neutron/neutron/plugins/ml2/drivers/brocade/nos/nctemplates.py

253 lines
8.2 KiB
Python

# Copyright (c) 2014 Brocade Communications Systems, Inc.
# All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
#
# Authors:
# Varma Bhupatiraju (vbhupati@#brocade.com)
# Shiv Haris (sharis@brocade.com)
"""NOS NETCONF XML Configuration Command Templates.
Interface Configuration Commands
"""
# Get NOS Version
SHOW_FIRMWARE_VERSION = (
"show-firmware-version xmlns:nc="
"'urn:brocade.com:mgmt:brocade-firmware-ext'"
)
GET_VCS_DETAILS = (
'get-vcs-details xmlns:nc="urn:brocade.com:mgmt:brocade-vcs"'
)
SHOW_VIRTUAL_FABRIC = (
'show-virtual-fabric xmlns:nc="urn:brocade.com:mgmt:brocade-vcs"'
)
GET_VIRTUAL_FABRIC_INFO = (
'interface xmlns:nc="urn:brocade.com:mgmt:brocade-firmware-ext"'
)
NOS_VERSION = "./*/{urn:brocade.com:mgmt:brocade-firmware-ext}os-version"
VFAB_ENABLE = "./*/*/*/{urn:brocade.com:mgmt:brocade-vcs}vfab-enable"
# Create VLAN (vlan_id)
CREATE_VLAN_INTERFACE = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<interface-vlan xmlns="urn:brocade.com:mgmt:brocade-interface">
<interface>
<vlan>
<name>{vlan_id}</name>
</vlan>
</interface>
</interface-vlan>
</config>
"""
# Delete VLAN (vlan_id)
DELETE_VLAN_INTERFACE = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<interface-vlan xmlns="urn:brocade.com:mgmt:brocade-interface">
<interface>
<vlan operation="delete">
<name>{vlan_id}</name>
</vlan>
</interface>
</interface-vlan>
</config>
"""
#
# AMPP Life-cycle Management Configuration Commands
#
# Create AMPP port-profile (port_profile_name)
CREATE_PORT_PROFILE = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<port-profile xmlns="urn:brocade.com:mgmt:brocade-port-profile">
<name>{name}</name>
</port-profile>
</config>
"""
# Create VLAN sub-profile for port-profile (port_profile_name)
CREATE_VLAN_PROFILE_FOR_PORT_PROFILE = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<port-profile xmlns="urn:brocade.com:mgmt:brocade-port-profile">
<name>{name}</name>
<vlan-profile/>
</port-profile>
</config>
"""
# Configure L2 mode for VLAN sub-profile (port_profile_name)
CONFIGURE_L2_MODE_FOR_VLAN_PROFILE_IN_DOMAIN = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<port-profile xmlns="urn:brocade.com:mgmt:brocade-port-profile">
<name>{name}</name>
<vlan-profile>
<switchport-basic>
<basic/>
</switchport-basic>
</vlan-profile>
</port-profile>
</config>
"""
# Configure L2 mode for VLAN sub-profile (port_profile_name)
CONFIGURE_L2_MODE_FOR_VLAN_PROFILE = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<port-profile xmlns="urn:brocade.com:mgmt:brocade-port-profile">
<name>{name}</name>
<vlan-profile>
<switchport/>
</vlan-profile>
</port-profile>
</config>
"""
# Configure trunk mode for VLAN sub-profile (port_profile_name)
CONFIGURE_TRUNK_MODE_FOR_VLAN_PROFILE = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<port-profile xmlns="urn:brocade.com:mgmt:brocade-port-profile">
<name>{name}</name>
<vlan-profile>
<switchport>
<mode>
<vlan-mode>trunk</vlan-mode>
</mode>
</switchport>
</vlan-profile>
</port-profile>
</config>
"""
# Configure allowed VLANs for VLAN sub-profile
# (port_profile_name, allowed_vlan, native_vlan)
CONFIGURE_ALLOWED_VLANS_FOR_VLAN_PROFILE = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<port-profile xmlns="urn:brocade.com:mgmt:brocade-port-profile">
<name>{name}</name>
<vlan-profile>
<switchport>
<trunk>
<allowed>
<vlan>
<add>{vlan_id}</add>
</vlan>
</allowed>
</trunk>
</switchport>
</vlan-profile>
</port-profile>
</config>
"""
# Delete port-profile (port_profile_name)
DELETE_PORT_PROFILE = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<port-profile
xmlns="urn:brocade.com:mgmt:brocade-port-profile" operation="delete">
<name>{name}</name>
</port-profile>
</config>
"""
# Activate port-profile (port_profile_name)
ACTIVATE_PORT_PROFILE = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<port-profile-global xmlns="urn:brocade.com:mgmt:brocade-port-profile">
<port-profile>
<name>{name}</name>
<activate/>
</port-profile>
</port-profile-global>
</config>
"""
# Deactivate port-profile (port_profile_name)
DEACTIVATE_PORT_PROFILE = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<port-profile-global xmlns="urn:brocade.com:mgmt:brocade-port-profile">
<port-profile>
<name>{name}</name>
<activate
xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0" nc:operation="delete" />
</port-profile>
</port-profile-global>
</config>
"""
# Associate MAC address to port-profile (port_profile_name, mac_address)
ASSOCIATE_MAC_TO_PORT_PROFILE = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<port-profile-global xmlns="urn:brocade.com:mgmt:brocade-port-profile">
<port-profile>
<name>{name}</name>
<static>
<mac-address>{mac_address}</mac-address>
</static>
</port-profile>
</port-profile-global>
</config>
"""
# Dissociate MAC address from port-profile (port_profile_name, mac_address)
DISSOCIATE_MAC_FROM_PORT_PROFILE = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<port-profile-global xmlns="urn:brocade.com:mgmt:brocade-port-profile">
<port-profile>
<name>{name}</name>
<static
xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0" nc:operation="delete">
<mac-address>{mac_address}</mac-address>
</static>
</port-profile>
</port-profile-global>
</config>
"""
#port-profile domain management commands
REMOVE_PORTPROFILE_FROM_DOMAIN = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<port-profile-domain xmlns="urn:brocade.com:mgmt:brocade-port-profile">
<port-profile-domain-name>{domain_name}</port-profile-domain-name>
<profile operation="delete">
<profile-name>{name}</profile-name>
</profile>
</port-profile-domain>
</config>
"""
#put port profile in default domain
CONFIGURE_PORTPROFILE_IN_DOMAIN = """
<config xmlns:xc="urn:ietf:params:xml:ns:netconf:base:1.0">
<port-profile-domain xmlns="urn:brocade.com:mgmt:brocade-port-profile">
<port-profile-domain-name>{domain_name}</port-profile-domain-name>
<profile>
<profile-name>{name}</profile-name>
</profile>
</port-profile-domain>
</config>
"""
#
# Constants
#
# Port profile naming convention for Neutron networks
OS_PORT_PROFILE_NAME = "openstack-profile-{id}"
# Port profile filter expressions
PORT_PROFILE_XPATH_FILTER = "/port-profile"
PORT_PROFILE_NAME_XPATH_FILTER = "/port-profile[name='{name}']"