diff --git a/devstack/files/apache-trove-api.template b/devstack/files/apache-trove-api.template
new file mode 100644
index 0000000000..06c88b2685
--- /dev/null
+++ b/devstack/files/apache-trove-api.template
@@ -0,0 +1,45 @@
+# Copyright 2017 Amrith Kumar.
+# All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License. You may obtain
+# a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+# License for the specific language governing permissions and limitations
+# under the License.
+
+# This is an example Apache2 configuration file for using the
+# Watcher API through mod_wsgi.  This version assumes you are
+# running devstack to configure the software.
+
+Listen %TROVE_SERVICE_PORT%
+
+<VirtualHost *:%TROVE_SERVICE_PORT%>
+    WSGIDaemonProcess trove-api user=%USER% processes=%APIWORKERS% threads=1 display-name=%{GROUP}
+    WSGIScriptAlias / %TROVE_WSGI_DIR%/app.wsgi
+    WSGIApplicationGroup %{GLOBAL}
+    WSGIProcessGroup trove-api
+    WSGIPassAuthorization On
+
+    ErrorLogFormat "%M"
+    ErrorLog /var/log/%APACHE_NAME%/trove-api.log
+    CustomLog /var/log/%APACHE_NAME%/trove-api-access.log combined
+
+
+    <Directory %TROVE_WSGI_DIR%>
+        WSGIProcessGroup trove-api
+        WSGIApplicationGroup %{GLOBAL}
+        <IfVersion >= 2.4>
+            Require all granted
+        </IfVersion>
+        <IfVersion < 2.4>
+            Order allow,deny
+            Allow from all
+        </IfVersion>
+    </Directory>
+</VirtualHost>
diff --git a/devstack/plugin.sh b/devstack/plugin.sh
index b423ff27bc..e64e8b0db5 100644
--- a/devstack/plugin.sh
+++ b/devstack/plugin.sh
@@ -64,6 +64,14 @@ function create_trove_accounts {
     fi
 }
 
+# _cleanup_trove_apache_wsgi - Removes all the WSGI related files and
+# restart apache.
+function _cleanup_trove_apache_wsgi {
+    sudo rm -rf $TROVE_WSGI_DIR
+    sudo rm -f ${apache_site_config_for trove-api}
+    restart_apache_server
+}
+
 # stack.sh entry points
 # ---------------------
 
@@ -77,6 +85,11 @@ function cleanup_trove {
     if is_service_enabled horizon; then
         cleanup_trove_dashboard
     fi
+
+    if [[ "${TROVE_USE_MOD_WSGI}" == "TRUE" ]]; then
+        echo "Cleaning up Trove's WSGI setup"
+        _cleanup_trove_apache_wsgi
+    fi
 }
 
 
@@ -139,6 +152,27 @@ function configure_nova_kvm {
     echo "configure_nova_kvm: using virt_type: ${virt_type} for cpu: ${cpu}."
 }
 
+# _config_trove_apache_wsgi() - Setup WSGI config files for Trove and
+# enable the site
+function _config_trove_apache_wsgi {
+    local trove_apache_conf
+
+    sudo mkdir -p ${TROVE_WSGI_DIR}
+    sudo cp $TROVE_DIR/trove/cmd/app.wsgi $TROVE_WSGI_DIR/app.wsgi
+    trove_apache_conf=$(apache_site_config_for trove-api)
+    sudo cp $TROVE_DEVSTACK_FILES/apache-trove-api.template ${trove_apache_conf}
+    sudo sed -e "
+        s|%TROVE_SERVICE_PORT%|${TROVE_SERVICE_PORT}|g;
+        s|%TROVE_WSGI_DIR%|${TROVE_WSGI_DIR}|g;
+        s|%USER%|${STACK_USER}|g;
+        s|%APACHE_NAME%|${APACHE_NAME}|g;
+        s|%APIWORKERS%|${API_WORKERS}|g;
+    " -i ${trove_apache_conf}
+    enable_apache_site trove-api
+    tail_log trove-access /var/log/${APACHE_NAME}/trove-api-access.log
+    tail_log trove-api /var/log/${APACHE_NAME}/trove-api.log
+}
+
 # configure_trove() - Set config files, create data dirs, etc
 function configure_trove {
     setup_develop $TROVE_DIR
@@ -185,6 +219,12 @@ function configure_trove {
         iniset $TROVE_CONF DEFAULT trove_auth_url $TROVE_AUTH_ENDPOINT
     fi
 
+    # configure apache related files
+    if [[ "${TROVE_USE_MOD_WSGI}" == "TRUE" ]]; then
+        echo "Configuring Trove to use mod-wsgi and Apache"
+        _config_trove_apache_wsgi
+    fi
+
     # (Re)create trove taskmanager conf file if needed
     if is_service_enabled tr-tmgr; then
         # Use these values only if they're set
@@ -265,6 +305,11 @@ function configure_trove {
 function install_trove {
     setup_develop $TROVE_DIR
 
+    if [[ "${TROVE_USE_MOD_WSGI}" == "TRUE" ]]; then
+        echo "Installing apache wsgi"
+        install_apache_wsgi
+    fi
+
     if is_service_enabled horizon; then
         install_trove_dashboard
     fi
@@ -491,7 +536,13 @@ function finalize_trove_network {
 
 # start_trove() - Start running processes, including screen
 function start_trove {
-    run_process tr-api "$TROVE_BIN_DIR/trove-api --config-file=$TROVE_CONF --debug"
+    if [[ ${TROVE_USE_MOD_WSGI}" == TRUE" ]]; then
+        echo "Restarting Apache server ..."
+        enable_apache_site trove-api
+        restart_apache_server
+    else
+        run_process tr-api "$TROVE_BIN_DIR/trove-api --config-file=$TROVE_CONF --debug"
+    fi
     run_process tr-tmgr "$TROVE_BIN_DIR/trove-taskmanager --config-file=$TROVE_TASKMANAGER_CONF --debug"
     run_process tr-cond "$TROVE_BIN_DIR/trove-conductor --config-file=$TROVE_CONDUCTOR_CONF --debug"
 }
@@ -500,7 +551,13 @@ function start_trove {
 function stop_trove {
     # Kill the trove screen windows
     local serv
-    for serv in tr-api tr-tmgr tr-cond; do
+    if [[ ${TROVE_USE_MOD_WSGI} == "TRUE" ]]; then
+        echo "Disabling Trove API in Apache"
+        disable_apache_site trove-api
+    else
+        stop_process tr-api
+    fi
+    for serv in tr-tmgr tr-cond; do
         stop_process $serv
     done
 }
diff --git a/devstack/settings b/devstack/settings
index be3074f46e..2dff5fb390 100644
--- a/devstack/settings
+++ b/devstack/settings
@@ -61,4 +61,13 @@ TROVE_MANAGE=$TROVE_BIN_DIR/trove-manage
 # Tell Tempest this project is present
 TEMPEST_SERVICES+=,trove
 
+# By default enable Trove API behind mod-wsgi. Change this to FALSE
+# if you don't want Apache/mod-wsgi
+TROVE_USE_MOD_WSGI=$(trueorfalse TRUE TROVE_USE_MOD_WSGI)
+
+TROVE_SERVICE_PORT=${TROVE_SERVICE_PORT:-8779}
+TROVE_DEVSTACK_DIR=${TROVE_DIR}/devstack
+TROVE_DEVSTACK_FILES=${TROVE_DEVSTACK_DIR}/files
+TROVE_WSGI_DIR=${TROVE_WSGI_DIR:-/var/www/trove}
+
 enable_service trove tr-api tr-tmgr tr-cond
diff --git a/doc/source/deploy/apache-mod-wsgi.rst b/doc/source/deploy/apache-mod-wsgi.rst
new file mode 100644
index 0000000000..f3b8ce527e
--- /dev/null
+++ b/doc/source/deploy/apache-mod-wsgi.rst
@@ -0,0 +1,49 @@
+..
+      Except where otherwise noted, this document is licensed under Creative
+      Commons Attribution 3.0 License.  You can view the license at:
+
+          https://creativecommons.org/licenses/by/3.0/
+
+
+Installing API behind mod_wsgi
+==============================
+
+#. Install the Apache Service::
+
+    Fedora 21/RHEL7/CentOS7:
+      sudo yum install httpd
+
+    Fedora 22 (or higher):
+      sudo dnf install httpd
+
+    Debian/Ubuntu:
+      apt-get install apache2
+
+#. Copy ``etc/apache2/trove`` under the apache sites::
+
+    Fedora/RHEL7/CentOS7:
+      sudo cp etc/apache2/trove /etc/httpd/conf.d/trove-api.conf
+
+    Debian/Ubuntu:
+      sudo cp etc/apache2/trove /etc/apache2/sites-available/trove-api.conf
+
+#. Edit ``<apache-configuration-dir>/trove-api.conf`` according to installation
+   and environment.
+
+   * Modify the ``WSGIDaemonProcess`` directive to set the ``user`` and
+     ``group`` values to appropriate user on your server.
+   * Modify the ``WSGIScriptAlias`` directive to point to the
+     trove/api/app.wsgi script.
+   * Modify the ``Directory`` directive to set the path to the Trove API
+     code.
+   * Modify the ``ErrorLog and CustomLog`` to redirect the logs to the right
+     directory.
+
+#. Enable the apache trove site and reload::
+
+    Fedora/RHEL7/CentOS7:
+      sudo systemctl reload httpd
+
+   Debian/Ubuntu:
+    sudo a2ensite trove
+    sudo service apache2 reload
diff --git a/doc/source/index.rst b/doc/source/index.rst
index f3ced705db..a7cb4ae21e 100644
--- a/doc/source/index.rst
+++ b/doc/source/index.rst
@@ -52,6 +52,7 @@ functionality, the following resources are provided.
   dev/notifier.rst
   dev/trove_api_extensions.rst
   dev/secure_oslo_messaging.rst
+  deploy/apache-mod-wsgi
 
 * Source Code Repositories
 
diff --git a/etc/apache2/trove b/etc/apache2/trove
new file mode 100644
index 0000000000..b6341f9567
--- /dev/null
+++ b/etc/apache2/trove
@@ -0,0 +1,36 @@
+# Copyright 2017 Amrith Kumar.
+# All Rights Reserved.
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License. You may obtain
+# a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+# License for the specific language governing permissions and limitations
+# under the License.
+
+# This is an example Apache2 configuration file for using Trove API
+through mod_wsgi
+
+Listen 8779
+
+<VirtualHost *:8779>
+    WSGIDaemonProcess trove-api user=stack group=stack processes=2 threads=2 display-name=%{GROUP}
+    WSGIScriptAlias / /opt/stack/trove/trove/cmd/app.wsgi
+    WSGIProcessGroup trove-api
+
+    ErrorLog /var/log/httpd/trove_error.log
+    LogLevel info
+    CustomLog /var/log/httpd/trove_access.log combined
+
+    <Directory /opt/stack/trove/trove/cmd>
+        WSGIProcessGroup trove-api
+        WSGIApplicationGroup %{GLOBAL}
+        AllowOverride All
+        Require all granted
+    </Directory>
+</VirtualHost>
+
diff --git a/integration/scripts/trovestack b/integration/scripts/trovestack
index 8b1ba4ec9b..d48cc92c10 100755
--- a/integration/scripts/trovestack
+++ b/integration/scripts/trovestack
@@ -74,6 +74,7 @@ export RELEASE=${RELEASE:-$DISTRO_RELEASE}
 # allow overrides from devstack if already set
 [[ -f $PATH_DEVSTACK_SRC/functions-common ]] && source $PATH_DEVSTACK_SRC/functions-common
 [[ -f $PATH_DEVSTACK_SRC/functions ]] && source $PATH_DEVSTACK_SRC/functions
+[[ -f $PATH_DEVSTACK_SRC/lib/apache ]] && source $PATH_DEVSTACK_SRC/lib/apache
 
 # Set up variables for the CONF files - this has to happen after loading trovestack.rc, since
 # TROVE_CONF_DIR is defined there - these will be used by devstack too
diff --git a/trove/cmd/app.wsgi b/trove/cmd/app.wsgi
new file mode 100644
index 0000000000..097972e4d3
--- /dev/null
+++ b/trove/cmd/app.wsgi
@@ -0,0 +1,40 @@
+# Copyright 2017 Amrith Kumar.
+# All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License. You may obtain
+# a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+# License for the specific language governing permissions and limitations
+# under the License.
+"""
+Used for deploying Trove API through mod-wsgi
+"""
+
+from oslo_log import log as logging
+from trove.cmd.common import with_initialize
+from trove.common import pastedeploy
+from trove.common import profile
+
+LOG = logging.getLogger('trove.cmd.app')
+
+@with_initialize
+def wsgimain(CONF):
+    from trove.common import cfg
+    from trove.common import notification
+    from trove.instance import models as inst_models
+
+    notification.DBaaSAPINotification.register_notify_callback(
+        inst_models.persist_instance_fault)
+    cfg.set_api_config_defaults()
+    profile.setup_profiler('api', CONF.host)
+    conf_file = CONF.find_file(CONF.api_paste_config)
+    LOG.debug("Trove started on %s", CONF.host)
+    return pastedeploy.paste_deploy_app(conf_file, 'trove', {})
+
+application = wsgimain()