM or trigger post-copy depending on if post copy is enabled and available (:oslo.config:option:`libvirt.live_migration_permit_post_copy` is set to `True`). This is similar to using API ``POST /servers/{server_id}/migrations/{migration_id}/action (force_complete)``. You can also read the :oslo.config:option:`libvirt.live_migration_timeout_action` configuration option help for more details. The following remarks assume the KVM/Libvirt hypervisor. How to know that the migration timed out ---------------------------------------- To determine that the migration timed out, inspect the ``nova-compute`` log file on the source host. The following log entry shows that the migration timed out: .. code-block:: console # grep WARNING.*d1df1b5a-70c4-4fed-98b7-423362f2c47c /var/log/nova/nova-compute.log ... WARNING nova.virt.libvirt.migration [req-...] [instance: ...] live migration not completed after 1800 sec The Compute service also cancels migrations when the memory copy seems to make no progress. This feature is `disabled by default`_, but it can be enabled using the configuration parameter :oslo.config:option:`libvirt.live_migration_progress_timeout`. Should this be the case, you may find the following message in the log: .. code-block:: console WARNING nova.virt.libvirt.migration [req-...] [instance: ...] live migration stuck for 150 sec .. _disabled by default: https://review.openstack.org/#/c/431635/ Addressing migration timeouts ----------------------------- To stop the migration from putting load on infrastructure resources like network and disks, you may opt to cancel it manually. .. code-block:: console $ nova live-migration-abort INSTANCE_ID MIGRATION_ID To make live-migration succeed, you have several options: - **Manually force-complete the migration** .. code-block:: console $ nova live-migration-force-complete INSTANCE_ID MIGRATION_ID The instance is paused until memory copy completes. .. caution:: Since the pause impacts time keeping on the instance and not all applications tolerate incorrect time settings, use this approach with caution. - **Enable auto-convergence** Auto-convergence is a Libvirt feature. Libvirt detects that the migration is unlikely to complete and slows down its CPU until the memory copy process is faster than the instance's memory writes. To enable auto-convergence, set ``live_migration_permit_auto_converge=true`` in ``nova.conf`` and restart ``nova-compute``. Do this on all compute hosts. .. caution:: One possible downside of auto-convergence is the slowing down of the instance. - **Enable post-copy** This is a Libvirt feature. Libvirt detects that the migration does not progress and responds by activating the virtual machine on the destination host before all its memory has been copied. Access to missing memory pages result in page faults that are satisfied from the source host. To enable post-copy, set ``live_migration_permit_post_copy=true`` in ``nova.conf`` and restart ``nova-compute``. Do this on all compute hosts. When post-copy is enabled, manual force-completion does not pause the instance but switches to the post-copy process. .. caution:: Possible downsides: - When the network connection between source and destination is interrupted, page faults cannot be resolved anymore, and the virtual machine is rebooted. - Post-copy may lead to an increased page fault rate during migration, which can slow the instance down.