--- # You can use this file to override _any_ variable throughout Kolla. # Additional options can be found in the # 'kolla-ansible/ansible/group_vars/all.yml' file. Default value of all the # commented parameters are shown here, To override the default value uncomment # the parameter and change its value. ############### # Kolla options ############### # Valid options are [ COPY_ONCE, COPY_ALWAYS ] #config_strategy: "COPY_ALWAYS" # Valid options are ['centos', 'debian', 'oraclelinux', 'rhel', 'ubuntu'] #kolla_base_distro: "centos" # Valid options are [ binary, source ] #kolla_install_type: "binary" # Valid option is Docker repository tag #openstack_release: "" # Location of configuration overrides #node_custom_config: "/etc/kolla/config" # This should be a VIP, an unused IP on your network that will float between # the hosts running keepalived for high-availability. If you want to run an # All-In-One without haproxy and keepalived, you can set enable_haproxy to no # in "OpenStack options" section, and set this value to the IP of your # 'network_interface' as set in the Networking section below. kolla_internal_vip_address: "10.10.10.254" # This is the DNS name that maps to the kolla_internal_vip_address VIP. By # default it is the same as kolla_internal_vip_address. #kolla_internal_fqdn: "{{ kolla_internal_vip_address }}" # This should be a VIP, an unused IP on your network that will float between # the hosts running keepalived for high-availability. It defaults to the # kolla_internal_vip_address, allowing internal and external communication to # share the same address. Specify a kolla_external_vip_address to separate # internal and external requests between two VIPs. #kolla_external_vip_address: "{{ kolla_internal_vip_address }}" # The Public address used to communicate with OpenStack as set in the public_url # for the endpoints that will be created. This DNS name should map to # kolla_external_vip_address. #kolla_external_fqdn: "{{ kolla_external_vip_address }}" ################ # Docker options ################ # Below is an example of a private repository with authentication. Note the # Docker registry password can also be set in the passwords.yml file. #docker_registry: "172.16.0.10:4000" #docker_namespace: "companyname" #docker_registry_username: "sam" #docker_registry_password: "correcthorsebatterystaple" ################### # Messaging options ################### # Below is an example of an separate backend that provides brokerless # messaging for oslo.messaging RPC communications #om_rpc_transport: "amqp" #om_rpc_user: "{{ qdrouterd_user }}" #om_rpc_password: "{{ qdrouterd_password }}" #om_rpc_port: "{{ qdrouterd_port }}" #om_rpc_group: "qdrouterd" ############################## # Neutron - Networking Options ############################## # This interface is what all your api services will be bound to by default. # Additionally, all vxlan/tunnel and storage network traffic will go over this # interface by default. This interface must contain an IPv4 address. # It is possible for hosts to have non-matching names of interfaces - these can # be set in an inventory file per host or per group or stored separately, see # http://docs.ansible.com/ansible/intro_inventory.html # Yet another way to workaround the naming problem is to create a bond for the # interface on all hosts and give the bond name here. Similar strategy can be # followed for other types of interfaces. #network_interface: "eth0" # These can be adjusted for even more customization. The default is the same as # the 'network_interface'. These interfaces must contain an IPv4 address. #kolla_external_vip_interface: "{{ network_interface }}" #api_interface: "{{ network_interface }}" #storage_interface: "{{ network_interface }}" #cluster_interface: "{{ network_interface }}" #tunnel_interface: "{{ network_interface }}" #dns_interface: "{{ network_interface }}" # This is the raw interface given to neutron as its external network port. Even # though an IP address can exist on this interface, it will be unusable in most # configurations. It is recommended this interface not be configured with any IP # addresses for that reason. #neutron_external_interface: "eth1" # Valid options are [ openvswitch, linuxbridge, vmware_nsxv, vmware_dvs, opendaylight ] #neutron_plugin_agent: "openvswitch" #################### # keepalived options #################### # Arbitrary unique number from 0..255 #keepalived_virtual_router_id: "51" ############# # TLS options ############# # To provide encryption and authentication on the kolla_external_vip_interface, # TLS can be enabled. When TLS is enabled, certificates must be provided to # allow clients to perform authentication. #kolla_enable_tls_external: "no" #kolla_external_fqdn_cert: "{{ node_config_directory }}/certificates/haproxy.pem" ############## # OpenDaylight ############## #enable_opendaylight_qos: "no" #enable_opendaylight_l3: "yes" ################### # OpenStack options ################### # Use these options to set the various log levels across all OpenStack projects # Valid options are [ True, False ] #openstack_logging_debug: "False" # Valid options are [ none, novnc, spice, rdp ] #nova_console: "novnc" # OpenStack services can be enabled or disabled with these options #enable_aodh: "no" #enable_barbican: "no" #enable_blazar: "no" #enable_ceilometer: "no" #enable_central_logging: "no" #enable_ceph: "no" #enable_ceph_mds: "no" #enable_ceph_rgw: "no" #enable_ceph_nfs: "no" #enable_chrony: "no" #enable_cinder: "no" #enable_cinder_backup: "yes" #enable_cinder_backend_hnas_iscsi: "no" #enable_cinder_backend_hnas_nfs: "no" #enable_cinder_backend_iscsi: "no" #enable_cinder_backend_lvm: "no" #enable_cinder_backend_nfs: "no" #enable_cloudkitty: "no" #enable_collectd: "no" #enable_congress: "no" #enable_designate: "no" #enable_destroy_images: "no" #enable_etcd: "no" #enable_fluentd: "yes" #enable_freezer: "no" #enable_gnocchi: "no" #enable_grafana: "no" #enable_haproxy: "yes" #enable_heat: "yes" #enable_horizon: "yes" #enable_horizon_cloudkitty: "{{ enable_cloudkitty | bool }}" #enable_horizon_designate: "{{ enable_designate | bool }}" #enable_horizon_freezer: "{{ enable_freezer | bool }}" #enable_horizon_ironic: "{{ enable_ironic | bool }}" #enable_horizon_karbor: "{{ enable_karbor | bool }}" #enable_horizon_magnum: "{{ enable_magnum | bool }}" #enable_horizon_manila: "{{ enable_manila | bool }}" #enable_horizon_mistral: "{{ enable_mistral | bool }}" #enable_horizon_murano: "{{ enable_murano | bool }}" #enable_horizon_neutron_lbaas: "{{ enable_neutron_lbaas | bool }}" #enable_horizon_sahara: "{{ enable_sahara | bool }}" #enable_horizon_searchlight: "{{ enable_searchlight | bool }}" #enable_horizon_senlin: "{{ enable_senlin | bool }}" #enable_horizon_solum: "{{ enable_solum | bool }}" #enable_horizon_tacker: "{{ enable_tacker | bool }}" #enable_horizon_trove: "{{ enable_trove | bool }}" #enable_horizon_watcher: "{{ enable_watcher | bool }}" #enable_horizon_zun: "{{ enable_zun | bool }}" #enable_hyperv: "no" #enable_influxdb: "no" #enable_ironic: "no" #enable_ironic_pxe_uefi: "no" #enable_karbor: "no" #enable_kuryr: "no" #enable_magnum: "no" #enable_manila: "no" #enable_manila_backend_generic: "no" #enable_manila_backend_hnas: "no" #enable_manila_backend_cephfs_native: "no" #enable_manila_backend_cephfs_nfs: "no" #enable_mistral: "no" #enable_mongodb: "no" #enable_murano: "no" #enable_multipathd: "no" #enable_neutron_bgp_dragent: "no" #enable_neutron_dvr: "no" #enable_neutron_lbaas: "no" #enable_neutron_fwaas: "no" #enable_neutron_qos: "no" #enable_neutron_agent_ha: "no" #enable_neutron_vpnaas: "no" #enable_neutron_sriov: "no" #enable_neutron_sfc: "no" #enable_nova_fake: "no" #enable_nova_serialconsole_proxy: "no" #enable_octavia: "no" #enable_opendaylight: "no" #enable_openvswitch: "{{ neutron_plugin_agent != 'linuxbridge' }}" #enable_ovs_dpdk: "no" #enable_osprofiler: "no" #enable_panko: "no" #enable_qdrouterd: "no" #enable_rally: "no" #enable_redis: "no" #enable_sahara: "no" #enable_searchlight: "no" #enable_senlin: "no" #enable_skydive: "no" #enable_solum: "no" #enable_swift: "no" #enable_telegraf: "no" #enable_tacker: "no" #enable_tempest: "no" #enable_trove: "no" #enable_vitrage: "no" #enable_vmtp: "no" #enable_watcher: "no" #enable_zun: "no" ############## # Ceph options ############## # Ceph can be setup with a caching to improve performance. To use the cache you # must provide separate disks than those for the OSDs #ceph_enable_cache: "no" # Set to no if using external Ceph without cephx. #external_ceph_cephx_enabled: "yes" # Ceph is not able to determine the size of a cache pool automatically, # so the configuration on the absolute size is required here, otherwise the flush/evict will not work. #ceph_target_max_bytes: "" #ceph_target_max_objects: "" # Valid options are [ forward, none, writeback ] #ceph_cache_mode: "writeback" # A requirement for using the erasure-coded pools is you must setup a cache tier # Valid options are [ erasure, replicated ] #ceph_pool_type: "replicated" # Integrate ceph rados object gateway with openstack keystone #enable_ceph_rgw_keystone: "no" # Set the pgs and pgps for pool #ceph_pool_pg_num: 128 #ceph_pool_pgp_num: 128 ############################# # Keystone - Identity Options ############################# # Valid options are [ uuid, fernet ] #keystone_token_provider: 'uuid' # Interval to rotate fernet keys by (in seconds). Must be an interval of # 60(1 min), 120(2 min), 180(3 min), 240(4 min), 300(5 min), 360(6 min), # 600(10 min), 720(12 min), 900(15 min), 1200(20 min), 1800(30 min), # 3600(1 hour), 7200(2 hour), 10800(3 hour), 14400(4 hour), 21600(6 hour), # 28800(8 hour), 43200(12 hour), 86400(1 day), 604800(1 week). #fernet_token_expiry: 86400 ######################## # Glance - Image Options ######################## # Configure image backend. #glance_backend_file: "yes" #glance_backend_ceph: "no" #glance_backend_vmware: "no" #glance_backend_swift: "no" ################## # Barbican options ################## # Valid options are [ simple_crypto, p11_crypto ] #barbican_crypto_plugin: "simple_crypto" #barbican_library_path: "/usr/lib/libCryptoki2_64.so" ################ ## Panko options ################ # Valid options are [ mongodb, mysql ] #panko_database_type: "mysql" ################# # Gnocchi options ################# # Valid options are [ file, ceph ] #gnocchi_backend_storage: "{{ 'ceph' if enable_ceph|bool else 'file' }}" ################################ # Cinder - Block Storage Options ################################ # Enable / disable Cinder backends #cinder_backend_ceph: "{{ enable_ceph }}" #cinder_backend_vmwarevc_vmdk: "no" #cinder_volume_group: "cinder-volumes" # Valid options are [ nfs, swift, ceph ] #cinder_backup_driver: "ceph" #cinder_backup_share: "" #cinder_backup_mount_options_nfs: "" ################### # Designate options ################### # Valid options are [ bind9 ] #designate_backend: "bind9" #designate_ns_record: "sample.openstack.org" ######################## # Nova - Compute Options ######################## #nova_backend_ceph: "{{ enable_ceph }}" # Valid options are [ qemu, kvm, vmware, xenapi ] #nova_compute_virt_type: "kvm" # The number of fake driver per compute node #num_nova_fake_per_node: 5 ################# # Hyper-V options ################# # Hyper-V can be used as hypervisor #hyperv_username: "user" #hyperv_password: "password" #vswitch_name: "vswitch" # URL from which Nova Hyper-V MSI is downloaded #nova_msi_url: "https://www.cloudbase.it/downloads/HyperVNovaCompute_Beta.msi" ############################# # Horizon - Dashboard Options ############################# #horizon_backend_database: "{{ enable_murano | bool }}" ############################# # Ironic options ############################# #ironic_dnsmasq_dhcp_range: ###################################### # Manila - Shared File Systems Options ###################################### # HNAS backend configuration #hnas_ip: #hnas_user: #hnas_password: #hnas_evs_id: #hnas_evs_ip: #hnas_file_system_name: ################################ # Swift - Object Storage Options ################################ # Swift expects block devices to be available for storage. Two types of storage # are supported: 1 - storage device with a special partition name and filesystem # label, 2 - unpartitioned disk with a filesystem. The label of this filesystem # is used to detect the disk which Swift will be using. # Swift support two matching modes, valid options are [ prefix, strict ] #swift_devices_match_mode: "strict" # This parameter defines matching pattern: if "strict" mode was selected, # for swift_devices_match_mode then swift_device_name should specify the name of # the special swift partition for example: "KOLLA_SWIFT_DATA", if "prefix" mode was # selected then swift_devices_name should specify a pattern which would match to # filesystems' labels prepared for swift. #swift_devices_name: "KOLLA_SWIFT_DATA" ################################################ # Tempest - The OpenStack Integration Test Suite ################################################ # following value must be set when enable tempest tempest_image_id: tempest_flavor_ref_id: tempest_public_network_id: tempest_floating_network_name: # tempest_image_alt_id: "{{ tempest_image_id }}" # tempest_flavor_ref_alt_id: "{{ tempest_flavor_ref_id }}" ################################### # VMware - OpenStack VMware support ################################### #vmware_vcenter_host_ip: #vmware_vcenter_host_username: #vmware_vcenter_host_password: #vmware_datastore_name: #vmware_vcenter_name: #vmware_vcenter_cluster_name: ####################################### # XenAPI - Support XenAPI for XenServer ####################################### # XenAPI driver use HIMN(Host Internal Management Network) # to communicate with XenServer host. #xenserver_himn_ip: #xenserver_username: #xenserver_connect_protocol: