openstack
/
openstack-ansible
Code Issues Proposed changes

Remove references to eth10/eth11 container interfaces 

Neturon agents run on the hosts for several releases now so this
documentation is incorrect.

Change-Id: I546824a2b2e21a6473656a66a7fd4daf14eb191d
This commit is contained in:
Jonathan Rosser 2020-09-11 09:06:15 +01:00
parent 908d10a4a3
commit 3074ca61d7
3 changed files with 22 additions and 46 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
deploy-guide/source/targethosts-networkconfig.rst
View File

@ -74,13 +74,14 @@ Host network bridges information
* OpenStack Networking tunnel: ``br-vxlan``
The ``br-vxlan`` bridge is **required if** the environment is configured to
The ``br-vxlan`` interface is **required if** the environment is configured to
allow projects to create virtual networks using VXLAN.
It provides the interface for virtual (VXLAN) tunnel networks.
It provides the interface for encapsulated virtual (VXLAN) tunnel network traffic.
The bridge attaches to a physical or logical interface, typically a
``bond1`` VLAN subinterface. It also attaches to ``eth10`` in each
associated container.
Note that ``br-vxlan`` is not required to be a bridge at all, a physical interface
or a bond VLAN subinterface can be used directly and will be more efficient. The name
``br-vxlan`` is maintained here for consistency in the documentation and example
configurations.
The container network interface it attaches to is configurable in
the ``openstack_user_config.yml`` file.
@ -91,9 +92,8 @@ Host network bridges information
tagged or flat (no VLAN tag) networks.
The bridge attaches to a physical or logical interface, typically ``bond1``.
It attaches to ``eth11`` for VLAN type networks in each associated
container. It is not assigned an IP address because it handles only
It is not assigned an IP address because it handles only
layer 2 connectivity.
The container network interface that the bridge attaches to is configurable
in the ``openstack_user_config.yml`` file.
in the ``openstack_user_config.yml`` file.

42
doc/source/admin/troubleshooting.rst
View File

@ -143,27 +143,6 @@ IP address should be applied to ``br-vxlan``:
valid_lft forever preferred_lft forever
...
IP address should be applied to eth10 inside the required LXC containers:
.. code-block:: console
# ip address show dev eth10
67: eth10: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 150...UP...
link/ether b1:b1:b1:b1:b1:02 brd ff:ff:ff:ff:ff:ff
inet 172.29.240.55/22 brd 172.29.243.255 scope global eth10
valid_lft forever preferred_lft forever
...
``br-vxlan`` should contain veth-pair ends from required LXC containers and
a physical interface or tagged-subinterface:
.. code-block:: console
# brctl show br-vxlan
bridge name bridge id STP enabled interfaces
br-vxlan 8000.ghijkl123456 no bond1.100
3333333_eth10
Checking services
~~~~~~~~~~~~~~~~~
@ -287,15 +266,15 @@ LXC containers, VXLAN overlay and the Linuxbridge ml2 driver.
NETWORK NODE
+-------------+ +-------------+ +-----------------+
+->"If VXLAN"+->+ *bond#.#00 +--->+ *br vxlan +-->+*Container eth10 +
| +-------------+ +-------------+ +-----------------+
+----------------+ | +-------------+
|physical network|++ +--->+ | brq bridge |+--> Neutron DHCP/Router
+----------------+ | +-------------+
| +-------------+ +-------------+ +-----------------+
+->"If VLAN"+->+ bond1 +--->+ br vlan +-->+ Container eth11 +
+-------------+ +-------------+ +-----------------+
+-------------+ +-------------+
+->"If VXLAN"+->+ *bond#.#00 +--->+ *br vxlan +-->
| +-------------+ +-------------+ |
+----------------+ | +-------------+
|physical network|++ +--->+| brq bridge |+--> Neutron DHCP/Router
+----------------+ | +-------------+
| +-------------+ +-------------+ |
+->"If VLAN"+->+ bond1 +--->+ br vlan +-->
+-------------+ +-------------+
Preliminary troubleshooting questions to answer:
------------------------------------------------
@ -402,8 +381,7 @@ Yes:
Are VXLAN VTEP addresses able to ping each other?
No:
- Check ``br-vxlan`` interface on Compute and ``eth10``
inside the Neutron network agent container.
- Check ``br-vxlan`` interface on Compute and Network nodes
- Check veth pairs between containers and linux bridges on the host.
- Check that linux bridges contain the proper interfaces
on compute and network nodes.

10
etc/openstack_deploy/openstack_user_config.yml.example
View File

@ -222,13 +222,11 @@
# nova compute and all storage service containers. Optionally applies to
# to the swift proxy service.
# - Network of type 'vxlan' that contains neutron VXLAN tenant networks
# 1 to 1000 and uses 'br-vxlan' bridge on target hosts. Maps to the
# 'eth10' device in containers. Applies to all neutron agent containers
# and neutron agents on bare metal hosts.
# 1 to 1000 and uses 'br-vxlan' bridge on target hosts. Applies to all
# neutron agents on bare metal hosts.
# - Network of type 'vlan' that contains neutron VLAN networks 101 to 200
# and 301 to 400 and uses the 'br-vlan' bridge on target hosts. Maps to
# the 'eth11' device in containers. Applies to all neutron agent
# containers and neutron agents on bare metal hosts.
# and 301 to 400 and uses the 'br-vlan' bridge on target hosts. Applies
# to all neutron agent containers and neutron agents on bare metal hosts.
# - Network of type 'flat' that contains one neutron flat network and uses
# the 'br-vlan' bridge on target hosts. Maps to the 'eth12' device in
# containers. Applies to all neutron agent containers and neutron agents