diff --git a/install-guide/source/conf.py b/install-guide/source/conf.py
new file mode 100644
index 00000000..5af5e3e8
--- /dev/null
+++ b/install-guide/source/conf.py
@@ -0,0 +1,300 @@
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+# implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# This file is execfile()d with the current directory set to its
+# containing dir.
+#
+# Note that not all possible configuration values are present in this
+# autogenerated file.
+#
+# All configuration values have a default; values that are commented out
+# serve to show the default.
+
+import os
+# import sys
+
+
+import openstackdocstheme
+
+# If extensions (or modules to document with autodoc) are in another directory,
+# add these directories to sys.path here. If the directory is relative to the
+# documentation root, use os.path.abspath to make it absolute, like shown here.
+# sys.path.insert(0, os.path.abspath('.'))
+
+# -- General configuration ------------------------------------------------
+
+# If your documentation needs a minimal Sphinx version, state it here.
+# needs_sphinx = '1.0'
+
+# Add any Sphinx extension module names here, as strings. They can be
+# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
+# ones.
+# TODO(ajaeger): enable PDF building, for example add 'rst2pdf.pdfbuilder'
+# extensions =
+
+# Add any paths that contain templates here, relative to this directory.
+# templates_path = ['_templates']
+
+# The suffix of source filenames.
+source_suffix = '.rst'
+
+# The encoding of source files.
+# source_encoding = 'utf-8-sig'
+
+# The master toctree document.
+master_doc = 'index'
+
+# General information about the project.
+project = u'Installation Guide for Telemetry Alarming Service'
+bug_tag = u'install-guide'
+copyright = u'2016, OpenStack contributors'
+
+# The version info for the project you're documenting, acts as replacement for
+# |version| and |release|, also used in various other places throughout the
+# built documents.
+#
+# The short X.Y version.
+version = '0.1'
+# The full version, including alpha/beta/rc tags.
+release = '0.1'
+
+# A few variables have to be set for the log-a-bug feature.
+#   giturl: The location of conf.py on Git. Must be set manually.
+#   gitsha: The SHA checksum of the bug description. Automatically extracted from git log.
+#   bug_tag: Tag for categorizing the bug. Must be set manually.
+# These variables are passed to the logabug code via html_context.
+giturl = u'http://git.openstack.org/cgit/openstack/aodh/tree/install-guide/source'
+git_cmd = "/usr/bin/git log | head -n1 | cut -f2 -d' '"
+gitsha = os.popen(git_cmd).read().strip('\n')
+html_context = {"gitsha": gitsha, "bug_tag": bug_tag,
+                "giturl": giturl,
+                "bug_project": "aodh"}
+
+# The language for content autogenerated by Sphinx. Refer to documentation
+# for a list of supported languages.
+# language = None
+
+# There are two options for replacing |today|: either, you set today to some
+# non-false value, then it is used:
+# today = ''
+# Else, today_fmt is used as the format for a strftime call.
+# today_fmt = '%B %d, %Y'
+
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+exclude_patterns = ["prereq-common.rst", "configure-common.rst"]
+
+# The reST default role (used for this markup: `text`) to use for all
+# documents.
+# default_role = None
+
+# If true, '()' will be appended to :func: etc. cross-reference text.
+# add_function_parentheses = True
+
+# If true, the current module name will be prepended to all description
+# unit titles (such as .. function::).
+# add_module_names = True
+
+# If true, sectionauthor and moduleauthor directives will be shown in the
+# output. They are ignored by default.
+# show_authors = False
+
+# The name of the Pygments (syntax highlighting) style to use.
+pygments_style = 'sphinx'
+
+# A list of ignored prefixes for module index sorting.
+# modindex_common_prefix = []
+
+# If true, keep warnings as "system message" paragraphs in the built documents.
+# keep_warnings = False
+
+
+# -- Options for HTML output ----------------------------------------------
+
+# The theme to use for HTML and HTML Help pages.  See the documentation for
+# a list of builtin themes.
+html_theme = 'openstackdocs'
+
+# Theme options are theme-specific and customize the look and feel of a theme
+# further.  For a list of options available for each theme, see the
+# documentation.
+# html_theme_options = {}
+
+# Add any paths that contain custom themes here, relative to this directory.
+html_theme_path = [openstackdocstheme.get_html_theme_path()]
+
+# The name for this set of Sphinx documents.  If None, it defaults to
+# "<project> v<release> documentation".
+# html_title = None
+
+# A shorter title for the navigation bar.  Default is the same as html_title.
+# html_short_title = None
+
+# The name of an image file (relative to this directory) to place at the top
+# of the sidebar.
+# html_logo = None
+
+# The name of an image file (within the static path) to use as favicon of the
+# docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32
+# pixels large.
+# html_favicon = None
+
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
+# html_static_path = []
+
+# Add any extra paths that contain custom files (such as robots.txt or
+# .htaccess) here, relative to this directory. These files are copied
+# directly to the root of the documentation.
+# html_extra_path = []
+
+# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
+# using the given strftime format.
+# So that we can enable "log-a-bug" links from each output HTML page, this
+# variable must be set to a format that includes year, month, day, hours and
+# minutes.
+html_last_updated_fmt = '%Y-%m-%d %H:%M'
+
+
+# If true, SmartyPants will be used to convert quotes and dashes to
+# typographically correct entities.
+# html_use_smartypants = True
+
+# Custom sidebar templates, maps document names to template names.
+# html_sidebars = {}
+
+# Additional templates that should be rendered to pages, maps page names to
+# template names.
+# html_additional_pages = {}
+
+# If false, no module index is generated.
+# html_domain_indices = True
+
+# If false, no index is generated.
+html_use_index = False
+
+# If true, the index is split into individual pages for each letter.
+# html_split_index = False
+
+# If true, links to the reST sources are added to the pages.
+html_show_sourcelink = False
+
+# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
+# html_show_sphinx = True
+
+# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
+# html_show_copyright = True
+
+# If true, an OpenSearch description file will be output, and all pages will
+# contain a <link> tag referring to it.  The value of this option must be the
+# base URL from which the finished HTML is served.
+# html_use_opensearch = ''
+
+# This is the file name suffix for HTML files (e.g. ".xhtml").
+# html_file_suffix = None
+
+# Output file base name for HTML help builder.
+htmlhelp_basename = 'install-guide'
+
+# If true, publish source files
+html_copy_source = False
+
+# -- Options for LaTeX output ---------------------------------------------
+
+latex_elements = {
+    # The paper size ('letterpaper' or 'a4paper').
+    # 'papersize': 'letterpaper',
+
+    # The font size ('10pt', '11pt' or '12pt').
+    # 'pointsize': '10pt',
+
+    # Additional stuff for the LaTeX preamble.
+    # 'preamble': '',
+}
+
+# Grouping the document tree into LaTeX files. List of tuples
+# (source start file, target name, title,
+#  author, documentclass [howto, manual, or own class]).
+latex_documents = [
+    ('index', 'InstallGuide.tex', u'Install Guide',
+     u'OpenStack contributors', 'manual'),
+]
+
+# The name of an image file (relative to this directory) to place at the top of
+# the title page.
+# latex_logo = None
+
+# For "manual" documents, if this is true, then toplevel headings are parts,
+# not chapters.
+# latex_use_parts = False
+
+# If true, show page references after internal links.
+# latex_show_pagerefs = False
+
+# If true, show URL addresses after external links.
+# latex_show_urls = False
+
+# Documents to append as an appendix to all manuals.
+# latex_appendices = []
+
+# If false, no module index is generated.
+# latex_domain_indices = True
+
+
+# -- Options for manual page output ---------------------------------------
+
+# One entry per manual page. List of tuples
+# (source start file, name, description, authors, manual section).
+man_pages = [
+    ('index', 'installguide', u'Install Guide',
+     [u'OpenStack contributors'], 1)
+]
+
+# If true, show URL addresses after external links.
+# man_show_urls = False
+
+
+# -- Options for Texinfo output -------------------------------------------
+
+# Grouping the document tree into Texinfo files. List of tuples
+# (source start file, target name, title, author,
+#  dir menu entry, description, category)
+texinfo_documents = [
+    ('index', 'InstallGuide', u'Install Guide',
+     u'OpenStack contributors', 'InstallGuide',
+     'This guide shows OpenStack end users how to install '
+     'an OpenStack cloud.', 'Miscellaneous'),
+]
+
+# Documents to append as an appendix to all manuals.
+# texinfo_appendices = []
+
+# If false, no module index is generated.
+# texinfo_domain_indices = True
+
+# How to display URL addresses: 'footnote', 'no', or 'inline'.
+# texinfo_show_urls = 'footnote'
+
+# If true, do not generate a @detailmenu in the "Top" node's menu.
+# texinfo_no_detailmenu = False
+
+# -- Options for Internationalization output ------------------------------
+locale_dirs = ['locale/']
+
+# -- Options for PDF output --------------------------------------------------
+
+pdf_documents = [
+    ('index', u'InstallGuide', u'Install Guide',
+     u'OpenStack contributors')
+]
diff --git a/install-guide/source/configure-common.rst b/install-guide/source/configure-common.rst
new file mode 100644
index 00000000..b567b9c1
--- /dev/null
+++ b/install-guide/source/configure-common.rst
@@ -0,0 +1,86 @@
+2. Edit the ``/etc/aodh/aodh.conf`` file and complete the following actions:
+
+   * In the ``[database]`` section, configure database access:
+
+     .. code-block:: ini
+
+        [database]
+        ...
+        connection = mysql+pymysql://aodh:AODH_DBPASS@controller/aodh
+
+     Replace ``AODH_DBPASS`` with the password you chose for the
+     Telemetry Alarming module database. You must escape special characters
+     such as ':', '/', '+', and '@' in the connection string in accordance
+     with `RFC2396 <https://www.ietf.org/rfc/rfc2396.txt>`_.
+
+   * In the ``[DEFAULT]`` and ``[oslo_messaging_rabbit]`` sections,
+     configure ``RabbitMQ`` message queue access:
+
+     .. code-block:: ini
+
+        [DEFAULT]
+        ...
+        rpc_backend = rabbit
+
+        [oslo_messaging_rabbit]
+        ...
+        rabbit_host = controller
+        rabbit_userid = openstack
+        rabbit_password = RABBIT_PASS
+
+     Replace ``RABBIT_PASS`` with the password you chose for the
+     ``openstack`` account in ``RabbitMQ``.
+
+   * In the ``[DEFAULT]`` and ``[keystone_authtoken]`` sections,
+     configure Identity service access:
+
+     .. code-block:: ini
+
+        [DEFAULT]
+        ...
+        auth_strategy = keystone
+
+        [keystone_authtoken]
+        ...
+        auth_uri = http://controller:5000
+        auth_url = http://controller:35357
+        memcached_servers = controller:11211
+        auth_type = password
+        project_domain_name = default
+        user_domain_name = default
+        project_name = service
+        username = aodh
+        password = AODH_PASS
+
+     Replace ``AODH_PASS`` with the password you chose for
+     the ``aodh`` user in the Identity service.
+
+   * In the ``[service_credentials]`` section, configure service credentials:
+
+     .. code-block:: ini
+
+        [service_credentials]
+        ...
+        auth_type = password
+        auth_url = http://controller:5000/v3
+        project_domain_name = default
+        user_domain_name = default
+        project_name = service
+        username = aodh
+        password = AODH_PASS
+        interface = internalURL
+        region_name = RegionOne
+
+     Replace ``AODH_PASS`` with the password you chose for
+     the ``aodh`` user in the Identity service.
+
+.. todo:
+
+   Workaround for https://bugs.launchpad.net/ubuntu/+source/aodh/+bug/1513599.
+
+3. In order to initialize the database please run the ``aodh-dbsync`` script.
+
+.. note::
+
+   The ``aodh-dbsync`` script is only necessary if you are using an SQL
+   database.
diff --git a/install-guide/source/get_started.rst b/install-guide/source/get_started.rst
new file mode 100644
index 00000000..6361d1bd
--- /dev/null
+++ b/install-guide/source/get_started.rst
@@ -0,0 +1,28 @@
+===================================
+Telemetry Alarming service overview
+===================================
+
+The Telemetry Alarming services trigger alarms when the collected metering
+or event data break the defined rules.
+
+The Telemetry Alarming service consists of the following components:
+
+An API server (``aodh-api``)
+  Runs on one or more central management servers to provide access
+  to the alarm information stored in the data store.
+
+An alarm evaluator (``aodh-evaluator``)
+  Runs on one or more central management servers to determine when
+  alarms fire due to the associated statistic trend crossing a
+  threshold over a sliding time window.
+
+A notification listener (``aodh-listener``)
+  Runs on a central management server and determines when to fire alarms.
+  The alarms are generated based on defined rules against events, which are
+  captured by the Telemetry Data Collection service's notification agents.
+
+An alarm notifier (``aodh-notifier``)
+  Runs on one or more central management servers to allow alarms to be
+  set based on the threshold evaluation for a collection of samples.
+
+These services communicate by using the OpenStack messaging bus.
diff --git a/install-guide/source/index.rst b/install-guide/source/index.rst
new file mode 100644
index 00000000..cecad15c
--- /dev/null
+++ b/install-guide/source/index.rst
@@ -0,0 +1,15 @@
+==========================
+Telemetry Alarming service
+==========================
+
+.. toctree::
+
+   get_started.rst
+   install-obs.rst
+   install-rdo.rst
+   install-ubuntu.rst
+   verify.rst
+   next-steps.rst
+
+This chapter assumes a working setup of OpenStack following the base
+Installation Guide.
diff --git a/install-guide/source/install-obs.rst b/install-guide/source/install-obs.rst
new file mode 100644
index 00000000..0575593d
--- /dev/null
+++ b/install-guide/source/install-obs.rst
@@ -0,0 +1,51 @@
+.. _install-obs:
+
+Install and configure for openSUSE and SUSE Linux Enterprise
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+This section describes how to install and configure the
+Telemetry Alarming service, code-named aodh, on the controller node.
+
+This section assumes that you already have a working OpenStack
+environment with at least the following components installed:
+Compute, Image Service, Identity.
+
+.. include:: prereq-common.rst
+
+Install and configure components
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. note::
+
+   Default configuration files vary by distribution. You might need to add
+   these sections and options rather than modifying existing sections and
+   options. Also, an ellipsis (...) in the configuration snippets indicates
+   potential default configuration options that you should retain.
+
+1. Install the packages:
+
+   .. code-block:: console
+
+      # zypper install openstack-aodh-api \
+        openstack-aodh-evaluator openstack-aodh-notifier \
+        openstack-aodh-listener openstack-aodh-expirer \
+        python-aodhclient
+
+.. include:: configure-common.rst
+
+Finalize installation
+~~~~~~~~~~~~~~~~~~~~~
+
+#. Start the Telemetry Alarming services and configure them to start
+   when the system boots:
+
+   .. code-block:: console
+
+      # systemctl enable openstack-aodh-api.service \
+        openstack-aodh-evaluator.service \
+        openstack-aodh-notifier.service \
+        openstack-aodh-listener.service
+      # systemctl start openstack-aodh-api.service \
+        openstack-aodh-evaluator.service \
+        openstack-aodh-notifier.service \
+        openstack-aodh-listener.service
diff --git a/install-guide/source/install-rdo.rst b/install-guide/source/install-rdo.rst
new file mode 100644
index 00000000..b4eb6757
--- /dev/null
+++ b/install-guide/source/install-rdo.rst
@@ -0,0 +1,51 @@
+.. _install-rdo:
+
+Install and configure for Red Hat Enterprise Linux and CentOS
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+This section describes how to install and configure the
+Telemetry Alarming service, code-named aodh, on the controller node.
+
+This section assumes that you already have a working OpenStack
+environment with at least the following components installed:
+Compute, Image Service, Identity.
+
+.. include:: prereq-common.rst
+
+Install and configure components
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. note::
+
+   Default configuration files vary by distribution. You might need to add
+   these sections and options rather than modifying existing sections and
+   options. Also, an ellipsis (...) in the configuration snippets indicates
+   potential default configuration options that you should retain.
+
+1. Install the packages:
+
+   .. code-block:: console
+
+      # yum install openstack-aodh-api \
+        openstack-aodh-evaluator openstack-aodh-notifier \
+        openstack-aodh-listener openstack-aodh-expirer \
+        python-aodhclient
+
+.. include:: configure-common.rst
+
+Finalize installation
+~~~~~~~~~~~~~~~~~~~~~
+
+#. Start the Telemetry Alarming services and configure them to start
+   when the system boots:
+
+   .. code-block:: console
+
+      # systemctl enable openstack-aodh-api.service \
+        openstack-aodh-evaluator.service \
+        openstack-aodh-notifier.service \
+        openstack-aodh-listener.service
+      # systemctl start openstack-aodh-api.service \
+        openstack-aodh-evaluator.service \
+        openstack-aodh-notifier.service \
+        openstack-aodh-listener.service
diff --git a/install-guide/source/install-ubuntu.rst b/install-guide/source/install-ubuntu.rst
new file mode 100644
index 00000000..0d346fbd
--- /dev/null
+++ b/install-guide/source/install-ubuntu.rst
@@ -0,0 +1,53 @@
+.. _install-ubuntu:
+
+Install and configure for Ubuntu
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+This section describes how to install and configure the
+Telemetry Alarming service, code-named aodh, on the controller node.
+
+This section assumes that you already have a working OpenStack
+environment with at least the following components installed:
+Compute, Image Service, Identity.
+
+.. include:: prereq-common.rst
+
+Install and configure components
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. note::
+
+   Default configuration files vary by distribution. You might need to add
+   these sections and options rather than modifying existing sections and
+   options. Also, an ellipsis (...) in the configuration snippets indicates
+   potential default configuration options that you should retain.
+
+1. Install the packages:
+
+   .. code-block:: console
+
+      # apt-get install aodh-api aodh-evaluator aodh-notifier \
+        aodh-listener aodh-expirer python-aodhclient
+
+.. include:: configure-common.rst
+
+3. Edit the ``/etc/aodh/api_paste.ini`` file and modify the
+   ``[filter:authtoken]`` section as follows:
+
+   .. code-block:: ini
+
+      [filter:authtoken]
+      ...
+      oslo_config_project = aodh
+
+Finalize installation
+~~~~~~~~~~~~~~~~~~~~~
+
+#. Restart the Alarming services:
+
+   .. code-block:: console
+
+      # service aodh-api restart
+      # service aodh-evaluator restart
+      # service aodh-notifier restart
+      # service aodh-listener restart
diff --git a/install-guide/source/next-steps.rst b/install-guide/source/next-steps.rst
new file mode 100644
index 00000000..82f065f6
--- /dev/null
+++ b/install-guide/source/next-steps.rst
@@ -0,0 +1,9 @@
+.. _next-steps:
+
+Next steps
+~~~~~~~~~~
+
+Your OpenStack environment now includes the aodh service.
+
+To add additional services, see
+docs.openstack.org/draft/install-guides/index.html .
diff --git a/install-guide/source/prereq-common.rst b/install-guide/source/prereq-common.rst
new file mode 100644
index 00000000..3d1c1cbe
--- /dev/null
+++ b/install-guide/source/prereq-common.rst
@@ -0,0 +1,137 @@
+Prerequisites
+-------------
+
+Before you install and configure the Telemetry service, you must create a
+database, service credentials, and API endpoints.
+
+#. To create the database, complete these steps:
+
+   * Use the database access client to connect to
+     the database server as the ``root`` user:
+
+     .. code-block:: console
+
+        $ mysql -u root -p
+
+   * Create the ``aodh`` database:
+
+     .. code-block:: console
+
+        CREATE DATABASE aodh;
+
+   * Grant proper access to the ``aodh`` database:
+
+     .. code-block:: console
+
+        GRANT ALL PRIVILEGES ON aodh.* TO 'aodh'@'localhost' \
+          IDENTIFIED BY 'AODH_DBPASS';
+        GRANT ALL PRIVILEGES ON aodh.* TO 'aodh'@'%' \
+          IDENTIFIED BY 'AODH_DBPASS';
+
+     Replace ``AODH_DBPASS`` with a suitable password.
+
+   * Exit the database access client.
+
+#. Source the ``admin`` credentials to gain access to admin-only
+   CLI commands:
+
+   .. code-block:: console
+
+      $ . admin-openrc
+
+#. To create the service credentials, complete these steps:
+
+   * Create the ``aodh`` user:
+
+     .. code-block:: console
+
+        $ openstack user create --domain default \
+          --password-prompt aodh
+        User Password:
+        Repeat User Password:
+        +-----------+----------------------------------+
+        | Field     | Value                            |
+        +-----------+----------------------------------+
+        | domain_id | e0353a670a9e496da891347c589539e9 |
+        | enabled   | True                             |
+        | id        | b7657c9ea07a4556aef5d34cf70713a3 |
+        | name      | aodh                             |
+        +-----------+----------------------------------+
+
+   * Add the ``admin`` role to the ``aodh`` user:
+
+     .. code-block:: console
+
+        $ openstack role add --project service --user aodh admin
+
+     .. note::
+
+        This command provides no output.
+
+   * Create the ``aodh`` service entity:
+
+     .. code-block:: console
+
+        $ openstack service create --name aodh \
+          --description "Telemetry" alarming
+        +-------------+----------------------------------+
+        | Field       | Value                            |
+        +-------------+----------------------------------+
+        | description | Telemetry                        |
+        | enabled     | True                             |
+        | id          | 3405453b14da441ebb258edfeba96d83 |
+        | name        | aodh                             |
+        | type        | alarming                         |
+        +-------------+----------------------------------+
+
+#. Create the Alarming service API endpoints:
+
+   .. code-block:: console
+
+      $ openstack endpoint create --region RegionOne \
+        alarming public http://controller:8042
+        +--------------+----------------------------------+
+        | Field        | Value                            |
+        +--------------+----------------------------------+
+        | enabled      | True                             |
+        | id           | 340be3625e9b4239a6415d034e98aace |
+        | interface    | public                           |
+        | region       | RegionOne                        |
+        | region_id    | RegionOne                        |
+        | service_id   | 8c2c7f1b9b5049ea9e63757b5533e6d2 |
+        | service_name | aodh                             |
+        | service_type | alarming                         |
+        | url          | http://controller:8042           |
+        +--------------+----------------------------------+
+
+      $ openstack endpoint create --region RegionOne \
+        alarming internal http://controller:8042
+        +--------------+----------------------------------+
+        | Field        | Value                            |
+        +--------------+----------------------------------+
+        | enabled      | True                             |
+        | id           | 340be3625e9b4239a6415d034e98aace |
+        | interface    | internal                         |
+        | region       | RegionOne                        |
+        | region_id    | RegionOne                        |
+        | service_id   | 8c2c7f1b9b5049ea9e63757b5533e6d2 |
+        | service_name | aodh                             |
+        | service_type | alarming                         |
+        | url          | http://controller:8042           |
+        +--------------+----------------------------------+
+
+      $ openstack endpoint create --region RegionOne \
+        alarming admin http://controller:8042
+        +--------------+----------------------------------+
+        | Field        | Value                            |
+        +--------------+----------------------------------+
+        | enabled      | True                             |
+        | id           | 340be3625e9b4239a6415d034e98aace |
+        | interface    | admin                            |
+        | region       | RegionOne                        |
+        | region_id    | RegionOne                        |
+        | service_id   | 8c2c7f1b9b5049ea9e63757b5533e6d2 |
+        | service_name | aodh                             |
+        | service_type | alarming                         |
+        | url          | http://controller:8042           |
+        +--------------+----------------------------------+
diff --git a/install-guide/source/verify.rst b/install-guide/source/verify.rst
new file mode 100644
index 00000000..c8d00c31
--- /dev/null
+++ b/install-guide/source/verify.rst
@@ -0,0 +1,8 @@
+.. _verify:
+
+Verify operation
+~~~~~~~~~~~~~~~~
+
+Verify operation of the Telemetry Alarming service.
+
+TBD
diff --git a/setup.cfg b/setup.cfg
index d62838c0..af9e7556 100644
--- a/setup.cfg
+++ b/setup.cfg
@@ -56,6 +56,7 @@ doc =
     sphinx!=1.2.0,!=1.3b1,<1.3,>=1.1.2
     sphinxcontrib-httpdomain
     sphinxcontrib-pecanwsme>=0.8
+    openstackdocstheme>=1.0.3  # Apache-2.0
 
 test =
     pifpaf>=0.1.0
diff --git a/tox.ini b/tox.ini
index 0ade3a6e..853cd99d 100644
--- a/tox.ini
+++ b/tox.ini
@@ -71,6 +71,10 @@ commands =
 deps = .[doc]
 commands = sphinx-build -a -E -d releasenotes/build/doctrees -b html releasenotes/source releasenotes/build/html
 
+[testenv:install-guide]
+deps = .[doc]
+commands = sphinx-build -a -E -W -d install-guide/build/doctrees -b html install-guide/source install-guide/build/html
+
 [testenv:genconfig]
 commands = oslo-config-generator --config-file=etc/aodh/aodh-config-generator.conf
 
@@ -104,7 +108,7 @@ commands = pifpaf -g AODH_TEST_STORAGE_URL run postgresql -- oslo_debug_helper {
 
 [flake8]
 ignore =
-exclude=.venv,.git,.tox,dist,doc,./aodh/openstack/common,*lib/python*,*egg,build
+exclude=.venv,.git,.tox,dist,doc,./aodh/openstack/common,*lib/python*,*egg,build,install-guide
 show-source = True
 
 [hacking]