diff --git a/userdocs/release-notes/fuel_known_issues.rst b/userdocs/release-notes/fuel_known_issues.rst
index ca8dc3fdd..069ec3a15 100644
--- a/userdocs/release-notes/fuel_known_issues.rst
+++ b/userdocs/release-notes/fuel_known_issues.rst
@@ -2,4 +2,123 @@
 Known Issues
 ============
 
-This section lists known issues in this release:
\ No newline at end of file
+This section lists known issues in this release:
+
+* Disk partitioning on controllers does not automatically reset back
+  to the default state if you change the Glance backend.
+  See `LP1450100 <https://bugs.launchpad.net/bugs/1450100>`_.
+
+* No option to connect to a remote repository via HTTP Proxy without
+  building a local mirror.
+  See `LP1460169 <https://bugs.launchpad.net/bugs/1460169>`_.
+
+* Default disk allocation may not use entire disk space.
+  To prevent this, before deploying, check that you do not
+  have unallocated disk space by going to :guilabel:`Nodes`, selecting
+  a node and clicking :guilabel:`Configure Disks`.
+  See `LP1490597 <https://bugs.launchpad.net/bugs/1490597>`_.
+
+* A system with CentOS-7.2 and e1000 network interface may become temporarily
+  unresponsive with the system log entries similar to the following ones:
+  
+   .. code-block:: console
+
+      [ 2045.553869] e1000 0000:00:03.0 enp0s3: Detected Tx Unit Hang
+      [ 2045.553869] Tx Queue <0>
+      [ 2045.553869] TDH <3>
+      [ 2045.553869] TDT <3>
+      [ 2045.553869] next_to_use <de>
+      [ 2045.553869] next_to_clean <3>
+      [ 2045.553869] buffer_info[next_to_clean]
+      [ 2045.553869] time_stamp <1001a8c59>
+      [ 2045.553869] next_to_watch <16>
+      [ 2045.553869] jiffies <1001aa291>
+      [ 2045.553869] next_to_watch.status <0>
+      [ 2046.720054] ------------[ cut here ]------------
+      [ 2046.720084] WARNING: at net/sched/sch_generic.c:297
+      dev_watchdog+0x270/0x280()
+      [ 2046.720100] NETDEV WATCHDOG: enp0s3 (e1000): transmit queue 0 timed out
+      [ 2046.720104] Modules linked in: loop xt_CHECKSUM iptable_mangle nf_log_ipv4
+      nf_log_common xt_LOG xt_limit ipt_MASQUERADE nf_nat_masque
+      [ 2046.721693] CPU: 0 PID: 0 Comm: swapper/0 Not tainted
+      3.10.0-327.3.1.el7.x86_64 #1
+      [ 2046.721693] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
+      BIOS 1.7.5-20151012_155810-obs-1 04/01/2014
+      [ 2046.721693] ffff88007fc03d88 76f0075ca754d7b4 ffff88007fc03d40 ffffffff8163516c
+      [ 2046.721693] ffff88007fc03d78 ffffffff8107b200 0000000000000000 ffff88007a352000
+      [ 2046.721693] ffff88007878ac80 0000000000000001 0000000000000000 ffff88007fc03de0
+      [ 2046.721693] Call Trace:
+      [ 2046.721693] <IRQ> [<ffffffff8163516c>] dump_stack+0x19/0x1b
+      [ 2046.721693] [<ffffffff8107b200>] warn_slowpath_common+0x70/0xb0
+      [ 2046.721693] [<ffffffff8107b29c>] warn_slowpath_fmt+0x5c/0x80
+      [ 2046.721693] [<ffffffff8154ca50>] dev_watchdog+0x270/0x280
+      [ 2046.721693] [<ffffffff8154c7e0>] ? dev_graft_qdisc+0x80/0x80
+      [ 2046.721693] [<ffffffff8108b0a6>] call_timer_fn+0x36/0x110
+      [ 2046.721693] [<ffffffff8154c7e0>] ? dev_graft_qdisc+0x80/0x80
+      [ 2046.721693] [<ffffffff8108dd97>] run_timer_softirq+0x237/0x340
+      [ 2046.721693] [<ffffffff81084b0f>] __do_softirq+0xef/0x280
+      [ 2046.721693] [<ffffffff816471dc>] call_softirq+0x1c/0x30
+      [ 2046.721693] [<ffffffff81016fc5>] do_softirq+0x65/0xa0
+      [ 2046.721693] [<ffffffff81084ea5>] irq_exit+0x115/0x120
+      [ 2046.721693] [<ffffffff81647e55>] smp_apic_timer_interrupt+0x45/0x60
+      [ 2046.721693] [<ffffffff8164651d>] apic_timer_interrupt+0x6d/0x80
+
+
+  The issue is with both hardware and virtual e1000 network interface.
+  The time during which the system is unresponsive is less than a minute.
+  The cause of the issue is network interface restart.
+  System logs 
+  This is a known e1000 driver issue with various distributions: CentOS,
+  Ubuntu, RHEL.
+  See `LP1526544 <https://bugs.launchpad.net/bugs/1526544>`_.
+
+  **Solutions:**
+
+  * Use "virtio" driver: To work around the issue with the virtual interface,
+    use the "virtio" driver. This solution may have limitations
+    -- for example, bonding interface does not work with "virtio".
+    Please check if this workaround is compatible with your use case.
+
+  * Disable TSO offloading -- run-time only: Disable the setting in run-time
+    with the command:
+
+     .. code-block:: console
+
+        ethtool -K <ifname> tso off
+
+  * Disable TSO offloading -- persistent change: To make the change persistent,
+    create a script that will set this option on every 'ifup':
+
+     #. Create an empty file:
+
+        .. code-block:: console
+
+           touch /sbin/ifup-local
+
+      #. Make the file executable:
+
+         .. code-block:: console
+
+            chmod +x /sbin/ifup-local
+
+      #. Put the following lines into the file:
+
+         .. code-block:: console
+
+            #!/bin/bash
+            if [[ -z "${1}" ]]; then
+              exit
+            fi
+            devpath=$(readlink -m /sys/class/net/${1})
+            if [[ "${devpath}" == /sys/devices/virtual/* ]]; then
+              exit
+            fi
+            ethtool -K ${1} tso off
+
+* Deployment with enabled SR-IOV fails on some hardware with
+  the "sriov_iommu_check" entry in the log.
+  This is a known issue with Linux kernel and some hardware platforms.
+  See `LP1556854 <https://bugs.launchpad.net/bugs/1556854>`_.
+
+* For performance reasons, integration of S3 API/Keystone is disabled by
+  default. See `LP1446704 <https://bugs.launchpad.net/fuel/+bug/1446704>`_.
\ No newline at end of file