diff --git a/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.24.4 b/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.24.4 new file mode 120000 index 000000000..78ecdec70 --- /dev/null +++ b/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.24.4 @@ -0,0 +1 @@ +k8s-v1.28.4 \ No newline at end of file diff --git a/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.24.4/calico-cni.yaml.j2 b/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.24.4/calico-cni.yaml.j2 deleted file mode 100644 index de815ac42..000000000 --- a/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.24.4/calico-cni.yaml.j2 +++ /dev/null @@ -1,4841 +0,0 @@ ---- -# Calico Version v3.24.0 -# Based off: -# https://raw.githubusercontent.com/projectcalico/calico/v3.24.0/manifests/calico.yaml -# -# This file is licensed under Apache 2.0. You can obtain a copy of the license at: -# https://github.com/projectcalico/calico/blob/v3.24.0/calico/LICENSE -# -# The following modifications have been made: -# -# - Added node-role.kubernetes.io/master nodeSelector to calico-kube-controller -# - Expand calico-node failsafe rules to include kube-apiserver port -# - Set the log level for calico-node and felix to warning -# - Set the calico-node iptables backend to 'auto' for compatibility with -# iptables >= 1.8 -# - Do not use default ippools. Create them explicitly for ipv4 / ipv6 -# - Set CPU requests to 0 -# -# Copyright (c) 2022 Wind River Systems, Inc. -# -# SPDX-License-Identifier: Apache-2.0 -# -# This is the calico configuration file for systems with less than 50 nodes. -# -# Notes when upversioning calico: -# -# Refer to configuration instructions here: -# https://docs.projectcalico.org/getting-started/kubernetes/self-managed-onprem/ -# -# It is important to test in a multi-controller environment (ie: AIO-DX) that -# the pods can be pinged by their endpoint. ie: A pod running on controller-1 -# can be pinged from controller-0, and vice versa. -# -# An additional test (run on controller-0) that queries the calico daemon -# health and status -# -# curl -o calicoctl -L https://github.com/projectcalico/calico/releases/download/ -# v3.24.0/calicoctl-linux-amd64 -# chmod +x calicoctl -# sudo mv calicoctl /usr/local/bin -# export DATASTORE_TYPE=kubernetes -# sudo calicoctl node status -# -# Source: calico/templates/calico-kube-controllers.yaml -# This manifest creates a Pod Disruption Budget for Controller to allow K8s Cluster Autoscaler to evict - -apiVersion: policy/v1 -kind: PodDisruptionBudget -metadata: - name: calico-kube-controllers - namespace: kube-system - labels: - k8s-app: calico-kube-controllers -spec: - maxUnavailable: 1 - selector: - matchLabels: - k8s-app: calico-kube-controllers ---- -# Source: calico/templates/calico-kube-controllers.yaml -apiVersion: v1 -kind: ServiceAccount -metadata: - name: calico-kube-controllers - namespace: kube-system ---- -# Source: calico/templates/calico-node.yaml -apiVersion: v1 -kind: ServiceAccount -metadata: - name: calico-node - namespace: kube-system ---- -# Source: calico/templates/calico-config.yaml -# This ConfigMap is used to configure a self-hosted Calico installation. -kind: ConfigMap -apiVersion: v1 -metadata: - name: calico-config - namespace: kube-system -data: - # Typha is disabled. - typha_service_name: "none" - # Configure the backend to use. - calico_backend: "bird" - - # Configure the MTU to use for workload interfaces and tunnels. - # By default, MTU is auto-detected, and explicitly setting this field should not be required. - # You can override auto-detection by providing a non-zero value. - veth_mtu: "0" - - # The CNI network configuration to install on each node. The special - # values in this config will be automatically populated. - cni_network_config: |- - { - "name": "k8s-pod-network", - "cniVersion": "0.3.1", - "plugins": [ - { - "type": "calico", - "log_level": "info", - "log_file_path": "/var/log/calico/cni/cni.log", - "datastore_type": "kubernetes", - "nodename": "__KUBERNETES_NODE_NAME__", - "mtu": __CNI_MTU__, - "ipam": { - "type": "calico-ipam", - "assign_ipv4": "{{ "true" if cluster_network_ipv4 else "false" }}", - "assign_ipv6": "{{ "true" if cluster_network_ipv6 else "false" }}" - }, - "policy": { - "type": "k8s" - }, - "kubernetes": { - "kubeconfig": "__KUBECONFIG_FILEPATH__" - } - }, - { - "type": "portmap", - "snat": true, - "capabilities": {"portMappings": true} - }, - { - "type": "bandwidth", - "capabilities": {"bandwidth": true} - } - ] - } ---- -# Source: calico/templates/kdd-crds.yaml -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - name: bgpconfigurations.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: BGPConfiguration - listKind: BGPConfigurationList - plural: bgpconfigurations - singular: bgpconfiguration - preserveUnknownFields: false - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - description: BGPConfiguration contains the configuration for any BGP routing. - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: BGPConfigurationSpec contains the values of the BGP configuration. - properties: - asNumber: - description: 'ASNumber is the default AS number used by a node. [Default: - 64512]' - format: int32 - type: integer - bindMode: - description: BindMode indicates whether to listen for BGP connections - on all addresses (None) or only on the node's canonical IP address - Node.Spec.BGP.IPvXAddress (NodeIP). Default behaviour is to listen - for BGP connections on all addresses. - type: string - communities: - description: Communities is a list of BGP community values and their - arbitrary names for tagging routes. - items: - description: Community contains standard or large community value - and its name. - properties: - name: - description: Name given to community value. - type: string - value: - description: Value must be of format `aa:nn` or `aa:nn:mm`. - For standard community use `aa:nn` format, where `aa` and - `nn` are 16 bit number. For large community use `aa:nn:mm` - format, where `aa`, `nn` and `mm` are 32 bit number. Where, - `aa` is an AS Number, `nn` and `mm` are per-AS identifier. - pattern: ^(\d+):(\d+)$|^(\d+):(\d+):(\d+)$ - type: string - type: object - type: array - listenPort: - description: ListenPort is the port where BGP protocol should listen. - Defaults to 179 - maximum: 65535 - minimum: 1 - type: integer - logSeverityScreen: - description: 'LogSeverityScreen is the log severity above which logs - are sent to the stdout. [Default: INFO]' - type: string - nodeMeshMaxRestartTime: - description: Time to allow for software restart for node-to-mesh peerings. When - specified, this is configured as the graceful restart timeout. When - not specified, the BIRD default of 120s is used. This field can - only be set on the default BGPConfiguration instance and requires - that NodeMesh is enabled - type: string - nodeMeshPassword: - description: Optional BGP password for full node-to-mesh peerings. - This field can only be set on the default BGPConfiguration instance - and requires that NodeMesh is enabled - properties: - secretKeyRef: - description: Selects a key of a secret in the node pod's namespace. - properties: - key: - description: The key of the secret to select from. Must be - a valid secret key. - type: string - name: - description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid?' - type: string - optional: - description: Specify whether the Secret or its key must be - defined - type: boolean - required: - - key - type: object - type: object - nodeToNodeMeshEnabled: - description: 'NodeToNodeMeshEnabled sets whether full node to node - BGP mesh is enabled. [Default: true]' - type: boolean - prefixAdvertisements: - description: PrefixAdvertisements contains per-prefix advertisement - configuration. - items: - description: PrefixAdvertisement configures advertisement properties - for the specified CIDR. - properties: - cidr: - description: CIDR for which properties should be advertised. - type: string - communities: - description: Communities can be list of either community names - already defined in `Specs.Communities` or community value - of format `aa:nn` or `aa:nn:mm`. For standard community use - `aa:nn` format, where `aa` and `nn` are 16 bit number. For - large community use `aa:nn:mm` format, where `aa`, `nn` and - `mm` are 32 bit number. Where,`aa` is an AS Number, `nn` and - `mm` are per-AS identifier. - items: - type: string - type: array - type: object - type: array - serviceClusterIPs: - description: ServiceClusterIPs are the CIDR blocks from which service - cluster IPs are allocated. If specified, Calico will advertise these - blocks, as well as any cluster IPs within them. - items: - description: ServiceClusterIPBlock represents a single allowed ClusterIP - CIDR block. - properties: - cidr: - type: string - type: object - type: array - serviceExternalIPs: - description: ServiceExternalIPs are the CIDR blocks for Kubernetes - Service External IPs. Kubernetes Service ExternalIPs will only be - advertised if they are within one of these blocks. - items: - description: ServiceExternalIPBlock represents a single allowed - External IP CIDR block. - properties: - cidr: - type: string - type: object - type: array - serviceLoadBalancerIPs: - description: ServiceLoadBalancerIPs are the CIDR blocks for Kubernetes - Service LoadBalancer IPs. Kubernetes Service status.LoadBalancer.Ingress - IPs will only be advertised if they are within one of these blocks. - items: - description: ServiceLoadBalancerIPBlock represents a single allowed - LoadBalancer IP CIDR block. - properties: - cidr: - type: string - type: object - type: array - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] ---- -# Source: calico/templates/kdd-crds.yaml -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - name: bgppeers.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: BGPPeer - listKind: BGPPeerList - plural: bgppeers - singular: bgppeer - preserveUnknownFields: false - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: BGPPeerSpec contains the specification for a BGPPeer resource. - properties: - asNumber: - description: The AS Number of the peer. - format: int32 - type: integer - keepOriginalNextHop: - description: Option to keep the original nexthop field when routes - are sent to a BGP Peer. Setting "true" configures the selected BGP - Peers node to use the "next hop keep;" instead of "next hop self;"(default) - in the specific branch of the Node on "bird.cfg". - type: boolean - maxRestartTime: - description: Time to allow for software restart. When specified, - this is configured as the graceful restart timeout. When not specified, - the BIRD default of 120s is used. - type: string - node: - description: The node name identifying the Calico node instance that - is targeted by this peer. If this is not set, and no nodeSelector - is specified, then this BGP peer selects all nodes in the cluster. - type: string - nodeSelector: - description: Selector for the nodes that should have this peering. When - this is set, the Node field must be empty. - type: string - numAllowedLocalASNumbers: - description: Maximum number of local AS numbers that are allowed in - the AS path for received routes. This removes BGP loop prevention - and should only be used if absolutely necesssary. - format: int32 - type: integer - password: - description: Optional BGP password for the peerings generated by this - BGPPeer resource. - properties: - secretKeyRef: - description: Selects a key of a secret in the node pod's namespace. - properties: - key: - description: The key of the secret to select from. Must be - a valid secret key. - type: string - name: - description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid?' - type: string - optional: - description: Specify whether the Secret or its key must be - defined - type: boolean - required: - - key - type: object - type: object - peerIP: - description: The IP address of the peer followed by an optional port - number to peer with. If port number is given, format should be `[]:port` - or `:` for IPv4. If optional port number is not set, - and this peer IP and ASNumber belongs to a calico/node with ListenPort - set in BGPConfiguration, then we use that port to peer. - type: string - peerSelector: - description: Selector for the remote nodes to peer with. When this - is set, the PeerIP and ASNumber fields must be empty. For each - peering between the local node and selected remote nodes, we configure - an IPv4 peering if both ends have NodeBGPSpec.IPv4Address specified, - and an IPv6 peering if both ends have NodeBGPSpec.IPv6Address specified. The - remote AS number comes from the remote node's NodeBGPSpec.ASNumber, - or the global default if that is not set. - type: string - sourceAddress: - description: Specifies whether and how to configure a source address - for the peerings generated by this BGPPeer resource. Default value - "UseNodeIP" means to configure the node IP as the source address. "None" - means not to configure a source address. - type: string - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] ---- -# Source: calico/templates/kdd-crds.yaml -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - name: blockaffinities.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: BlockAffinity - listKind: BlockAffinityList - plural: blockaffinities - singular: blockaffinity - preserveUnknownFields: false - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: BlockAffinitySpec contains the specification for a BlockAffinity - resource. - properties: - cidr: - type: string - deleted: - description: Deleted indicates that this block affinity is being deleted. - This field is a string for compatibility with older releases that - mistakenly treat this field as a string. - type: string - node: - type: string - state: - type: string - required: - - cidr - - deleted - - node - - state - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] ---- -# Source: calico/templates/kdd-crds.yaml -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: caliconodestatuses.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: CalicoNodeStatus - listKind: CalicoNodeStatusList - plural: caliconodestatuses - singular: caliconodestatus - preserveUnknownFields: false - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: CalicoNodeStatusSpec contains the specification for a CalicoNodeStatus - resource. - properties: - classes: - description: Classes declares the types of information to monitor - for this calico/node, and allows for selective status reporting - about certain subsets of information. - items: - type: string - type: array - node: - description: The node name identifies the Calico node instance for - node status. - type: string - updatePeriodSeconds: - description: UpdatePeriodSeconds is the period at which CalicoNodeStatus - should be updated. Set to 0 to disable CalicoNodeStatus refresh. - Maximum update period is one day. - format: int32 - type: integer - type: object - status: - description: CalicoNodeStatusStatus defines the observed state of CalicoNodeStatus. - No validation needed for status since it is updated by Calico. - properties: - agent: - description: Agent holds agent status on the node. - properties: - birdV4: - description: BIRDV4 represents the latest observed status of bird4. - properties: - lastBootTime: - description: LastBootTime holds the value of lastBootTime - from bird.ctl output. - type: string - lastReconfigurationTime: - description: LastReconfigurationTime holds the value of lastReconfigTime - from bird.ctl output. - type: string - routerID: - description: Router ID used by bird. - type: string - state: - description: The state of the BGP Daemon. - type: string - version: - description: Version of the BGP daemon - type: string - type: object - birdV6: - description: BIRDV6 represents the latest observed status of bird6. - properties: - lastBootTime: - description: LastBootTime holds the value of lastBootTime - from bird.ctl output. - type: string - lastReconfigurationTime: - description: LastReconfigurationTime holds the value of lastReconfigTime - from bird.ctl output. - type: string - routerID: - description: Router ID used by bird. - type: string - state: - description: The state of the BGP Daemon. - type: string - version: - description: Version of the BGP daemon - type: string - type: object - type: object - bgp: - description: BGP holds node BGP status. - properties: - numberEstablishedV4: - description: The total number of IPv4 established bgp sessions. - type: integer - numberEstablishedV6: - description: The total number of IPv6 established bgp sessions. - type: integer - numberNotEstablishedV4: - description: The total number of IPv4 non-established bgp sessions. - type: integer - numberNotEstablishedV6: - description: The total number of IPv6 non-established bgp sessions. - type: integer - peersV4: - description: PeersV4 represents IPv4 BGP peers status on the node. - items: - description: CalicoNodePeer contains the status of BGP peers - on the node. - properties: - peerIP: - description: IP address of the peer whose condition we are - reporting. - type: string - since: - description: Since the state or reason last changed. - type: string - state: - description: State is the BGP session state. - type: string - type: - description: Type indicates whether this peer is configured - via the node-to-node mesh, or via en explicit global or - per-node BGPPeer object. - type: string - type: object - type: array - peersV6: - description: PeersV6 represents IPv6 BGP peers status on the node. - items: - description: CalicoNodePeer contains the status of BGP peers - on the node. - properties: - peerIP: - description: IP address of the peer whose condition we are - reporting. - type: string - since: - description: Since the state or reason last changed. - type: string - state: - description: State is the BGP session state. - type: string - type: - description: Type indicates whether this peer is configured - via the node-to-node mesh, or via en explicit global or - per-node BGPPeer object. - type: string - type: object - type: array - required: - - numberEstablishedV4 - - numberEstablishedV6 - - numberNotEstablishedV4 - - numberNotEstablishedV6 - type: object - lastUpdated: - description: LastUpdated is a timestamp representing the server time - when CalicoNodeStatus object last updated. It is represented in - RFC3339 form and is in UTC. - format: date-time - nullable: true - type: string - routes: - description: Routes reports routes known to the Calico BGP daemon - on the node. - properties: - routesV4: - description: RoutesV4 represents IPv4 routes on the node. - items: - description: CalicoNodeRoute contains the status of BGP routes - on the node. - properties: - destination: - description: Destination of the route. - type: string - gateway: - description: Gateway for the destination. - type: string - interface: - description: Interface for the destination - type: string - learnedFrom: - description: LearnedFrom contains information regarding - where this route originated. - properties: - peerIP: - description: If sourceType is NodeMesh or BGPPeer, IP - address of the router that sent us this route. - type: string - sourceType: - description: Type of the source where a route is learned - from. - type: string - type: object - type: - description: Type indicates if the route is being used for - forwarding or not. - type: string - type: object - type: array - routesV6: - description: RoutesV6 represents IPv6 routes on the node. - items: - description: CalicoNodeRoute contains the status of BGP routes - on the node. - properties: - destination: - description: Destination of the route. - type: string - gateway: - description: Gateway for the destination. - type: string - interface: - description: Interface for the destination - type: string - learnedFrom: - description: LearnedFrom contains information regarding - where this route originated. - properties: - peerIP: - description: If sourceType is NodeMesh or BGPPeer, IP - address of the router that sent us this route. - type: string - sourceType: - description: Type of the source where a route is learned - from. - type: string - type: object - type: - description: Type indicates if the route is being used for - forwarding or not. - type: string - type: object - type: array - type: object - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] ---- -# Source: calico/templates/kdd-crds.yaml -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - name: clusterinformations.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: ClusterInformation - listKind: ClusterInformationList - plural: clusterinformations - singular: clusterinformation - preserveUnknownFields: false - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - description: ClusterInformation contains the cluster specific information. - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: ClusterInformationSpec contains the values of describing - the cluster. - properties: - calicoVersion: - description: CalicoVersion is the version of Calico that the cluster - is running - type: string - clusterGUID: - description: ClusterGUID is the GUID of the cluster - type: string - clusterType: - description: ClusterType describes the type of the cluster - type: string - datastoreReady: - description: DatastoreReady is used during significant datastore migrations - to signal to components such as Felix that it should wait before - accessing the datastore. - type: boolean - variant: - description: Variant declares which variant of Calico should be active. - type: string - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] ---- -# Source: calico/templates/kdd-crds.yaml -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - name: felixconfigurations.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: FelixConfiguration - listKind: FelixConfigurationList - plural: felixconfigurations - singular: felixconfiguration - preserveUnknownFields: false - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - description: Felix Configuration contains the configuration for Felix. - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: FelixConfigurationSpec contains the values of the Felix configuration. - properties: - allowIPIPPacketsFromWorkloads: - description: 'AllowIPIPPacketsFromWorkloads controls whether Felix - will add a rule to drop IPIP encapsulated traffic from workloads - [Default: false]' - type: boolean - allowVXLANPacketsFromWorkloads: - description: 'AllowVXLANPacketsFromWorkloads controls whether Felix - will add a rule to drop VXLAN encapsulated traffic from workloads - [Default: false]' - type: boolean - awsSrcDstCheck: - description: 'Set source-destination-check on AWS EC2 instances. Accepted - value must be one of "DoNothing", "Enable" or "Disable". [Default: - DoNothing]' - enum: - - DoNothing - - Enable - - Disable - type: string - bpfConnectTimeLoadBalancingEnabled: - description: 'BPFConnectTimeLoadBalancingEnabled when in BPF mode, - controls whether Felix installs the connection-time load balancer. The - connect-time load balancer is required for the host to be able to - reach Kubernetes services and it improves the performance of pod-to-service - connections. The only reason to disable it is for debugging purposes. [Default: - true]' - type: boolean - bpfDataIfacePattern: - description: BPFDataIfacePattern is a regular expression that controls - which interfaces Felix should attach BPF programs to in order to - catch traffic to/from the network. This needs to match the interfaces - that Calico workload traffic flows over as well as any interfaces - that handle incoming traffic to nodeports and services from outside - the cluster. It should not match the workload interfaces (usually - named cali...). - type: string - bpfDisableUnprivileged: - description: 'BPFDisableUnprivileged, if enabled, Felix sets the kernel.unprivileged_bpf_disabled - sysctl to disable unprivileged use of BPF. This ensures that unprivileged - users cannot access Calico''s BPF maps and cannot insert their own - BPF programs to interfere with Calico''s. [Default: true]' - type: boolean - bpfEnabled: - description: 'BPFEnabled, if enabled Felix will use the BPF dataplane. - [Default: false]' - type: boolean - bpfEnforceRPF: - description: 'BPFEnforceRPF enforce strict RPF on all interfaces with - BPF programs regardless of what is the per-interfaces or global - setting. Possible values are Disabled or Strict. [Default: Strict]' - type: string - bpfExtToServiceConnmark: - description: 'BPFExtToServiceConnmark in BPF mode, control a 32bit - mark that is set on connections from an external client to a local - service. This mark allows us to control how packets of that connection - are routed within the host and how is routing interpreted by RPF - check. [Default: 0]' - type: integer - bpfExternalServiceMode: - description: 'BPFExternalServiceMode in BPF mode, controls how connections - from outside the cluster to services (node ports and cluster IPs) - are forwarded to remote workloads. If set to "Tunnel" then both - request and response traffic is tunneled to the remote node. If - set to "DSR", the request traffic is tunneled but the response traffic - is sent directly from the remote node. In "DSR" mode, the remote - node appears to use the IP of the ingress node; this requires a - permissive L2 network. [Default: Tunnel]' - type: string - bpfKubeProxyEndpointSlicesEnabled: - description: BPFKubeProxyEndpointSlicesEnabled in BPF mode, controls - whether Felix's embedded kube-proxy accepts EndpointSlices or not. - type: boolean - bpfKubeProxyIptablesCleanupEnabled: - description: 'BPFKubeProxyIptablesCleanupEnabled, if enabled in BPF - mode, Felix will proactively clean up the upstream Kubernetes kube-proxy''s - iptables chains. Should only be enabled if kube-proxy is not running. [Default: - true]' - type: boolean - bpfKubeProxyMinSyncPeriod: - description: 'BPFKubeProxyMinSyncPeriod, in BPF mode, controls the - minimum time between updates to the dataplane for Felix''s embedded - kube-proxy. Lower values give reduced set-up latency. Higher values - reduce Felix CPU usage by batching up more work. [Default: 1s]' - type: string - bpfLogLevel: - description: 'BPFLogLevel controls the log level of the BPF programs - when in BPF dataplane mode. One of "Off", "Info", or "Debug". The - logs are emitted to the BPF trace pipe, accessible with the command - `tc exec bpf debug`. [Default: Off].' - type: string - bpfMapSizeConntrack: - description: 'BPFMapSizeConntrack sets the size for the conntrack - map. This map must be large enough to hold an entry for each active - connection. Warning: changing the size of the conntrack map can - cause disruption.' - type: integer - bpfMapSizeIPSets: - description: BPFMapSizeIPSets sets the size for ipsets map. The IP - sets map must be large enough to hold an entry for each endpoint - matched by every selector in the source/destination matches in network - policy. Selectors such as "all()" can result in large numbers of - entries (one entry per endpoint in that case). - type: integer - bpfMapSizeIfState: - description: BPFMapSizeIfState sets the size for ifstate map. The - ifstate map must be large enough to hold an entry for each device - (host + workloads) on a host. - type: integer - bpfMapSizeNATAffinity: - type: integer - bpfMapSizeNATBackend: - description: BPFMapSizeNATBackend sets the size for nat back end map. - This is the total number of endpoints. This is mostly more than - the size of the number of services. - type: integer - bpfMapSizeNATFrontend: - description: BPFMapSizeNATFrontend sets the size for nat front end - map. FrontendMap should be large enough to hold an entry for each - nodeport, external IP and each port in each service. - type: integer - bpfMapSizeRoute: - description: BPFMapSizeRoute sets the size for the routes map. The - routes map should be large enough to hold one entry per workload - and a handful of entries per host (enough to cover its own IPs and - tunnel IPs). - type: integer - bpfPSNATPorts: - anyOf: - - type: integer - - type: string - description: 'BPFPSNATPorts sets the range from which we randomly - pick a port if there is a source port collision. This should be - within the ephemeral range as defined by RFC 6056 (1024–65535) and - preferably outside the ephemeral ranges used by common operating - systems. Linux uses 32768–60999, while others mostly use the IANA - defined range 49152–65535. It is not necessarily a problem if this - range overlaps with the operating systems. Both ends of the range - are inclusive. [Default: 20000:29999]' - pattern: ^.* - x-kubernetes-int-or-string: true - bpfPolicyDebugEnabled: - description: BPFPolicyDebugEnabled when true, Felix records detailed - information about the BPF policy programs, which can be examined - with the calico-bpf command-line tool. - type: boolean - chainInsertMode: - description: 'ChainInsertMode controls whether Felix hooks the kernel''s - top-level iptables chains by inserting a rule at the top of the - chain or by appending a rule at the bottom. insert is the safe default - since it prevents Calico''s rules from being bypassed. If you switch - to append mode, be sure that the other rules in the chains signal - acceptance by falling through to the Calico rules, otherwise the - Calico policy will be bypassed. [Default: insert]' - type: string - dataplaneDriver: - description: DataplaneDriver filename of the external dataplane driver - to use. Only used if UseInternalDataplaneDriver is set to false. - type: string - dataplaneWatchdogTimeout: - description: 'DataplaneWatchdogTimeout is the readiness/liveness timeout - used for Felix''s (internal) dataplane driver. Increase this value - if you experience spurious non-ready or non-live events when Felix - is under heavy load. Decrease the value to get felix to report non-live - or non-ready more quickly. [Default: 90s]' - type: string - debugDisableLogDropping: - type: boolean - debugMemoryProfilePath: - type: string - debugSimulateCalcGraphHangAfter: - type: string - debugSimulateDataplaneHangAfter: - type: string - defaultEndpointToHostAction: - description: 'DefaultEndpointToHostAction controls what happens to - traffic that goes from a workload endpoint to the host itself (after - the traffic hits the endpoint egress policy). By default Calico - blocks traffic from workload endpoints to the host itself with an - iptables "DROP" action. If you want to allow some or all traffic - from endpoint to host, set this parameter to RETURN or ACCEPT. Use - RETURN if you have your own rules in the iptables "INPUT" chain; - Calico will insert its rules at the top of that chain, then "RETURN" - packets to the "INPUT" chain once it has completed processing workload - endpoint egress policy. Use ACCEPT to unconditionally accept packets - from workloads after processing workload endpoint egress policy. - [Default: Drop]' - type: string - deviceRouteProtocol: - description: This defines the route protocol added to programmed device - routes, by default this will be RTPROT_BOOT when left blank. - type: integer - deviceRouteSourceAddress: - description: This is the IPv4 source address to use on programmed - device routes. By default the source address is left blank, leaving - the kernel to choose the source address used. - type: string - deviceRouteSourceAddressIPv6: - description: This is the IPv6 source address to use on programmed - device routes. By default the source address is left blank, leaving - the kernel to choose the source address used. - type: string - disableConntrackInvalidCheck: - type: boolean - endpointReportingDelay: - type: string - endpointReportingEnabled: - type: boolean - externalNodesList: - description: ExternalNodesCIDRList is a list of CIDR's of external-non-calico-nodes - which may source tunnel traffic and have the tunneled traffic be - accepted at calico nodes. - items: - type: string - type: array - failsafeInboundHostPorts: - description: 'FailsafeInboundHostPorts is a list of UDP/TCP ports - and CIDRs that Felix will allow incoming traffic to host endpoints - on irrespective of the security policy. This is useful to avoid - accidentally cutting off a host with incorrect configuration. For - back-compatibility, if the protocol is not specified, it defaults - to "tcp". If a CIDR is not specified, it will allow traffic from - all addresses. To disable all inbound host ports, use the value - none. The default value allows ssh access and DHCP. [Default: tcp:22, - udp:68, tcp:179, tcp:2379, tcp:2380, tcp:6443, tcp:6666, tcp:6667]' - items: - description: ProtoPort is combination of protocol, port, and CIDR. - Protocol and port must be specified. - properties: - net: - type: string - port: - type: integer - protocol: - type: string - required: - - port - - protocol - type: object - type: array - failsafeOutboundHostPorts: - description: 'FailsafeOutboundHostPorts is a list of UDP/TCP ports - and CIDRs that Felix will allow outgoing traffic from host endpoints - to irrespective of the security policy. This is useful to avoid - accidentally cutting off a host with incorrect configuration. For - back-compatibility, if the protocol is not specified, it defaults - to "tcp". If a CIDR is not specified, it will allow traffic from - all addresses. To disable all outbound host ports, use the value - none. The default value opens etcd''s standard ports to ensure that - Felix does not get cut off from etcd as well as allowing DHCP and - DNS. [Default: tcp:179, tcp:2379, tcp:2380, tcp:6443, tcp:6666, - tcp:6667, udp:53, udp:67]' - items: - description: ProtoPort is combination of protocol, port, and CIDR. - Protocol and port must be specified. - properties: - net: - type: string - port: - type: integer - protocol: - type: string - required: - - port - - protocol - type: object - type: array - featureDetectOverride: - description: FeatureDetectOverride is used to override the feature - detection. Values are specified in a comma separated list with no - spaces, example; "SNATFullyRandom=true,MASQFullyRandom=false,RestoreSupportsLock=". - "true" or "false" will force the feature, empty or omitted values - are auto-detected. - type: string - floatingIPs: - description: FloatingIPs configures whether or not Felix will program - floating IP addresses. - enum: - - Enabled - - Disabled - type: string - genericXDPEnabled: - description: 'GenericXDPEnabled enables Generic XDP so network cards - that don''t support XDP offload or driver modes can use XDP. This - is not recommended since it doesn''t provide better performance - than iptables. [Default: false]' - type: boolean - healthEnabled: - type: boolean - healthHost: - type: string - healthPort: - type: integer - interfaceExclude: - description: 'InterfaceExclude is a comma-separated list of interfaces - that Felix should exclude when monitoring for host endpoints. The - default value ensures that Felix ignores Kubernetes'' IPVS dummy - interface, which is used internally by kube-proxy. If you want to - exclude multiple interface names using a single value, the list - supports regular expressions. For regular expressions you must wrap - the value with ''/''. For example having values ''/^kube/,veth1'' - will exclude all interfaces that begin with ''kube'' and also the - interface ''veth1''. [Default: kube-ipvs0]' - type: string - interfacePrefix: - description: 'InterfacePrefix is the interface name prefix that identifies - workload endpoints and so distinguishes them from host endpoint - interfaces. Note: in environments other than bare metal, the orchestrators - configure this appropriately. For example our Kubernetes and Docker - integrations set the ''cali'' value, and our OpenStack integration - sets the ''tap'' value. [Default: cali]' - type: string - interfaceRefreshInterval: - description: InterfaceRefreshInterval is the period at which Felix - rescans local interfaces to verify their state. The rescan can be - disabled by setting the interval to 0. - type: string - ipipEnabled: - description: 'IPIPEnabled overrides whether Felix should configure - an IPIP interface on the host. Optional as Felix determines this - based on the existing IP pools. [Default: nil (unset)]' - type: boolean - ipipMTU: - description: 'IPIPMTU is the MTU to set on the tunnel device. See - Configuring MTU [Default: 1440]' - type: integer - ipsetsRefreshInterval: - description: 'IpsetsRefreshInterval is the period at which Felix re-checks - all iptables state to ensure that no other process has accidentally - broken Calico''s rules. Set to 0 to disable iptables refresh. [Default: - 90s]' - type: string - iptablesBackend: - description: IptablesBackend specifies which backend of iptables will - be used. The default is legacy. - type: string - iptablesFilterAllowAction: - type: string - iptablesLockFilePath: - description: 'IptablesLockFilePath is the location of the iptables - lock file. You may need to change this if the lock file is not in - its standard location (for example if you have mapped it into Felix''s - container at a different path). [Default: /run/xtables.lock]' - type: string - iptablesLockProbeInterval: - description: 'IptablesLockProbeInterval is the time that Felix will - wait between attempts to acquire the iptables lock if it is not - available. Lower values make Felix more responsive when the lock - is contended, but use more CPU. [Default: 50ms]' - type: string - iptablesLockTimeout: - description: 'IptablesLockTimeout is the time that Felix will wait - for the iptables lock, or 0, to disable. To use this feature, Felix - must share the iptables lock file with all other processes that - also take the lock. When running Felix inside a container, this - requires the /run directory of the host to be mounted into the calico/node - or calico/felix container. [Default: 0s disabled]' - type: string - iptablesMangleAllowAction: - type: string - iptablesMarkMask: - description: 'IptablesMarkMask is the mask that Felix selects its - IPTables Mark bits from. Should be a 32 bit hexadecimal number with - at least 8 bits set, none of which clash with any other mark bits - in use on the system. [Default: 0xff000000]' - format: int32 - type: integer - iptablesNATOutgoingInterfaceFilter: - type: string - iptablesPostWriteCheckInterval: - description: 'IptablesPostWriteCheckInterval is the period after Felix - has done a write to the dataplane that it schedules an extra read - back in order to check the write was not clobbered by another process. - This should only occur if another application on the system doesn''t - respect the iptables lock. [Default: 1s]' - type: string - iptablesRefreshInterval: - description: 'IptablesRefreshInterval is the period at which Felix - re-checks the IP sets in the dataplane to ensure that no other process - has accidentally broken Calico''s rules. Set to 0 to disable IP - sets refresh. Note: the default for this value is lower than the - other refresh intervals as a workaround for a Linux kernel bug that - was fixed in kernel version 4.11. If you are using v4.11 or greater - you may want to set this to, a higher value to reduce Felix CPU - usage. [Default: 10s]' - type: string - ipv6Support: - description: IPv6Support controls whether Felix enables support for - IPv6 (if supported by the in-use dataplane). - type: boolean - kubeNodePortRanges: - description: 'KubeNodePortRanges holds list of port ranges used for - service node ports. Only used if felix detects kube-proxy running - in ipvs mode. Felix uses these ranges to separate host and workload - traffic. [Default: 30000:32767].' - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - logDebugFilenameRegex: - description: LogDebugFilenameRegex controls which source code files - have their Debug log output included in the logs. Only logs from - files with names that match the given regular expression are included. The - filter only applies to Debug level logs. - type: string - logFilePath: - description: 'LogFilePath is the full path to the Felix log. Set to - none to disable file logging. [Default: /var/log/calico/felix.log]' - type: string - logPrefix: - description: 'LogPrefix is the log prefix that Felix uses when rendering - LOG rules. [Default: calico-packet]' - type: string - logSeverityFile: - description: 'LogSeverityFile is the log severity above which logs - are sent to the log file. [Default: Info]' - type: string - logSeverityScreen: - description: 'LogSeverityScreen is the log severity above which logs - are sent to the stdout. [Default: Info]' - type: string - logSeveritySys: - description: 'LogSeveritySys is the log severity above which logs - are sent to the syslog. Set to None for no logging to syslog. [Default: - Info]' - type: string - maxIpsetSize: - type: integer - metadataAddr: - description: 'MetadataAddr is the IP address or domain name of the - server that can answer VM queries for cloud-init metadata. In OpenStack, - this corresponds to the machine running nova-api (or in Ubuntu, - nova-api-metadata). A value of none (case insensitive) means that - Felix should not set up any NAT rule for the metadata path. [Default: - 127.0.0.1]' - type: string - metadataPort: - description: 'MetadataPort is the port of the metadata server. This, - combined with global.MetadataAddr (if not ''None''), is used to - set up a NAT rule, from 169.254.169.254:80 to MetadataAddr:MetadataPort. - In most cases this should not need to be changed [Default: 8775].' - type: integer - mtuIfacePattern: - description: MTUIfacePattern is a regular expression that controls - which interfaces Felix should scan in order to calculate the host's - MTU. This should not match workload interfaces (usually named cali...). - type: string - natOutgoingAddress: - description: NATOutgoingAddress specifies an address to use when performing - source NAT for traffic in a natOutgoing pool that is leaving the - network. By default the address used is an address on the interface - the traffic is leaving on (ie it uses the iptables MASQUERADE target) - type: string - natPortRange: - anyOf: - - type: integer - - type: string - description: NATPortRange specifies the range of ports that is used - for port mapping when doing outgoing NAT. When unset the default - behavior of the network stack is used. - pattern: ^.* - x-kubernetes-int-or-string: true - netlinkTimeout: - type: string - openstackRegion: - description: 'OpenstackRegion is the name of the region that a particular - Felix belongs to. In a multi-region Calico/OpenStack deployment, - this must be configured somehow for each Felix (here in the datamodel, - or in felix.cfg or the environment on each compute node), and must - match the [calico] openstack_region value configured in neutron.conf - on each node. [Default: Empty]' - type: string - policySyncPathPrefix: - description: 'PolicySyncPathPrefix is used to by Felix to communicate - policy changes to external services, like Application layer policy. - [Default: Empty]' - type: string - prometheusGoMetricsEnabled: - description: 'PrometheusGoMetricsEnabled disables Go runtime metrics - collection, which the Prometheus client does by default, when set - to false. This reduces the number of metrics reported, reducing - Prometheus load. [Default: true]' - type: boolean - prometheusMetricsEnabled: - description: 'PrometheusMetricsEnabled enables the Prometheus metrics - server in Felix if set to true. [Default: false]' - type: boolean - prometheusMetricsHost: - description: 'PrometheusMetricsHost is the host that the Prometheus - metrics server should bind to. [Default: empty]' - type: string - prometheusMetricsPort: - description: 'PrometheusMetricsPort is the TCP port that the Prometheus - metrics server should bind to. [Default: 9091]' - type: integer - prometheusProcessMetricsEnabled: - description: 'PrometheusProcessMetricsEnabled disables process metrics - collection, which the Prometheus client does by default, when set - to false. This reduces the number of metrics reported, reducing - Prometheus load. [Default: true]' - type: boolean - prometheusWireGuardMetricsEnabled: - description: 'PrometheusWireGuardMetricsEnabled disables wireguard - metrics collection, which the Prometheus client does by default, - when set to false. This reduces the number of metrics reported, - reducing Prometheus load. [Default: true]' - type: boolean - removeExternalRoutes: - description: Whether or not to remove device routes that have not - been programmed by Felix. Disabling this will allow external applications - to also add device routes. This is enabled by default which means - we will remove externally added routes. - type: boolean - reportingInterval: - description: 'ReportingInterval is the interval at which Felix reports - its status into the datastore or 0 to disable. Must be non-zero - in OpenStack deployments. [Default: 30s]' - type: string - reportingTTL: - description: 'ReportingTTL is the time-to-live setting for process-wide - status reports. [Default: 90s]' - type: string - routeRefreshInterval: - description: 'RouteRefreshInterval is the period at which Felix re-checks - the routes in the dataplane to ensure that no other process has - accidentally broken Calico''s rules. Set to 0 to disable route refresh. - [Default: 90s]' - type: string - routeSource: - description: 'RouteSource configures where Felix gets its routing - information. - WorkloadIPs: use workload endpoints to construct - routes. - CalicoIPAM: the default - use IPAM data to construct routes.' - type: string - routeSyncDisabled: - description: RouteSyncDisabled will disable all operations performed - on the route table. Set to true to run in network-policy mode only. - type: boolean - routeTableRange: - description: Deprecated in favor of RouteTableRanges. Calico programs - additional Linux route tables for various purposes. RouteTableRange - specifies the indices of the route tables that Calico should use. - properties: - max: - type: integer - min: - type: integer - required: - - max - - min - type: object - routeTableRanges: - description: Calico programs additional Linux route tables for various - purposes. RouteTableRanges specifies a set of table index ranges - that Calico should use. Deprecates`RouteTableRange`, overrides `RouteTableRange`. - items: - properties: - max: - type: integer - min: - type: integer - required: - - max - - min - type: object - type: array - serviceLoopPrevention: - description: 'When service IP advertisement is enabled, prevent routing - loops to service IPs that are not in use, by dropping or rejecting - packets that do not get DNAT''d by kube-proxy. Unless set to "Disabled", - in which case such routing loops continue to be allowed. [Default: - Drop]' - type: string - sidecarAccelerationEnabled: - description: 'SidecarAccelerationEnabled enables experimental sidecar - acceleration [Default: false]' - type: boolean - usageReportingEnabled: - description: 'UsageReportingEnabled reports anonymous Calico version - number and cluster size to projectcalico.org. Logs warnings returned - by the usage server. For example, if a significant security vulnerability - has been discovered in the version of Calico being used. [Default: - true]' - type: boolean - usageReportingInitialDelay: - description: 'UsageReportingInitialDelay controls the minimum delay - before Felix makes a report. [Default: 300s]' - type: string - usageReportingInterval: - description: 'UsageReportingInterval controls the interval at which - Felix makes reports. [Default: 86400s]' - type: string - useInternalDataplaneDriver: - description: UseInternalDataplaneDriver, if true, Felix will use its - internal dataplane programming logic. If false, it will launch - an external dataplane driver and communicate with it over protobuf. - type: boolean - vxlanEnabled: - description: 'VXLANEnabled overrides whether Felix should create the - VXLAN tunnel device for VXLAN networking. Optional as Felix determines - this based on the existing IP pools. [Default: nil (unset)]' - type: boolean - vxlanMTU: - description: 'VXLANMTU is the MTU to set on the IPv4 VXLAN tunnel - device. See Configuring MTU [Default: 1410]' - type: integer - vxlanMTUV6: - description: 'VXLANMTUV6 is the MTU to set on the IPv6 VXLAN tunnel - device. See Configuring MTU [Default: 1390]' - type: integer - vxlanPort: - type: integer - vxlanVNI: - type: integer - wireguardEnabled: - description: 'WireguardEnabled controls whether Wireguard is enabled - for IPv4 (encapsulating IPv4 traffic over an IPv4 underlay network). - [Default: false]' - type: boolean - wireguardEnabledV6: - description: 'WireguardEnabledV6 controls whether Wireguard is enabled - for IPv6 (encapsulating IPv6 traffic over an IPv6 underlay network). - [Default: false]' - type: boolean - wireguardHostEncryptionEnabled: - description: 'WireguardHostEncryptionEnabled controls whether Wireguard - host-to-host encryption is enabled. [Default: false]' - type: boolean - wireguardInterfaceName: - description: 'WireguardInterfaceName specifies the name to use for - the IPv4 Wireguard interface. [Default: wireguard.cali]' - type: string - wireguardInterfaceNameV6: - description: 'WireguardInterfaceNameV6 specifies the name to use for - the IPv6 Wireguard interface. [Default: wg-v6.cali]' - type: string - wireguardKeepAlive: - description: 'WireguardKeepAlive controls Wireguard PersistentKeepalive - option. Set 0 to disable. [Default: 0]' - type: string - wireguardListeningPort: - description: 'WireguardListeningPort controls the listening port used - by IPv4 Wireguard. [Default: 51820]' - type: integer - wireguardListeningPortV6: - description: 'WireguardListeningPortV6 controls the listening port - used by IPv6 Wireguard. [Default: 51821]' - type: integer - wireguardMTU: - description: 'WireguardMTU controls the MTU on the IPv4 Wireguard - interface. See Configuring MTU [Default: 1440]' - type: integer - wireguardMTUV6: - description: 'WireguardMTUV6 controls the MTU on the IPv6 Wireguard - interface. See Configuring MTU [Default: 1420]' - type: integer - wireguardRoutingRulePriority: - description: 'WireguardRoutingRulePriority controls the priority value - to use for the Wireguard routing rule. [Default: 99]' - type: integer - workloadSourceSpoofing: - description: WorkloadSourceSpoofing controls whether pods can use - the allowedSourcePrefixes annotation to send traffic with a source - IP address that is not theirs. This is disabled by default. When - set to "Any", pods can request any prefix. - type: string - xdpEnabled: - description: 'XDPEnabled enables XDP acceleration for suitable untracked - incoming deny rules. [Default: true]' - type: boolean - xdpRefreshInterval: - description: 'XDPRefreshInterval is the period at which Felix re-checks - all XDP state to ensure that no other process has accidentally broken - Calico''s BPF maps or attached programs. Set to 0 to disable XDP - refresh. [Default: 90s]' - type: string - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] ---- -# Source: calico/templates/kdd-crds.yaml -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - name: globalnetworkpolicies.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: GlobalNetworkPolicy - listKind: GlobalNetworkPolicyList - plural: globalnetworkpolicies - singular: globalnetworkpolicy - preserveUnknownFields: false - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - properties: - applyOnForward: - description: ApplyOnForward indicates to apply the rules in this policy - on forward traffic. - type: boolean - doNotTrack: - description: DoNotTrack indicates whether packets matched by the rules - in this policy should go through the data plane's connection tracking, - such as Linux conntrack. If True, the rules in this policy are - applied before any data plane connection tracking, and packets allowed - by this policy are marked as not to be tracked. - type: boolean - egress: - description: The ordered set of egress rules. Each rule contains - a set of packet match criteria and a corresponding action to apply. - items: - description: "A Rule encapsulates a set of match criteria and an - action. Both selector-based security Policy and security Profiles - reference rules - separated out as a list of rules for both ingress - and egress packet matching. \n Each positive match criteria has - a negated version, prefixed with \"Not\". All the match criteria - within a rule must be satisfied for a packet to match. A single - rule can contain the positive and negative version of a match - and both must be satisfied for the rule to match." - properties: - action: - type: string - destination: - description: Destination contains the match criteria that apply - to destination entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and another selector are defined on the same rule, then - only workload endpoints that are matched by both selectors - will be selected by the rule. \n For NetworkPolicy, an - empty NamespaceSelector implies that the Selector is limited - to selecting only workload endpoints in the same namespace - as the NetworkPolicy. \n For NetworkPolicy, `global()` - NamespaceSelector implies that the Selector is limited - to selecting only GlobalNetworkSet or HostEndpoint. \n - For GlobalNetworkPolicy, an empty NamespaceSelector implies - the Selector applies to workload endpoints across all - namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label \"my_label\". \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label \"my_label\". - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - services: - description: "Services is an optional field that contains - options for matching Kubernetes Services. If specified, - only traffic that originates from or terminates at endpoints - within the selected service(s) will be matched, and only - to/from each endpoint's port. \n Services cannot be specified - on the same rule as Selector, NotSelector, NamespaceSelector, - Nets, NotNets or ServiceAccounts. \n Ports and NotPorts - can only be specified with Services on ingress rules." - properties: - name: - description: Name specifies the name of a Kubernetes - Service to match. - type: string - namespace: - description: Namespace specifies the namespace of the - given Service. If left empty, the rule will match - within this policy's namespace. - type: string - type: object - type: object - http: - description: HTTP contains match criteria that apply to HTTP - requests. - properties: - methods: - description: Methods is an optional field that restricts - the rule to apply only to HTTP requests that use one of - the listed HTTP Methods (e.g. GET, PUT, etc.) Multiple - methods are OR'd together. - items: - type: string - type: array - paths: - description: 'Paths is an optional field that restricts - the rule to apply to HTTP requests that use one of the - listed HTTP Paths. Multiple paths are OR''d together. - e.g: - exact: /foo - prefix: /bar NOTE: Each entry may - ONLY specify either a `exact` or a `prefix` match. The - validator will check for it.' - items: - description: 'HTTPPath specifies an HTTP path to match. - It may be either of the form: exact: : which matches - the path exactly or prefix: : which matches - the path prefix' - properties: - exact: - type: string - prefix: - type: string - type: object - type: array - type: object - icmp: - description: ICMP is an optional field that restricts the rule - to apply to a specific type and code of ICMP traffic. This - should only be specified if the Protocol field is set to "ICMP" - or "ICMPv6". - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel's iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - ipVersion: - description: IPVersion is an optional field that restricts the - rule to only match a specific IP version. - type: integer - metadata: - description: Metadata contains additional information for this - rule - properties: - annotations: - additionalProperties: - type: string - description: Annotations is a set of key value pairs that - give extra information about the rule - type: object - type: object - notICMP: - description: NotICMP is the negated version of the ICMP field. - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel's iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - notProtocol: - anyOf: - - type: integer - - type: string - description: NotProtocol is the negated version of the Protocol - field. - pattern: ^.* - x-kubernetes-int-or-string: true - protocol: - anyOf: - - type: integer - - type: string - description: "Protocol is an optional field that restricts the - rule to only apply to traffic of a specific IP protocol. Required - if any of the EntityRules contain Ports (because ports only - apply to certain protocols). \n Must be one of these string - values: \"TCP\", \"UDP\", \"ICMP\", \"ICMPv6\", \"SCTP\", - \"UDPLite\" or an integer in the range 1-255." - pattern: ^.* - x-kubernetes-int-or-string: true - source: - description: Source contains the match criteria that apply to - source entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and another selector are defined on the same rule, then - only workload endpoints that are matched by both selectors - will be selected by the rule. \n For NetworkPolicy, an - empty NamespaceSelector implies that the Selector is limited - to selecting only workload endpoints in the same namespace - as the NetworkPolicy. \n For NetworkPolicy, `global()` - NamespaceSelector implies that the Selector is limited - to selecting only GlobalNetworkSet or HostEndpoint. \n - For GlobalNetworkPolicy, an empty NamespaceSelector implies - the Selector applies to workload endpoints across all - namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label \"my_label\". \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label \"my_label\". - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - services: - description: "Services is an optional field that contains - options for matching Kubernetes Services. If specified, - only traffic that originates from or terminates at endpoints - within the selected service(s) will be matched, and only - to/from each endpoint's port. \n Services cannot be specified - on the same rule as Selector, NotSelector, NamespaceSelector, - Nets, NotNets or ServiceAccounts. \n Ports and NotPorts - can only be specified with Services on ingress rules." - properties: - name: - description: Name specifies the name of a Kubernetes - Service to match. - type: string - namespace: - description: Namespace specifies the namespace of the - given Service. If left empty, the rule will match - within this policy's namespace. - type: string - type: object - type: object - required: - - action - type: object - type: array - ingress: - description: The ordered set of ingress rules. Each rule contains - a set of packet match criteria and a corresponding action to apply. - items: - description: "A Rule encapsulates a set of match criteria and an - action. Both selector-based security Policy and security Profiles - reference rules - separated out as a list of rules for both ingress - and egress packet matching. \n Each positive match criteria has - a negated version, prefixed with \"Not\". All the match criteria - within a rule must be satisfied for a packet to match. A single - rule can contain the positive and negative version of a match - and both must be satisfied for the rule to match." - properties: - action: - type: string - destination: - description: Destination contains the match criteria that apply - to destination entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and another selector are defined on the same rule, then - only workload endpoints that are matched by both selectors - will be selected by the rule. \n For NetworkPolicy, an - empty NamespaceSelector implies that the Selector is limited - to selecting only workload endpoints in the same namespace - as the NetworkPolicy. \n For NetworkPolicy, `global()` - NamespaceSelector implies that the Selector is limited - to selecting only GlobalNetworkSet or HostEndpoint. \n - For GlobalNetworkPolicy, an empty NamespaceSelector implies - the Selector applies to workload endpoints across all - namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label \"my_label\". \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label \"my_label\". - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - services: - description: "Services is an optional field that contains - options for matching Kubernetes Services. If specified, - only traffic that originates from or terminates at endpoints - within the selected service(s) will be matched, and only - to/from each endpoint's port. \n Services cannot be specified - on the same rule as Selector, NotSelector, NamespaceSelector, - Nets, NotNets or ServiceAccounts. \n Ports and NotPorts - can only be specified with Services on ingress rules." - properties: - name: - description: Name specifies the name of a Kubernetes - Service to match. - type: string - namespace: - description: Namespace specifies the namespace of the - given Service. If left empty, the rule will match - within this policy's namespace. - type: string - type: object - type: object - http: - description: HTTP contains match criteria that apply to HTTP - requests. - properties: - methods: - description: Methods is an optional field that restricts - the rule to apply only to HTTP requests that use one of - the listed HTTP Methods (e.g. GET, PUT, etc.) Multiple - methods are OR'd together. - items: - type: string - type: array - paths: - description: 'Paths is an optional field that restricts - the rule to apply to HTTP requests that use one of the - listed HTTP Paths. Multiple paths are OR''d together. - e.g: - exact: /foo - prefix: /bar NOTE: Each entry may - ONLY specify either a `exact` or a `prefix` match. The - validator will check for it.' - items: - description: 'HTTPPath specifies an HTTP path to match. - It may be either of the form: exact: : which matches - the path exactly or prefix: : which matches - the path prefix' - properties: - exact: - type: string - prefix: - type: string - type: object - type: array - type: object - icmp: - description: ICMP is an optional field that restricts the rule - to apply to a specific type and code of ICMP traffic. This - should only be specified if the Protocol field is set to "ICMP" - or "ICMPv6". - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel's iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - ipVersion: - description: IPVersion is an optional field that restricts the - rule to only match a specific IP version. - type: integer - metadata: - description: Metadata contains additional information for this - rule - properties: - annotations: - additionalProperties: - type: string - description: Annotations is a set of key value pairs that - give extra information about the rule - type: object - type: object - notICMP: - description: NotICMP is the negated version of the ICMP field. - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel's iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - notProtocol: - anyOf: - - type: integer - - type: string - description: NotProtocol is the negated version of the Protocol - field. - pattern: ^.* - x-kubernetes-int-or-string: true - protocol: - anyOf: - - type: integer - - type: string - description: "Protocol is an optional field that restricts the - rule to only apply to traffic of a specific IP protocol. Required - if any of the EntityRules contain Ports (because ports only - apply to certain protocols). \n Must be one of these string - values: \"TCP\", \"UDP\", \"ICMP\", \"ICMPv6\", \"SCTP\", - \"UDPLite\" or an integer in the range 1-255." - pattern: ^.* - x-kubernetes-int-or-string: true - source: - description: Source contains the match criteria that apply to - source entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and another selector are defined on the same rule, then - only workload endpoints that are matched by both selectors - will be selected by the rule. \n For NetworkPolicy, an - empty NamespaceSelector implies that the Selector is limited - to selecting only workload endpoints in the same namespace - as the NetworkPolicy. \n For NetworkPolicy, `global()` - NamespaceSelector implies that the Selector is limited - to selecting only GlobalNetworkSet or HostEndpoint. \n - For GlobalNetworkPolicy, an empty NamespaceSelector implies - the Selector applies to workload endpoints across all - namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label \"my_label\". \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label \"my_label\". - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - services: - description: "Services is an optional field that contains - options for matching Kubernetes Services. If specified, - only traffic that originates from or terminates at endpoints - within the selected service(s) will be matched, and only - to/from each endpoint's port. \n Services cannot be specified - on the same rule as Selector, NotSelector, NamespaceSelector, - Nets, NotNets or ServiceAccounts. \n Ports and NotPorts - can only be specified with Services on ingress rules." - properties: - name: - description: Name specifies the name of a Kubernetes - Service to match. - type: string - namespace: - description: Namespace specifies the namespace of the - given Service. If left empty, the rule will match - within this policy's namespace. - type: string - type: object - type: object - required: - - action - type: object - type: array - namespaceSelector: - description: NamespaceSelector is an optional field for an expression - used to select a pod based on namespaces. - type: string - order: - description: Order is an optional field that specifies the order in - which the policy is applied. Policies with higher "order" are applied - after those with lower order. If the order is omitted, it may be - considered to be "infinite" - i.e. the policy will be applied last. Policies - with identical order will be applied in alphanumerical order based - on the Policy "Name". - type: number - preDNAT: - description: PreDNAT indicates to apply the rules in this policy before - any DNAT. - type: boolean - selector: - description: "The selector is an expression used to pick pick out - the endpoints that the policy should be applied to. \n Selector - expressions follow this syntax: \n \tlabel == \"string_literal\" - \ -> comparison, e.g. my_label == \"foo bar\" \tlabel != \"string_literal\" - \ -> not equal; also matches if label is not present \tlabel in - { \"a\", \"b\", \"c\", ... } -> true if the value of label X is - one of \"a\", \"b\", \"c\" \tlabel not in { \"a\", \"b\", \"c\", - ... } -> true if the value of label X is not one of \"a\", \"b\", - \"c\" \thas(label_name) -> True if that label is present \t! expr - -> negation of expr \texpr && expr -> Short-circuit and \texpr - || expr -> Short-circuit or \t( expr ) -> parens for grouping \tall() - or the empty selector -> matches all endpoints. \n Label names are - allowed to contain alphanumerics, -, _ and /. String literals are - more permissive but they do not support escape characters. \n Examples - (with made-up labels): \n \ttype == \"webserver\" && deployment - == \"prod\" \ttype in {\"frontend\", \"backend\"} \tdeployment != - \"dev\" \t! has(label_name)" - type: string - serviceAccountSelector: - description: ServiceAccountSelector is an optional field for an expression - used to select a pod based on service accounts. - type: string - types: - description: "Types indicates whether this policy applies to ingress, - or to egress, or to both. When not explicitly specified (and so - the value on creation is empty or nil), Calico defaults Types according - to what Ingress and Egress rules are present in the policy. The - default is: \n - [ PolicyTypeIngress ], if there are no Egress rules - (including the case where there are also no Ingress rules) \n - - [ PolicyTypeEgress ], if there are Egress rules but no Ingress - rules \n - [ PolicyTypeIngress, PolicyTypeEgress ], if there are - both Ingress and Egress rules. \n When the policy is read back again, - Types will always be one of these values, never empty or nil." - items: - description: PolicyType enumerates the possible values of the PolicySpec - Types field. - type: string - type: array - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] ---- -# Source: calico/templates/kdd-crds.yaml -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - name: globalnetworksets.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: GlobalNetworkSet - listKind: GlobalNetworkSetList - plural: globalnetworksets - singular: globalnetworkset - preserveUnknownFields: false - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - description: GlobalNetworkSet contains a set of arbitrary IP sub-networks/CIDRs - that share labels to allow rules to refer to them via selectors. The labels - of GlobalNetworkSet are not namespaced. - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: GlobalNetworkSetSpec contains the specification for a NetworkSet - resource. - properties: - nets: - description: The list of IP networks that belong to this set. - items: - type: string - type: array - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] ---- -# Source: calico/templates/kdd-crds.yaml -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - name: hostendpoints.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: HostEndpoint - listKind: HostEndpointList - plural: hostendpoints - singular: hostendpoint - preserveUnknownFields: false - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: HostEndpointSpec contains the specification for a HostEndpoint - resource. - properties: - expectedIPs: - description: "The expected IP addresses (IPv4 and IPv6) of the endpoint. - If \"InterfaceName\" is not present, Calico will look for an interface - matching any of the IPs in the list and apply policy to that. Note: - \tWhen using the selector match criteria in an ingress or egress - security Policy \tor Profile, Calico converts the selector into - a set of IP addresses. For host \tendpoints, the ExpectedIPs field - is used for that purpose. (If only the interface \tname is specified, - Calico does not learn the IPs of the interface for use in match - \tcriteria.)" - items: - type: string - type: array - interfaceName: - description: "Either \"*\", or the name of a specific Linux interface - to apply policy to; or empty. \"*\" indicates that this HostEndpoint - governs all traffic to, from or through the default network namespace - of the host named by the \"Node\" field; entering and leaving that - namespace via any interface, including those from/to non-host-networked - local workloads. \n If InterfaceName is not \"*\", this HostEndpoint - only governs traffic that enters or leaves the host through the - specific interface named by InterfaceName, or - when InterfaceName - is empty - through the specific interface that has one of the IPs - in ExpectedIPs. Therefore, when InterfaceName is empty, at least - one expected IP must be specified. Only external interfaces (such - as \"eth0\") are supported here; it isn't possible for a HostEndpoint - to protect traffic through a specific local workload interface. - \n Note: Only some kinds of policy are implemented for \"*\" HostEndpoints; - initially just pre-DNAT policy. Please check Calico documentation - for the latest position." - type: string - node: - description: The node name identifying the Calico node instance. - type: string - ports: - description: Ports contains the endpoint's named ports, which may - be referenced in security policy rules. - items: - properties: - name: - type: string - port: - type: integer - protocol: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - required: - - name - - port - - protocol - type: object - type: array - profiles: - description: A list of identifiers of security Profile objects that - apply to this endpoint. Each profile is applied in the order that - they appear in this list. Profile rules are applied after the selector-based - security policy. - items: - type: string - type: array - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] ---- -# Source: calico/templates/kdd-crds.yaml -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - name: ipamblocks.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: IPAMBlock - listKind: IPAMBlockList - plural: ipamblocks - singular: ipamblock - preserveUnknownFields: false - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: IPAMBlockSpec contains the specification for an IPAMBlock - resource. - properties: - affinity: - description: Affinity of the block, if this block has one. If set, - it will be of the form "host:". If not set, this block - is not affine to a host. - type: string - allocations: - description: Array of allocations in-use within this block. nil entries - mean the allocation is free. For non-nil entries at index i, the - index is the ordinal of the allocation within this block and the - value is the index of the associated attributes in the Attributes - array. - items: - type: integer - # TODO: This nullable is manually added in. We should update controller-gen - # to handle []*int properly itself. - nullable: true - type: array - attributes: - description: Attributes is an array of arbitrary metadata associated - with allocations in the block. To find attributes for a given allocation, - use the value of the allocation's entry in the Allocations array - as the index of the element in this array. - items: - properties: - handle_id: - type: string - secondary: - additionalProperties: - type: string - type: object - type: object - type: array - cidr: - description: The block's CIDR. - type: string - deleted: - description: Deleted is an internal boolean used to workaround a limitation - in the Kubernetes API whereby deletion will not return a conflict - error if the block has been updated. It should not be set manually. - type: boolean - sequenceNumber: - default: 0 - description: We store a sequence number that is updated each time - the block is written. Each allocation will also store the sequence - number of the block at the time of its creation. When releasing - an IP, passing the sequence number associated with the allocation - allows us to protect against a race condition and ensure the IP - hasn't been released and re-allocated since the release request. - format: int64 - type: integer - sequenceNumberForAllocation: - additionalProperties: - format: int64 - type: integer - description: Map of allocated ordinal within the block to sequence - number of the block at the time of allocation. Kubernetes does not - allow numerical keys for maps, so the key is cast to a string. - type: object - strictAffinity: - description: StrictAffinity on the IPAMBlock is deprecated and no - longer used by the code. Use IPAMConfig StrictAffinity instead. - type: boolean - unallocated: - description: Unallocated is an ordered list of allocations which are - free in the block. - items: - type: integer - type: array - required: - - allocations - - attributes - - cidr - - strictAffinity - - unallocated - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] ---- -# Source: calico/templates/kdd-crds.yaml -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - name: ipamconfigs.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: IPAMConfig - listKind: IPAMConfigList - plural: ipamconfigs - singular: ipamconfig - preserveUnknownFields: false - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: IPAMConfigSpec contains the specification for an IPAMConfig - resource. - properties: - autoAllocateBlocks: - type: boolean - maxBlocksPerHost: - description: MaxBlocksPerHost, if non-zero, is the max number of blocks - that can be affine to each host. - maximum: 2147483647 - minimum: 0 - type: integer - strictAffinity: - type: boolean - required: - - autoAllocateBlocks - - strictAffinity - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] ---- -# Source: calico/templates/kdd-crds.yaml -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - name: ipamhandles.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: IPAMHandle - listKind: IPAMHandleList - plural: ipamhandles - singular: ipamhandle - preserveUnknownFields: false - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: IPAMHandleSpec contains the specification for an IPAMHandle - resource. - properties: - block: - additionalProperties: - type: integer - type: object - deleted: - type: boolean - handleID: - type: string - required: - - block - - handleID - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] ---- -# Source: calico/templates/kdd-crds.yaml -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - name: ippools.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: IPPool - listKind: IPPoolList - plural: ippools - singular: ippool - preserveUnknownFields: false - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: IPPoolSpec contains the specification for an IPPool resource. - properties: - allowedUses: - description: AllowedUse controls what the IP pool will be used for. If - not specified or empty, defaults to ["Tunnel", "Workload"] for back-compatibility - items: - type: string - type: array - blockSize: - description: The block size to use for IP address assignments from - this pool. Defaults to 26 for IPv4 and 122 for IPv6. - type: integer - cidr: - description: The pool CIDR. - type: string - disableBGPExport: - description: 'Disable exporting routes from this IP Pool''s CIDR over - BGP. [Default: false]' - type: boolean - disabled: - description: When disabled is true, Calico IPAM will not assign addresses - from this pool. - type: boolean - ipip: - description: 'Deprecated: this field is only used for APIv1 backwards - compatibility. Setting this field is not allowed, this field is - for internal use only.' - properties: - enabled: - description: When enabled is true, ipip tunneling will be used - to deliver packets to destinations within this pool. - type: boolean - mode: - description: The IPIP mode. This can be one of "always" or "cross-subnet". A - mode of "always" will also use IPIP tunneling for routing to - destination IP addresses within this pool. A mode of "cross-subnet" - will only use IPIP tunneling when the destination node is on - a different subnet to the originating node. The default value - (if not specified) is "always". - type: string - type: object - ipipMode: - description: Contains configuration for IPIP tunneling for this pool. - If not specified, then this is defaulted to "Never" (i.e. IPIP tunneling - is disabled). - type: string - nat-outgoing: - description: 'Deprecated: this field is only used for APIv1 backwards - compatibility. Setting this field is not allowed, this field is - for internal use only.' - type: boolean - natOutgoing: - description: When nat-outgoing is true, packets sent from Calico networked - containers in this pool to destinations outside of this pool will - be masqueraded. - type: boolean - nodeSelector: - description: Allows IPPool to allocate for a specific node by label - selector. - type: string - vxlanMode: - description: Contains configuration for VXLAN tunneling for this pool. - If not specified, then this is defaulted to "Never" (i.e. VXLAN - tunneling is disabled). - type: string - required: - - cidr - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] ---- -# Source: calico/templates/kdd-crds.yaml -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - annotations: - controller-gen.kubebuilder.io/version: (devel) - creationTimestamp: null - name: ipreservations.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: IPReservation - listKind: IPReservationList - plural: ipreservations - singular: ipreservation - preserveUnknownFields: false - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: IPReservationSpec contains the specification for an IPReservation - resource. - properties: - reservedCIDRs: - description: ReservedCIDRs is a list of CIDRs and/or IP addresses - that Calico IPAM will exclude from new allocations. - items: - type: string - type: array - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] ---- -# Source: calico/templates/kdd-crds.yaml -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - name: kubecontrollersconfigurations.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: KubeControllersConfiguration - listKind: KubeControllersConfigurationList - plural: kubecontrollersconfigurations - singular: kubecontrollersconfiguration - preserveUnknownFields: false - scope: Cluster - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: KubeControllersConfigurationSpec contains the values of the - Kubernetes controllers configuration. - properties: - controllers: - description: Controllers enables and configures individual Kubernetes - controllers - properties: - namespace: - description: Namespace enables and configures the namespace controller. - Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform reconciliation - with the Calico datastore. [Default: 5m]' - type: string - type: object - node: - description: Node enables and configures the node controller. - Enabled by default, set to nil to disable. - properties: - hostEndpoint: - description: HostEndpoint controls syncing nodes to host endpoints. - Disabled by default, set to nil to disable. - properties: - autoCreate: - description: 'AutoCreate enables automatic creation of - host endpoints for every node. [Default: Disabled]' - type: string - type: object - leakGracePeriod: - description: 'LeakGracePeriod is the period used by the controller - to determine if an IP address has been leaked. Set to 0 - to disable IP garbage collection. [Default: 15m]' - type: string - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform reconciliation - with the Calico datastore. [Default: 5m]' - type: string - syncLabels: - description: 'SyncLabels controls whether to copy Kubernetes - node labels to Calico nodes. [Default: Enabled]' - type: string - type: object - policy: - description: Policy enables and configures the policy controller. - Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform reconciliation - with the Calico datastore. [Default: 5m]' - type: string - type: object - serviceAccount: - description: ServiceAccount enables and configures the service - account controller. Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform reconciliation - with the Calico datastore. [Default: 5m]' - type: string - type: object - workloadEndpoint: - description: WorkloadEndpoint enables and configures the workload - endpoint controller. Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform reconciliation - with the Calico datastore. [Default: 5m]' - type: string - type: object - type: object - debugProfilePort: - description: DebugProfilePort configures the port to serve memory - and cpu profiles on. If not specified, profiling is disabled. - format: int32 - type: integer - etcdV3CompactionPeriod: - description: 'EtcdV3CompactionPeriod is the period between etcdv3 - compaction requests. Set to 0 to disable. [Default: 10m]' - type: string - healthChecks: - description: 'HealthChecks enables or disables support for health - checks [Default: Enabled]' - type: string - logSeverityScreen: - description: 'LogSeverityScreen is the log severity above which logs - are sent to the stdout. [Default: Info]' - type: string - prometheusMetricsPort: - description: 'PrometheusMetricsPort is the TCP port that the Prometheus - metrics server should bind to. Set to 0 to disable. [Default: 9094]' - type: integer - required: - - controllers - type: object - status: - description: KubeControllersConfigurationStatus represents the status - of the configuration. It's useful for admins to be able to see the actual - config that was applied, which can be modified by environment variables - on the kube-controllers process. - properties: - environmentVars: - additionalProperties: - type: string - description: EnvironmentVars contains the environment variables on - the kube-controllers that influenced the RunningConfig. - type: object - runningConfig: - description: RunningConfig contains the effective config that is running - in the kube-controllers pod, after merging the API resource with - any environment variables. - properties: - controllers: - description: Controllers enables and configures individual Kubernetes - controllers - properties: - namespace: - description: Namespace enables and configures the namespace - controller. Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform - reconciliation with the Calico datastore. [Default: - 5m]' - type: string - type: object - node: - description: Node enables and configures the node controller. - Enabled by default, set to nil to disable. - properties: - hostEndpoint: - description: HostEndpoint controls syncing nodes to host - endpoints. Disabled by default, set to nil to disable. - properties: - autoCreate: - description: 'AutoCreate enables automatic creation - of host endpoints for every node. [Default: Disabled]' - type: string - type: object - leakGracePeriod: - description: 'LeakGracePeriod is the period used by the - controller to determine if an IP address has been leaked. - Set to 0 to disable IP garbage collection. [Default: - 15m]' - type: string - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform - reconciliation with the Calico datastore. [Default: - 5m]' - type: string - syncLabels: - description: 'SyncLabels controls whether to copy Kubernetes - node labels to Calico nodes. [Default: Enabled]' - type: string - type: object - policy: - description: Policy enables and configures the policy controller. - Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform - reconciliation with the Calico datastore. [Default: - 5m]' - type: string - type: object - serviceAccount: - description: ServiceAccount enables and configures the service - account controller. Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform - reconciliation with the Calico datastore. [Default: - 5m]' - type: string - type: object - workloadEndpoint: - description: WorkloadEndpoint enables and configures the workload - endpoint controller. Enabled by default, set to nil to disable. - properties: - reconcilerPeriod: - description: 'ReconcilerPeriod is the period to perform - reconciliation with the Calico datastore. [Default: - 5m]' - type: string - type: object - type: object - debugProfilePort: - description: DebugProfilePort configures the port to serve memory - and cpu profiles on. If not specified, profiling is disabled. - format: int32 - type: integer - etcdV3CompactionPeriod: - description: 'EtcdV3CompactionPeriod is the period between etcdv3 - compaction requests. Set to 0 to disable. [Default: 10m]' - type: string - healthChecks: - description: 'HealthChecks enables or disables support for health - checks [Default: Enabled]' - type: string - logSeverityScreen: - description: 'LogSeverityScreen is the log severity above which - logs are sent to the stdout. [Default: Info]' - type: string - prometheusMetricsPort: - description: 'PrometheusMetricsPort is the TCP port that the Prometheus - metrics server should bind to. Set to 0 to disable. [Default: - 9094]' - type: integer - required: - - controllers - type: object - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] ---- -# Source: calico/templates/kdd-crds.yaml -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - name: networkpolicies.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: NetworkPolicy - listKind: NetworkPolicyList - plural: networkpolicies - singular: networkpolicy - preserveUnknownFields: false - scope: Namespaced - versions: - - name: v1 - schema: - openAPIV3Schema: - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - properties: - egress: - description: The ordered set of egress rules. Each rule contains - a set of packet match criteria and a corresponding action to apply. - items: - description: "A Rule encapsulates a set of match criteria and an - action. Both selector-based security Policy and security Profiles - reference rules - separated out as a list of rules for both ingress - and egress packet matching. \n Each positive match criteria has - a negated version, prefixed with \"Not\". All the match criteria - within a rule must be satisfied for a packet to match. A single - rule can contain the positive and negative version of a match - and both must be satisfied for the rule to match." - properties: - action: - type: string - destination: - description: Destination contains the match criteria that apply - to destination entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and another selector are defined on the same rule, then - only workload endpoints that are matched by both selectors - will be selected by the rule. \n For NetworkPolicy, an - empty NamespaceSelector implies that the Selector is limited - to selecting only workload endpoints in the same namespace - as the NetworkPolicy. \n For NetworkPolicy, `global()` - NamespaceSelector implies that the Selector is limited - to selecting only GlobalNetworkSet or HostEndpoint. \n - For GlobalNetworkPolicy, an empty NamespaceSelector implies - the Selector applies to workload endpoints across all - namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label \"my_label\". \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label \"my_label\". - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - services: - description: "Services is an optional field that contains - options for matching Kubernetes Services. If specified, - only traffic that originates from or terminates at endpoints - within the selected service(s) will be matched, and only - to/from each endpoint's port. \n Services cannot be specified - on the same rule as Selector, NotSelector, NamespaceSelector, - Nets, NotNets or ServiceAccounts. \n Ports and NotPorts - can only be specified with Services on ingress rules." - properties: - name: - description: Name specifies the name of a Kubernetes - Service to match. - type: string - namespace: - description: Namespace specifies the namespace of the - given Service. If left empty, the rule will match - within this policy's namespace. - type: string - type: object - type: object - http: - description: HTTP contains match criteria that apply to HTTP - requests. - properties: - methods: - description: Methods is an optional field that restricts - the rule to apply only to HTTP requests that use one of - the listed HTTP Methods (e.g. GET, PUT, etc.) Multiple - methods are OR'd together. - items: - type: string - type: array - paths: - description: 'Paths is an optional field that restricts - the rule to apply to HTTP requests that use one of the - listed HTTP Paths. Multiple paths are OR''d together. - e.g: - exact: /foo - prefix: /bar NOTE: Each entry may - ONLY specify either a `exact` or a `prefix` match. The - validator will check for it.' - items: - description: 'HTTPPath specifies an HTTP path to match. - It may be either of the form: exact: : which matches - the path exactly or prefix: : which matches - the path prefix' - properties: - exact: - type: string - prefix: - type: string - type: object - type: array - type: object - icmp: - description: ICMP is an optional field that restricts the rule - to apply to a specific type and code of ICMP traffic. This - should only be specified if the Protocol field is set to "ICMP" - or "ICMPv6". - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel's iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - ipVersion: - description: IPVersion is an optional field that restricts the - rule to only match a specific IP version. - type: integer - metadata: - description: Metadata contains additional information for this - rule - properties: - annotations: - additionalProperties: - type: string - description: Annotations is a set of key value pairs that - give extra information about the rule - type: object - type: object - notICMP: - description: NotICMP is the negated version of the ICMP field. - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel's iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - notProtocol: - anyOf: - - type: integer - - type: string - description: NotProtocol is the negated version of the Protocol - field. - pattern: ^.* - x-kubernetes-int-or-string: true - protocol: - anyOf: - - type: integer - - type: string - description: "Protocol is an optional field that restricts the - rule to only apply to traffic of a specific IP protocol. Required - if any of the EntityRules contain Ports (because ports only - apply to certain protocols). \n Must be one of these string - values: \"TCP\", \"UDP\", \"ICMP\", \"ICMPv6\", \"SCTP\", - \"UDPLite\" or an integer in the range 1-255." - pattern: ^.* - x-kubernetes-int-or-string: true - source: - description: Source contains the match criteria that apply to - source entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and another selector are defined on the same rule, then - only workload endpoints that are matched by both selectors - will be selected by the rule. \n For NetworkPolicy, an - empty NamespaceSelector implies that the Selector is limited - to selecting only workload endpoints in the same namespace - as the NetworkPolicy. \n For NetworkPolicy, `global()` - NamespaceSelector implies that the Selector is limited - to selecting only GlobalNetworkSet or HostEndpoint. \n - For GlobalNetworkPolicy, an empty NamespaceSelector implies - the Selector applies to workload endpoints across all - namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label \"my_label\". \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label \"my_label\". - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - services: - description: "Services is an optional field that contains - options for matching Kubernetes Services. If specified, - only traffic that originates from or terminates at endpoints - within the selected service(s) will be matched, and only - to/from each endpoint's port. \n Services cannot be specified - on the same rule as Selector, NotSelector, NamespaceSelector, - Nets, NotNets or ServiceAccounts. \n Ports and NotPorts - can only be specified with Services on ingress rules." - properties: - name: - description: Name specifies the name of a Kubernetes - Service to match. - type: string - namespace: - description: Namespace specifies the namespace of the - given Service. If left empty, the rule will match - within this policy's namespace. - type: string - type: object - type: object - required: - - action - type: object - type: array - ingress: - description: The ordered set of ingress rules. Each rule contains - a set of packet match criteria and a corresponding action to apply. - items: - description: "A Rule encapsulates a set of match criteria and an - action. Both selector-based security Policy and security Profiles - reference rules - separated out as a list of rules for both ingress - and egress packet matching. \n Each positive match criteria has - a negated version, prefixed with \"Not\". All the match criteria - within a rule must be satisfied for a packet to match. A single - rule can contain the positive and negative version of a match - and both must be satisfied for the rule to match." - properties: - action: - type: string - destination: - description: Destination contains the match criteria that apply - to destination entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and another selector are defined on the same rule, then - only workload endpoints that are matched by both selectors - will be selected by the rule. \n For NetworkPolicy, an - empty NamespaceSelector implies that the Selector is limited - to selecting only workload endpoints in the same namespace - as the NetworkPolicy. \n For NetworkPolicy, `global()` - NamespaceSelector implies that the Selector is limited - to selecting only GlobalNetworkSet or HostEndpoint. \n - For GlobalNetworkPolicy, an empty NamespaceSelector implies - the Selector applies to workload endpoints across all - namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label \"my_label\". \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label \"my_label\". - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - services: - description: "Services is an optional field that contains - options for matching Kubernetes Services. If specified, - only traffic that originates from or terminates at endpoints - within the selected service(s) will be matched, and only - to/from each endpoint's port. \n Services cannot be specified - on the same rule as Selector, NotSelector, NamespaceSelector, - Nets, NotNets or ServiceAccounts. \n Ports and NotPorts - can only be specified with Services on ingress rules." - properties: - name: - description: Name specifies the name of a Kubernetes - Service to match. - type: string - namespace: - description: Namespace specifies the namespace of the - given Service. If left empty, the rule will match - within this policy's namespace. - type: string - type: object - type: object - http: - description: HTTP contains match criteria that apply to HTTP - requests. - properties: - methods: - description: Methods is an optional field that restricts - the rule to apply only to HTTP requests that use one of - the listed HTTP Methods (e.g. GET, PUT, etc.) Multiple - methods are OR'd together. - items: - type: string - type: array - paths: - description: 'Paths is an optional field that restricts - the rule to apply to HTTP requests that use one of the - listed HTTP Paths. Multiple paths are OR''d together. - e.g: - exact: /foo - prefix: /bar NOTE: Each entry may - ONLY specify either a `exact` or a `prefix` match. The - validator will check for it.' - items: - description: 'HTTPPath specifies an HTTP path to match. - It may be either of the form: exact: : which matches - the path exactly or prefix: : which matches - the path prefix' - properties: - exact: - type: string - prefix: - type: string - type: object - type: array - type: object - icmp: - description: ICMP is an optional field that restricts the rule - to apply to a specific type and code of ICMP traffic. This - should only be specified if the Protocol field is set to "ICMP" - or "ICMPv6". - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel's iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - ipVersion: - description: IPVersion is an optional field that restricts the - rule to only match a specific IP version. - type: integer - metadata: - description: Metadata contains additional information for this - rule - properties: - annotations: - additionalProperties: - type: string - description: Annotations is a set of key value pairs that - give extra information about the rule - type: object - type: object - notICMP: - description: NotICMP is the negated version of the ICMP field. - properties: - code: - description: Match on a specific ICMP code. If specified, - the Type value must also be specified. This is a technical - limitation imposed by the kernel's iptables firewall, - which Calico uses to enforce the rule. - type: integer - type: - description: Match on a specific ICMP type. For example - a value of 8 refers to ICMP Echo Request (i.e. pings). - type: integer - type: object - notProtocol: - anyOf: - - type: integer - - type: string - description: NotProtocol is the negated version of the Protocol - field. - pattern: ^.* - x-kubernetes-int-or-string: true - protocol: - anyOf: - - type: integer - - type: string - description: "Protocol is an optional field that restricts the - rule to only apply to traffic of a specific IP protocol. Required - if any of the EntityRules contain Ports (because ports only - apply to certain protocols). \n Must be one of these string - values: \"TCP\", \"UDP\", \"ICMP\", \"ICMPv6\", \"SCTP\", - \"UDPLite\" or an integer in the range 1-255." - pattern: ^.* - x-kubernetes-int-or-string: true - source: - description: Source contains the match criteria that apply to - source entity. - properties: - namespaceSelector: - description: "NamespaceSelector is an optional field that - contains a selector expression. Only traffic that originates - from (or terminates at) endpoints within the selected - namespaces will be matched. When both NamespaceSelector - and another selector are defined on the same rule, then - only workload endpoints that are matched by both selectors - will be selected by the rule. \n For NetworkPolicy, an - empty NamespaceSelector implies that the Selector is limited - to selecting only workload endpoints in the same namespace - as the NetworkPolicy. \n For NetworkPolicy, `global()` - NamespaceSelector implies that the Selector is limited - to selecting only GlobalNetworkSet or HostEndpoint. \n - For GlobalNetworkPolicy, an empty NamespaceSelector implies - the Selector applies to workload endpoints across all - namespaces." - type: string - nets: - description: Nets is an optional field that restricts the - rule to only apply to traffic that originates from (or - terminates at) IP addresses in any of the given subnets. - items: - type: string - type: array - notNets: - description: NotNets is the negated version of the Nets - field. - items: - type: string - type: array - notPorts: - description: NotPorts is the negated version of the Ports - field. Since only some protocols have ports, if any ports - are specified it requires the Protocol match in the Rule - to be set to "TCP" or "UDP". - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - notSelector: - description: NotSelector is the negated version of the Selector - field. See Selector field for subtleties with negated - selectors. - type: string - ports: - description: "Ports is an optional field that restricts - the rule to only apply to traffic that has a source (destination) - port that matches one of these ranges/values. This value - is a list of integers or strings that represent ranges - of ports. \n Since only some protocols have ports, if - any ports are specified it requires the Protocol match - in the Rule to be set to \"TCP\" or \"UDP\"." - items: - anyOf: - - type: integer - - type: string - pattern: ^.* - x-kubernetes-int-or-string: true - type: array - selector: - description: "Selector is an optional field that contains - a selector expression (see Policy for sample syntax). - \ Only traffic that originates from (terminates at) endpoints - matching the selector will be matched. \n Note that: in - addition to the negated version of the Selector (see NotSelector - below), the selector expression syntax itself supports - negation. The two types of negation are subtly different. - One negates the set of matched endpoints, the other negates - the whole match: \n \tSelector = \"!has(my_label)\" matches - packets that are from other Calico-controlled \tendpoints - that do not have the label \"my_label\". \n \tNotSelector - = \"has(my_label)\" matches packets that are not from - Calico-controlled \tendpoints that do have the label \"my_label\". - \n The effect is that the latter will accept packets from - non-Calico sources whereas the former is limited to packets - from Calico-controlled endpoints." - type: string - serviceAccounts: - description: ServiceAccounts is an optional field that restricts - the rule to only apply to traffic that originates from - (or terminates at) a pod running as a matching service - account. - properties: - names: - description: Names is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account whose name is in the list. - items: - type: string - type: array - selector: - description: Selector is an optional field that restricts - the rule to only apply to traffic that originates - from (or terminates at) a pod running as a service - account that matches the given label selector. If - both Names and Selector are specified then they are - AND'ed. - type: string - type: object - services: - description: "Services is an optional field that contains - options for matching Kubernetes Services. If specified, - only traffic that originates from or terminates at endpoints - within the selected service(s) will be matched, and only - to/from each endpoint's port. \n Services cannot be specified - on the same rule as Selector, NotSelector, NamespaceSelector, - Nets, NotNets or ServiceAccounts. \n Ports and NotPorts - can only be specified with Services on ingress rules." - properties: - name: - description: Name specifies the name of a Kubernetes - Service to match. - type: string - namespace: - description: Namespace specifies the namespace of the - given Service. If left empty, the rule will match - within this policy's namespace. - type: string - type: object - type: object - required: - - action - type: object - type: array - order: - description: Order is an optional field that specifies the order in - which the policy is applied. Policies with higher "order" are applied - after those with lower order. If the order is omitted, it may be - considered to be "infinite" - i.e. the policy will be applied last. Policies - with identical order will be applied in alphanumerical order based - on the Policy "Name". - type: number - selector: - description: "The selector is an expression used to pick pick out - the endpoints that the policy should be applied to. \n Selector - expressions follow this syntax: \n \tlabel == \"string_literal\" - \ -> comparison, e.g. my_label == \"foo bar\" \tlabel != \"string_literal\" - \ -> not equal; also matches if label is not present \tlabel in - { \"a\", \"b\", \"c\", ... } -> true if the value of label X is - one of \"a\", \"b\", \"c\" \tlabel not in { \"a\", \"b\", \"c\", - ... } -> true if the value of label X is not one of \"a\", \"b\", - \"c\" \thas(label_name) -> True if that label is present \t! expr - -> negation of expr \texpr && expr -> Short-circuit and \texpr - || expr -> Short-circuit or \t( expr ) -> parens for grouping \tall() - or the empty selector -> matches all endpoints. \n Label names are - allowed to contain alphanumerics, -, _ and /. String literals are - more permissive but they do not support escape characters. \n Examples - (with made-up labels): \n \ttype == \"webserver\" && deployment - == \"prod\" \ttype in {\"frontend\", \"backend\"} \tdeployment != - \"dev\" \t! has(label_name)" - type: string - serviceAccountSelector: - description: ServiceAccountSelector is an optional field for an expression - used to select a pod based on service accounts. - type: string - types: - description: "Types indicates whether this policy applies to ingress, - or to egress, or to both. When not explicitly specified (and so - the value on creation is empty or nil), Calico defaults Types according - to what Ingress and Egress are present in the policy. The default - is: \n - [ PolicyTypeIngress ], if there are no Egress rules (including - the case where there are also no Ingress rules) \n - [ PolicyTypeEgress - ], if there are Egress rules but no Ingress rules \n - [ PolicyTypeIngress, - PolicyTypeEgress ], if there are both Ingress and Egress rules. - \n When the policy is read back again, Types will always be one - of these values, never empty or nil." - items: - description: PolicyType enumerates the possible values of the PolicySpec - Types field. - type: string - type: array - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] ---- -# Source: calico/templates/kdd-crds.yaml -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - name: networksets.crd.projectcalico.org -spec: - group: crd.projectcalico.org - names: - kind: NetworkSet - listKind: NetworkSetList - plural: networksets - singular: networkset - preserveUnknownFields: false - scope: Namespaced - versions: - - name: v1 - schema: - openAPIV3Schema: - description: NetworkSet is the Namespaced-equivalent of the GlobalNetworkSet. - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this representation - of an object. Servers should convert recognized schemas to the latest - internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: NetworkSetSpec contains the specification for a NetworkSet - resource. - properties: - nets: - description: The list of IP networks that belong to this set. - items: - type: string - type: array - type: object - type: object - served: true - storage: true -status: - acceptedNames: - kind: "" - plural: "" - conditions: [] - storedVersions: [] ---- -# Source: calico/templates/calico-kube-controllers-rbac.yaml -# Include a clusterrole for the kube-controllers component, -# and bind it to the calico-kube-controllers serviceaccount. -kind: ClusterRole -apiVersion: rbac.authorization.k8s.io/v1 -metadata: - name: calico-kube-controllers -rules: - # Nodes are watched to monitor for deletions. - - apiGroups: [""] - resources: - - nodes - verbs: - - watch - - list - - get - # Pods are watched to check for existence as part of IPAM controller. - - apiGroups: [""] - resources: - - pods - verbs: - - get - - list - - watch - # IPAM resources are manipulated in response to node and block updates, as well as periodic triggers. - - apiGroups: ["crd.projectcalico.org"] - resources: - - ipreservations - verbs: - - list - - apiGroups: ["crd.projectcalico.org"] - resources: - - blockaffinities - - ipamblocks - - ipamhandles - verbs: - - get - - list - - create - - update - - delete - - watch - # Pools are watched to maintain a mapping of blocks to IP pools. - - apiGroups: ["crd.projectcalico.org"] - resources: - - ippools - verbs: - - list - - watch - # kube-controllers manages hostendpoints. - - apiGroups: ["crd.projectcalico.org"] - resources: - - hostendpoints - verbs: - - get - - list - - create - - update - - delete - # Needs access to update clusterinformations. - - apiGroups: ["crd.projectcalico.org"] - resources: - - clusterinformations - verbs: - - get - - list - - create - - update - - watch - # KubeControllersConfiguration is where it gets its config - - apiGroups: ["crd.projectcalico.org"] - resources: - - kubecontrollersconfigurations - verbs: - # read its own config - - get - # create a default if none exists - - create - # update status - - update - # watch for changes - - watch ---- -# Source: calico/templates/calico-node-rbac.yaml -# Include a clusterrole for the calico-node DaemonSet, -# and bind it to the calico-node serviceaccount. -kind: ClusterRole -apiVersion: rbac.authorization.k8s.io/v1 -metadata: - name: calico-node -rules: - # Used for creating service account tokens to be used by the CNI plugin - - apiGroups: [""] - resources: - - serviceaccounts/token - resourceNames: - - calico-node - verbs: - - create - # The CNI plugin needs to get pods, nodes, and namespaces. - - apiGroups: [""] - resources: - - pods - - nodes - - namespaces - verbs: - - get - # EndpointSlices are used for Service-based network policy rule - # enforcement. - - apiGroups: ["discovery.k8s.io"] - resources: - - endpointslices - verbs: - - watch - - list - - apiGroups: [""] - resources: - - endpoints - - services - verbs: - # Used to discover service IPs for advertisement. - - watch - - list - # Used to discover Typhas. - - get - # Pod CIDR auto-detection on kubeadm needs access to config maps. - - apiGroups: [""] - resources: - - configmaps - verbs: - - get - - apiGroups: [""] - resources: - - nodes/status - verbs: - # Needed for clearing NodeNetworkUnavailable flag. - - patch - # Calico stores some configuration information in node annotations. - - update - # Watch for changes to Kubernetes NetworkPolicies. - - apiGroups: ["networking.k8s.io"] - resources: - - networkpolicies - verbs: - - watch - - list - # Used by Calico for policy information. - - apiGroups: [""] - resources: - - pods - - namespaces - - serviceaccounts - verbs: - - list - - watch - # The CNI plugin patches pods/status. - - apiGroups: [""] - resources: - - pods/status - verbs: - - patch - # Calico monitors various CRDs for config. - - apiGroups: ["crd.projectcalico.org"] - resources: - - globalfelixconfigs - - felixconfigurations - - bgppeers - - globalbgpconfigs - - bgpconfigurations - - ippools - - ipreservations - - ipamblocks - - globalnetworkpolicies - - globalnetworksets - - networkpolicies - - networksets - - clusterinformations - - hostendpoints - - blockaffinities - - caliconodestatuses - verbs: - - get - - list - - watch - # Calico must create and update some CRDs on startup. - - apiGroups: ["crd.projectcalico.org"] - resources: - - ippools - - felixconfigurations - - clusterinformations - verbs: - - create - - update - # Calico must update some CRDs. - - apiGroups: [ "crd.projectcalico.org" ] - resources: - - caliconodestatuses - verbs: - - update - # Calico stores some configuration information on the node. - - apiGroups: [""] - resources: - - nodes - verbs: - - get - - list - - watch - # These permissions are only required for upgrade from v2.6, and can - # be removed after upgrade or on fresh installations. - - apiGroups: ["crd.projectcalico.org"] - resources: - - bgpconfigurations - - bgppeers - verbs: - - create - - update - # These permissions are required for Calico CNI to perform IPAM allocations. - - apiGroups: ["crd.projectcalico.org"] - resources: - - blockaffinities - - ipamblocks - - ipamhandles - verbs: - - get - - list - - create - - update - - delete - # The CNI plugin and calico/node need to be able to create a default - # IPAMConfiguration - - apiGroups: ["crd.projectcalico.org"] - resources: - - ipamconfigs - verbs: - - get - - create - # Block affinities must also be watchable by confd for route aggregation. - - apiGroups: ["crd.projectcalico.org"] - resources: - - blockaffinities - verbs: - - watch - # The Calico IPAM migration needs to get daemonsets. These permissions can be - # removed if not upgrading from an installation using host-local IPAM. - - apiGroups: ["apps"] - resources: - - daemonsets - verbs: - - get ---- -# Source: calico/templates/calico-kube-controllers-rbac.yaml -kind: ClusterRoleBinding -apiVersion: rbac.authorization.k8s.io/v1 -metadata: - name: calico-kube-controllers -roleRef: - apiGroup: rbac.authorization.k8s.io - kind: ClusterRole - name: calico-kube-controllers -subjects: -- kind: ServiceAccount - name: calico-kube-controllers - namespace: kube-system ---- -# Source: calico/templates/calico-node-rbac.yaml -apiVersion: rbac.authorization.k8s.io/v1 -kind: ClusterRoleBinding -metadata: - name: calico-node -roleRef: - apiGroup: rbac.authorization.k8s.io - kind: ClusterRole - name: calico-node -subjects: -- kind: ServiceAccount - name: calico-node - namespace: kube-system ---- -# Source: calico/templates/calico-node.yaml -# This manifest installs the calico-node container, as well -# as the CNI plugins and network config on -# each master and worker node in a Kubernetes cluster. -# -# The following modifications have been made: -# -# - The cnibin volume hostPath is made variable -# - The UPDATE_CNI_BINARIES environment variable is set to 'false' -kind: DaemonSet -apiVersion: apps/v1 -metadata: - name: calico-node - namespace: kube-system - labels: - k8s-app: calico-node -spec: - selector: - matchLabels: - k8s-app: calico-node - updateStrategy: - type: RollingUpdate - rollingUpdate: - maxUnavailable: 1 - template: - metadata: - labels: - k8s-app: calico-node - spec: - nodeSelector: - kubernetes.io/os: linux - hostNetwork: true - tolerations: - # Make sure calico-node gets scheduled on all nodes. - - effect: NoSchedule - operator: Exists - # Mark the pod as a critical add-on for rescheduling. - - key: CriticalAddonsOnly - operator: Exists - - effect: NoExecute - operator: Exists - serviceAccountName: calico-node - # Minimize downtime during a rolling upgrade or deletion; tell Kubernetes to do a "force - # deletion": https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods. - terminationGracePeriodSeconds: 0 - priorityClassName: system-node-critical - imagePullSecrets: - - name: registry-local-secret - initContainers: - # This container performs upgrade from host-local IPAM to calico-ipam. - # It can be deleted if this is a fresh installation, or if you have already - # upgraded to use calico-ipam. - - name: upgrade-ipam - image: "{{ local_registry }}/{{ calico_cni_img }}" - command: ["/opt/cni/bin/calico-ipam", "-upgrade"] - envFrom: - - configMapRef: - # Allow KUBERNETES_SERVICE_HOST and KUBERNETES_SERVICE_PORT to be overridden for eBPF mode. - name: kubernetes-services-endpoint - optional: true - env: - - name: KUBERNETES_NODE_NAME - valueFrom: - fieldRef: - fieldPath: spec.nodeName - - name: CALICO_NETWORKING_BACKEND - valueFrom: - configMapKeyRef: - name: calico-config - key: calico_backend - volumeMounts: - - mountPath: /var/lib/cni/networks - name: host-local-net-dir - - mountPath: /host/opt/cni/bin - name: cni-bin-dir - securityContext: - privileged: true - # This container installs the CNI binaries - # and CNI network config file on each node. - - name: install-cni - image: "{{ local_registry }}/{{ calico_cni_img }}" - command: ["/opt/cni/bin/install"] - envFrom: - - configMapRef: - # Allow KUBERNETES_SERVICE_HOST and KUBERNETES_SERVICE_PORT to be overridden for eBPF mode. - name: kubernetes-services-endpoint - optional: true - env: - # Name of the CNI config file to create. - - name: CNI_CONF_NAME - value: "10-calico.conflist" - # The CNI network config to install on each node. - - name: CNI_NETWORK_CONFIG - valueFrom: - configMapKeyRef: - name: calico-config - key: cni_network_config - # Set the hostname based on the k8s node name. - - name: KUBERNETES_NODE_NAME - valueFrom: - fieldRef: - fieldPath: spec.nodeName - # CNI MTU Config variable - - name: CNI_MTU - valueFrom: - configMapKeyRef: - name: calico-config - key: veth_mtu - # Prevents the container from sleeping forever. - - name: SLEEP - value: "false" - # Prevents any existing CNI plugins from being updated - - name: UPDATE_CNI_BINARIES - value: "false" - volumeMounts: - - mountPath: /host/opt/cni/bin - name: cni-bin-dir - - mountPath: /host/etc/cni/net.d - name: cni-net-dir - securityContext: - privileged: true - # This init container mounts the necessary filesystems needed by the BPF data plane - # i.e. bpf at /sys/fs/bpf and cgroup2 at /run/calico/cgroup. Calico-node initialisation is executed - # in best effort fashion, i.e. no failure for errors, to not disrupt pod creation in iptable mode. - - name: "mount-bpffs" - image: "{{ local_registry }}/{{ calico_node_img }}" - command: ["calico-node", "-init", "-best-effort"] - volumeMounts: - - mountPath: /sys/fs - name: sys-fs - # Bidirectional is required to ensure that the new mount we make at /sys/fs/bpf propagates to the host - # so that it outlives the init container. - mountPropagation: Bidirectional - - mountPath: /var/run/calico - name: var-run-calico - # Bidirectional is required to ensure that the new mount we make at /run/calico/cgroup propagates to the host - # so that it outlives the init container. - mountPropagation: Bidirectional - # Mount /proc/ from host which usually is an init program at /nodeproc. It's needed by mountns binary, - # executed by calico-node, to mount root cgroup2 fs at /run/calico/cgroup to attach CTLB programs correctly. - - mountPath: /nodeproc - name: nodeproc - readOnly: true - securityContext: - privileged: true - containers: - # Runs calico-node container on each Kubernetes node. This - # container programs network policy and routes on each - # host. - - name: calico-node - image: "{{ local_registry }}/{{ calico_node_img }}" - envFrom: - - configMapRef: - # Allow KUBERNETES_SERVICE_HOST and KUBERNETES_SERVICE_PORT to be overridden for eBPF mode. - name: kubernetes-services-endpoint - optional: true - env: - # Configure inbound failsafe rules - - name: FELIX_FAILSAFEINBOUNDHOSTPORTS - value: "tcp:22, udp:68, tcp:179, tcp:6443" - # Configure output failsafe rules - - name: FELIX_FAILSAFEOUTBOUNDHOSTPORTS - value: "udp:53, udp:67, tcp:179, tcp:6443" - # Use Kubernetes API as the backing datastore. - - name: DATASTORE_TYPE - value: "kubernetes" - # Wait for the datastore. - - name: WAIT_FOR_DATASTORE - value: "true" - # Set based on the k8s node name. - - name: NODENAME - valueFrom: - fieldRef: - fieldPath: spec.nodeName - # Choose the backend to use. - - name: CALICO_NETWORKING_BACKEND - valueFrom: - configMapKeyRef: - name: calico-config - key: calico_backend - # Cluster type to identify the deployment type - - name: CLUSTER_TYPE - value: "k8s,bgp" - {% if cluster_network_ipv4 -%} - # Auto-detect the BGP IP address. - - name: IP - value: "autodetect" - - name: IP_AUTODETECTION_METHOD - value: "can-reach={{ controller_0_cluster_host }}" - {% else -%} - # Disable IPv4 - - name: IP - value: "none" - {% endif -%} - {% if cluster_network_ipv6 -%} - - name: IP6 - value: "autodetect" - - name: IP6_AUTODETECTION_METHOD - value: "can-reach={{ controller_0_cluster_host }}" - {% else -%} - # Disable IPv6 - - name: IP6 - value: "none" - {% endif -%} - # Set MTU for tunnel device used if ipip is enabled - - name: FELIX_IPINIPMTU - valueFrom: - configMapKeyRef: - name: calico-config - key: veth_mtu - # Set MTU for the VXLAN tunnel device. - - name: FELIX_VXLANMTU - valueFrom: - configMapKeyRef: - name: calico-config - key: veth_mtu - # Set MTU for the Wireguard tunnel device. - - name: FELIX_WIREGUARDMTU - valueFrom: - configMapKeyRef: - name: calico-config - key: veth_mtu - # The default IPv4 pool to create on startup if none exists. Pod IPs will be - # chosen from this range. Changing this value after installation will have - # no effect. This should fall within `--cluster-cidr`. - # - name: CALICO_IPV4POOL_CIDR - # value: "192.168.0.0/16" - # Disable file logging so `kubectl logs` works. - - name: CALICO_DISABLE_FILE_LOGGING - value: "true" - # Set calico node log level to "warning" - - name: CALICO_STARTUP_LOGLEVEL - value: "warning" - # Set Felix endpoint to host default action to ACCEPT. - - name: FELIX_DEFAULTENDPOINTTOHOSTACTION - value: "ACCEPT" - {% if cluster_network_ipv6 -%} - # Enable IPv6 on Kubernetes. - - name: FELIX_IPV6SUPPORT - value: "true" - - name: CALICO_ROUTER_ID - value: "hash" - {% else -%} - # Disable IPv6 on Kubernetes. - - name: FELIX_IPV6SUPPORT - value: "false" - {% endif -%} - - name: FELIX_HEALTHENABLED - value: "true" - # Set Felix logging to "warning" - - name: FELIX_LOGSEVERITYSCREEN - value: "warning" - # Set Felix iptables backend to use auto-selection - - name: FELIX_IPTABLESBACKEND - value: "Auto" - - name: NO_DEFAULT_POOLS - value: "true" - securityContext: - privileged: true - resources: - requests: - cpu: 0 - lifecycle: - preStop: - exec: - command: - - /bin/calico-node - - -shutdown - livenessProbe: - exec: - command: - - /bin/calico-node - - -felix-live - - -bird-live - periodSeconds: 10 - initialDelaySeconds: 10 - failureThreshold: 6 - timeoutSeconds: 10 - readinessProbe: - exec: - command: - - /bin/calico-node - - -felix-ready - - -bird-ready - periodSeconds: 10 - timeoutSeconds: 10 - volumeMounts: - # For maintaining CNI plugin API credentials. - - mountPath: /host/etc/cni/net.d - name: cni-net-dir - readOnly: false - - mountPath: /lib/modules - name: lib-modules - readOnly: true - - mountPath: /run/xtables.lock - name: xtables-lock - readOnly: false - - mountPath: /var/run/calico - name: var-run-calico - readOnly: false - - mountPath: /var/lib/calico - name: var-lib-calico - readOnly: false - - name: policysync - mountPath: /var/run/nodeagent - # For eBPF mode, we need to be able to mount the BPF filesystem at /sys/fs/bpf so we mount in the - # parent directory. - - name: bpffs - mountPath: /sys/fs/bpf - - name: cni-log-dir - mountPath: /var/log/calico/cni - readOnly: true - volumes: - # Used by calico-node. - - name: lib-modules - hostPath: - path: /lib/modules - - name: var-run-calico - hostPath: - path: /var/run/calico - - name: var-lib-calico - hostPath: - path: /var/lib/calico - - name: xtables-lock - hostPath: - path: /run/xtables.lock - type: FileOrCreate - - name: sys-fs - hostPath: - path: /sys/fs/ - type: DirectoryOrCreate - - name: bpffs - hostPath: - path: /sys/fs/bpf - type: Directory - # mount /proc at /nodeproc to be used by mount-bpffs initContainer to mount root cgroup2 fs. - - name: nodeproc - hostPath: - path: /proc - # Used to install CNI. - - name: cni-bin-dir - hostPath: - path: {{ kubelet_cni_bin_dir }} - - name: cni-net-dir - hostPath: - path: /etc/cni/net.d - # Used to access CNI logs. - - name: cni-log-dir - hostPath: - path: /var/log/calico/cni - # Mount in the directory for host-local IPAM allocations. This is - # used when upgrading from host-local to calico-ipam, and can be removed - # if not using the upgrade-ipam init container. - - name: host-local-net-dir - hostPath: - path: /var/lib/cni/networks - # Used to create per-pod Unix Domain Sockets - - name: policysync - hostPath: - type: DirectoryOrCreate - path: /var/run/nodeagent ---- -# Source: calico/templates/calico-kube-controllers.yaml -# See https://github.com/projectcalico/kube-controllers -apiVersion: apps/v1 -kind: Deployment -metadata: - name: calico-kube-controllers - namespace: kube-system - labels: - k8s-app: calico-kube-controllers -spec: - # The controllers can only have a single active instance. - replicas: 1 - selector: - matchLabels: - k8s-app: calico-kube-controllers - strategy: - type: Recreate - template: - metadata: - name: calico-kube-controllers - namespace: kube-system - labels: - k8s-app: calico-kube-controllers - spec: - nodeSelector: - kubernetes.io/os: linux - tolerations: - # Mark the pod as a critical add-on for rescheduling. - - key: CriticalAddonsOnly - operator: Exists - - key: node-role.kubernetes.io/master - effect: NoSchedule - - key: node-role.kubernetes.io/control-plane - effect: NoSchedule - serviceAccountName: calico-kube-controllers - priorityClassName: system-cluster-critical - imagePullSecrets: - - name: registry-local-secret - containers: - - name: calico-kube-controllers - image: "{{ local_registry }}/{{ calico_kube_controllers_img }}" - env: - # Choose which controllers to run. - - name: ENABLED_CONTROLLERS - value: node - - name: DATASTORE_TYPE - value: kubernetes - livenessProbe: - exec: - command: - - /usr/bin/check-status - - -l - periodSeconds: 10 - initialDelaySeconds: 10 - failureThreshold: 6 - timeoutSeconds: 10 - readinessProbe: - exec: - command: - - /usr/bin/check-status - - -r - periodSeconds: 10 - -{% if cluster_network_ipv4 -%} ---- -apiVersion: crd.projectcalico.org/v1 -kind: IPPool -metadata: - name: default-ipv4-ippool -spec: - cidr: "{{ cluster_pod_subnet }}" - ipipMode: "Always" - natOutgoing: True - vxlanMode: "Never" -{% endif -%} -{% if cluster_network_ipv6 -%} ---- -apiVersion: crd.projectcalico.org/v1 -kind: IPPool -metadata: - name: default-ipv6-ippool -spec: - cidr: "{{ cluster_pod_subnet }}" - natOutgoing: True - vxlanMode: "Never" -{% endif -%} ---- -# Source: calico/templates/calico-etcd-secrets.yaml - ---- -# Source: calico/templates/calico-typha.yaml - ---- -# Source: calico/templates/configure-canal.yaml diff --git a/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.24.4/multus-cni.yaml.j2 b/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.24.4/multus-cni.yaml.j2 deleted file mode 100644 index e0adf1051..000000000 --- a/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.24.4/multus-cni.yaml.j2 +++ /dev/null @@ -1,297 +0,0 @@ ---- -# Multus Version v3.9.2 -# Based on: -# https://raw.githubusercontent.com/k8snetworkplumbingwg/multus-cni/v3.9.2/deployments/ -# multus-daemonset.yml -# -# This file is licensed under Apache 2.0. You can obtain a copy of the license at: -# https://github.com/k8snetworkplumbingwg/multus-cni/blob/v3.9.2/LICENSE -# -# The following modifications have been made: -# -# - The multus CNI configuration file has been explicitly specified to ensure -# it has a lower lexographic order than the calico CNI configuration file. -# - The configMap has been modified to work with Calico rather than Flannel -# - The tuning plugin is used to update sysctl tcp_keepalive timers. -# - The portmap plugin is enabled to allow forwarding from one or more ports -# on the host to the container -# - The cnibin volume hostPath is made variable -# - An updateStrategy was added to the DaemonSet spec to allow controlled template -# updates of pods with "kubectl apply". -# - The attributes confDir, cniDir and binDir are added to the configmap of -# multus-cni-config. -# - Due to the limitations on resource tracking and CPU usage in Kubernetes, -# platform pod's CPU requests are set to zero and must not request CPU resources. -# -# Copyright (c) 2022 Wind River Systems, Inc. -# -# SPDX-License-Identifier: Apache-2.0 -# -apiVersion: apiextensions.k8s.io/v1 -kind: CustomResourceDefinition -metadata: - name: network-attachment-definitions.k8s.cni.cncf.io -spec: - group: k8s.cni.cncf.io - scope: Namespaced - names: - plural: network-attachment-definitions - singular: network-attachment-definition - kind: NetworkAttachmentDefinition - shortNames: - - net-attach-def - versions: - - name: v1 - served: true - storage: true - schema: - openAPIV3Schema: - description: 'NetworkAttachmentDefinition is a CRD schema specified by the Network Plumbing - Working Group to express the intent for attaching pods to one or more logical or physical - networks. More information available at: https://github.com/k8snetworkplumbingwg/multi-net-spec' - type: object - properties: - apiVersion: - description: 'APIVersion defines the versioned schema of this represen - tation of an object. Servers should convert recognized schemas to the - latest internal value, and may reject unrecognized values. More info: - https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' - type: string - kind: - description: 'Kind is a string value representing the REST resource this - object represents. Servers may infer this from the endpoint the client - submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' - type: string - metadata: - type: object - spec: - description: 'NetworkAttachmentDefinition spec defines the desired state of a network attachment' - type: object - properties: - config: - description: 'NetworkAttachmentDefinition config is a JSON-formatted CNI configuration' - type: string ---- -kind: ClusterRole -apiVersion: rbac.authorization.k8s.io/v1 -metadata: - name: multus -rules: - - apiGroups: ["k8s.cni.cncf.io"] - resources: - - '*' - verbs: - - '*' - - apiGroups: - - "" - resources: - - pods - - pods/status - verbs: - - get - - update - - apiGroups: - - "" - - events.k8s.io - resources: - - events - verbs: - - create - - patch - - update ---- -kind: ClusterRoleBinding -apiVersion: rbac.authorization.k8s.io/v1 -metadata: - name: multus -roleRef: - apiGroup: rbac.authorization.k8s.io - kind: ClusterRole - name: multus -subjects: -- kind: ServiceAccount - name: multus - namespace: kube-system ---- -apiVersion: v1 -kind: ServiceAccount -metadata: - name: multus - namespace: kube-system ---- -kind: ConfigMap -apiVersion: v1 -metadata: - name: multus-cni-config.v1 - namespace: kube-system - labels: - tier: node - app: multus -data: - # NOTE: If you'd prefer to manually apply a configuration file, you may create one here. - # In the case you'd like to customize the Multus installation, you should change the arguments to the Multus pod - # change the "args" line below from - # - "--multus-conf-file=auto" - # to: - # "--multus-conf-file=/tmp/multus-conf/70-multus.conf" - # Additionally -- you should ensure that the name "70-multus.conf" is the alphabetically first name in the - # /etc/cni/net.d/ directory on each node, otherwise, it will not be used by the Kubelet. - cni-conf.json: | - { - "name": "multus-cni-network", - "type": "multus", - "cniVersion": "0.3.1", - "confDir": "/etc/cni/net.d", - "cniDir": "/var/lib/cni/multus", - "binDir": "/var/opt/cni/bin", - "logFile": "/var/log/multus.log", - "logLevel": "debug", - "capabilities": { - "portMappings": true - }, - "delegates": [ - { - "cniVersion": "0.3.1", - "name": "chain", - "plugins": [ - { - "cniVersion": "0.3.1", - "name": "k8s-pod-network", - "type": "calico", - "masterplugin": true, - "log_level": "info", - "datastore_type": "kubernetes", - "nodename": "__KUBERNETES_NODE_NAME__", - "mtu": 1500, - "ipam": { - "type": "calico-ipam", - "assign_ipv4": "{{ "true" if cluster_network_ipv4 else "false" }}", - "assign_ipv6": "{{ "true" if cluster_network_ipv6 else "false" }}" - }, - "policy": { - "type": "k8s" - }, - "kubernetes": { - "kubeconfig": "/etc/cni/net.d/calico-kubeconfig" - } - }, - { - "name": "sysctl-tuning", - "type": "tuning", - "sysctl": { - "net.ipv4.tcp_keepalive_intvl": "1", - "net.ipv4.tcp_keepalive_probes": "5", - "net.ipv4.tcp_keepalive_time": "5" - } - }, - { - "type": "portmap", - "snat": true, - "capabilities": { - "portMappings": true - } - } - ] - } - ], - "kubeconfig": "/etc/cni/net.d/multus.d/multus.kubeconfig" - } ---- -apiVersion: apps/v1 -kind: DaemonSet -metadata: - name: kube-multus-ds-amd64 - namespace: kube-system - labels: - tier: node - app: multus - name: multus -spec: - selector: - matchLabels: - name: multus - updateStrategy: - type: RollingUpdate - rollingUpdate: - maxUnavailable: 1 - template: - metadata: - labels: - tier: node - app: multus - name: multus - spec: - hostNetwork: true - nodeSelector: - kubernetes.io/arch: amd64 - tolerations: - - operator: Exists - effect: NoSchedule - - operator: Exists - effect: NoExecute - serviceAccountName: multus - imagePullSecrets: - - name: registry-local-secret - containers: - - name: kube-multus - image: "{{ local_registry }}/{{ multus_img }}" - env: - - name: KUBERNETES_NODE_NAME - valueFrom: - fieldRef: - fieldPath: spec.nodeName - command: - - /bin/bash - - -cex - - | - #!/bin/bash - sed "s|__KUBERNETES_NODE_NAME__|${KUBERNETES_NODE_NAME}|g" /tmp/multus-conf/05-multus.conf > /usr/src/multus-cni/05-multus.conf - {% if cluster_network_ipv6 -%} - sed -i 's#//\${KUBERNETES_SERVICE_HOST}#//\[\${KUBERNETES_SERVICE_HOST}\]#' /entrypoint.sh - {% endif -%} - /entrypoint.sh --multus-conf-file=/usr/src/multus-cni/05-multus.conf - resources: - requests: - memory: "50Mi" - limits: - memory: "50Mi" - securityContext: - privileged: true - volumeMounts: - - name: cni - mountPath: /host/etc/cni/net.d - - name: cnibin - mountPath: /host/opt/cni/bin - - name: multus-cfg - mountPath: /tmp/multus-conf - initContainers: - - name: install-multus-binary - image: "{{ local_registry }}/{{ multus_img }}" - command: - - "cp" - - "/usr/src/multus-cni/bin/multus" - - "/host/opt/cni/bin/multus" - resources: - requests: - cpu: 0 - memory: "15Mi" - securityContext: - privileged: true - volumeMounts: - - name: cnibin - mountPath: /host/opt/cni/bin - mountPropagation: Bidirectional - terminationGracePeriodSeconds: 10 - volumes: - - name: cni - hostPath: - path: /etc/cni/net.d - - name: cnibin - hostPath: - path: {{ kubelet_cni_bin_dir }} - - name: multus-cfg - configMap: - name: multus-cni-config.v1 - items: - - key: cni-conf.json - path: 05-multus.conf diff --git a/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.24.4/sriov-cni.yaml.j2 b/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.24.4/sriov-cni.yaml.j2 deleted file mode 100644 index d05c30589..000000000 --- a/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.24.4/sriov-cni.yaml.j2 +++ /dev/null @@ -1,77 +0,0 @@ -# SRIOV-CNI Release v2 -# Based on: -# https://raw.githubusercontent.com/k8snetworkplumbingwg/sriov-cni/v2.6.3/images/k8s-v1.16/ -# sriov-cni-daemonset.yaml -# -# This file is licensed under Apache 2.0. You can obtain a copy of the license at: -# https://github.com/k8snetworkplumbingwg/sriov-cni/blob/v2.6.3/LICENSE -# -# The following modifications have been made: -# -# - The daemonset is modified to tolerate all NoSchedule taints -# - The cnibin volume hostPath is made variable -# - An updateStrategy was added to the DaemonSet spec to allow controlled template -# updates of pods with "kubectl apply". -# - The image is set to a stable starlingX version -# - The 'imagePullPolicy: Never' is omitted -# - For k8s 1.19, the matchLabels are the same as the k8s 1.18 labels to -# allow a rolling update to succeed. -# -# Copyright (c) 2022 Wind River Systems, Inc. -# -# SPDX-License-Identifier: Apache-2.0 -# ---- -apiVersion: apps/v1 -kind: DaemonSet -metadata: - name: kube-sriov-cni-ds-amd64 - namespace: kube-system - labels: - tier: node - app: sriov-cni -spec: - selector: - matchLabels: - tier: node - app: sriov-cni - updateStrategy: - type: RollingUpdate - rollingUpdate: - maxUnavailable: 1 - template: - metadata: - labels: - name: sriov-cni - tier: node - app: sriov-cni - spec: - nodeSelector: - kubernetes.io/arch: amd64 - tolerations: - - operator: Exists - effect: NoSchedule - imagePullSecrets: - - name: registry-local-secret - containers: - - name: kube-sriov-cni - image: "{{ local_registry }}/{{ sriov_cni_img }}" - securityContext: - allowPrivilegeEscalation: false - privileged: false - readOnlyRootFilesystem: true - capabilities: - drop: - - ALL - resources: - requests: - memory: "50Mi" - limits: - memory: "50Mi" - volumeMounts: - - name: cnibin - mountPath: /host/opt/cni/bin - volumes: - - name: cnibin - hostPath: - path: {{ kubelet_cni_bin_dir }} diff --git a/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.24.4/sriov-plugin.yaml.j2 b/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.24.4/sriov-plugin.yaml.j2 deleted file mode 100644 index 086d2a8ab..000000000 --- a/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.24.4/sriov-plugin.yaml.j2 +++ /dev/null @@ -1,111 +0,0 @@ -# SRIOV device CNI plugin version 3.5.1 -# Based on: -# https://raw.githubusercontent.com/k8snetworkplumbingwg/sriov-network-device-plugin/v3.5.1/ -# deployments/k8s-v1.16/sriovdp-daemonset.yaml -# -# This file is licensed under Apache 2.0. You can obtain a copy of the license at: -# https://github.com/k8snetworkplumbingwg/sriov-network-device-plugin/blob/v3.5.1/LICENSE -# -# The following modifications have been made: -# -# - A nodeSelector of 'sriovdp' has been added to ensure the sriov device plugin -# pods only run on appropriately labelled nodes. -# - The config hostPath is explicitly set to 'File' -# - The daemonset is modified to tolerate all NoSchedule taints -# - An updateStrategy was added to the DaemonSet spec to allow controlled template -# updates of pods with "kubectl apply". -# - The image is set to a stable starlingX version -# - The default configMap is not used. Rather, a hostPath to the config.json file -# is used, as resources are populated and based on datanetwork names. -# - For k8s 1.19, the matchLabels are the same as the k8s 1.18 labels to -# allow a rolling update to succeed. -# - Set CPU requests to 0 -# -# Copyright (c) 2022 Wind River Systems, Inc. -# -# SPDX-License-Identifier: Apache-2.0 -# ---- -apiVersion: v1 -kind: ServiceAccount -metadata: - name: sriov-device-plugin - namespace: kube-system - ---- -apiVersion: apps/v1 -kind: DaemonSet -metadata: - name: kube-sriov-device-plugin-amd64 - namespace: kube-system - labels: - tier: node - app: sriovdp -spec: - selector: - matchLabels: - tier: node - app: sriovdp - updateStrategy: - type: RollingUpdate - rollingUpdate: - maxUnavailable: 1 - template: - metadata: - labels: - name: sriov-device-plugin - tier: node - app: sriovdp - spec: - hostNetwork: true - nodeSelector: - beta.kubernetes.io/arch: amd64 - sriovdp: enabled - tolerations: - - operator: Exists - effect: NoSchedule - serviceAccountName: sriov-device-plugin - imagePullSecrets: - - name: registry-local-secret - containers: - - name: kube-sriovdp - image: "{{ local_registry }}/{{ sriov_network_device_img }}" - imagePullPolicy: IfNotPresent - args: - - --log-dir=sriovdp - - --log-level=10 - securityContext: - privileged: true - resources: - requests: - cpu: 0 - memory: "40Mi" - limits: - cpu: 1 - memory: "200Mi" - volumeMounts: - - name: devicesock - mountPath: /var/lib/kubelet/device-plugins/ - readOnly: false - - name: log - mountPath: /var/log - - name: config - mountPath: /etc/pcidp/config.json - readOnly: true - - name: device-info - mountPath: /var/run/k8s.cni.cncf.io/devinfo/dp - volumes: - - name: devicesock - hostPath: - path: /var/lib/kubelet/device-plugins/ - - name: log - hostPath: - path: /var/log - - name: device-info - hostPath: - path: /var/run/k8s.cni.cncf.io/devinfo/dp - type: DirectoryOrCreate - - name: config - hostPath: - path: /etc/pcidp/config.json - type: File diff --git a/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.25.3 b/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.25.3 index 464eed534..78ecdec70 120000 --- a/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.25.3 +++ b/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.25.3 @@ -1 +1 @@ -k8s-v1.26.1 \ No newline at end of file +k8s-v1.28.4 \ No newline at end of file diff --git a/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.26.1 b/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.26.1 new file mode 120000 index 000000000..78ecdec70 --- /dev/null +++ b/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.26.1 @@ -0,0 +1 @@ +k8s-v1.28.4 \ No newline at end of file diff --git a/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.27.5 b/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.27.5 index 464eed534..78ecdec70 120000 --- a/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.27.5 +++ b/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.27.5 @@ -1 +1 @@ -k8s-v1.26.1 \ No newline at end of file +k8s-v1.28.4 \ No newline at end of file diff --git a/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.28.4 b/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.28.4 deleted file mode 120000 index 464eed534..000000000 --- a/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.28.4 +++ /dev/null @@ -1 +0,0 @@ -k8s-v1.26.1 \ No newline at end of file diff --git a/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.26.1/calico-cni.yaml.j2 b/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.28.4/calico-cni.yaml.j2 similarity index 97% rename from playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.26.1/calico-cni.yaml.j2 rename to playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.28.4/calico-cni.yaml.j2 index d3eb2db04..5e8fd654e 100644 --- a/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.26.1/calico-cni.yaml.j2 +++ b/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.28.4/calico-cni.yaml.j2 @@ -1,10 +1,10 @@ --- -# Calico Version v3.25.0 +# Calico Version v3.26.4 # Based off: -# https://raw.githubusercontent.com/projectcalico/calico/v3.25.0/manifests/calico.yaml +# https://raw.githubusercontent.com/projectcalico/calico/v3.26.4/manifests/calico.yaml # # This file is licensed under Apache 2.0. You can obtain a copy of the license at: -# https://github.com/projectcalico/calico/blob/v3.25.0/calico/LICENSE +# https://github.com/projectcalico/calico/blob/v3.26.4/calico/LICENSE # # The following modifications have been made: # @@ -16,7 +16,7 @@ # - Do not use default ippools. Create them explicitly for ipv4 / ipv6 # - Set CPU requests to 0 # -# Copyright (c) 2023 Wind River Systems, Inc. +# Copyright (c) 2024 Wind River Systems, Inc. # # SPDX-License-Identifier: Apache-2.0 # @@ -71,6 +71,13 @@ metadata: name: calico-node namespace: kube-system --- +# Source: calico/templates/calico-node.yaml +apiVersion: v1 +kind: ServiceAccount +metadata: + name: calico-cni-plugin + namespace: kube-system +--- # Source: calico/templates/calico-config.yaml # This ConfigMap is used to configure a self-hosted Calico installation. kind: ConfigMap @@ -317,6 +324,130 @@ status: # Source: calico/templates/kdd-crds.yaml apiVersion: apiextensions.k8s.io/v1 kind: CustomResourceDefinition +metadata: + annotations: + controller-gen.kubebuilder.io/version: (devel) + creationTimestamp: null + name: bgpfilters.crd.projectcalico.org +spec: + group: crd.projectcalico.org + names: + kind: BGPFilter + listKind: BGPFilterList + plural: bgpfilters + singular: bgpfilter + scope: Cluster + versions: + - name: v1 + schema: + openAPIV3Schema: + properties: + apiVersion: + description: 'APIVersion defines the versioned schema of this representation + of an object. Servers should convert recognized schemas to the latest + internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' + type: string + kind: + description: 'Kind is a string value representing the REST resource this + object represents. Servers may infer this from the endpoint the client + submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' + type: string + metadata: + type: object + spec: + description: BGPFilterSpec contains the IPv4 and IPv6 filter rules of + the BGP Filter. + properties: + exportV4: + description: The ordered set of IPv4 BGPFilter rules acting on exporting + routes to a peer. + items: + description: BGPFilterRuleV4 defines a BGP filter rule consisting + a single IPv4 CIDR block and a filter action for this CIDR. + properties: + action: + type: string + cidr: + type: string + matchOperator: + type: string + required: + - action + - cidr + - matchOperator + type: object + type: array + exportV6: + description: The ordered set of IPv6 BGPFilter rules acting on exporting + routes to a peer. + items: + description: BGPFilterRuleV6 defines a BGP filter rule consisting + a single IPv6 CIDR block and a filter action for this CIDR. + properties: + action: + type: string + cidr: + type: string + matchOperator: + type: string + required: + - action + - cidr + - matchOperator + type: object + type: array + importV4: + description: The ordered set of IPv4 BGPFilter rules acting on importing + routes from a peer. + items: + description: BGPFilterRuleV4 defines a BGP filter rule consisting + a single IPv4 CIDR block and a filter action for this CIDR. + properties: + action: + type: string + cidr: + type: string + matchOperator: + type: string + required: + - action + - cidr + - matchOperator + type: object + type: array + importV6: + description: The ordered set of IPv6 BGPFilter rules acting on importing + routes from a peer. + items: + description: BGPFilterRuleV6 defines a BGP filter rule consisting + a single IPv6 CIDR block and a filter action for this CIDR. + properties: + action: + type: string + cidr: + type: string + matchOperator: + type: string + required: + - action + - cidr + - matchOperator + type: object + type: array + type: object + type: object + served: true + storage: true +status: + acceptedNames: + kind: "" + plural: "" + conditions: [] + storedVersions: [] +--- +# Source: calico/templates/kdd-crds.yaml +apiVersion: apiextensions.k8s.io/v1 +kind: CustomResourceDefinition metadata: name: bgppeers.crd.projectcalico.org spec: @@ -352,6 +483,11 @@ spec: description: The AS Number of the peer. format: int32 type: integer + filters: + description: The ordered set of BGPFilters applied on this BGP peer. + items: + type: string + type: array keepOriginalNextHop: description: Option to keep the original nexthop field when routes are sent to a BGP Peer. Setting "true" configures the selected BGP @@ -898,6 +1034,13 @@ spec: connections. The only reason to disable it is for debugging purposes. [Default: true]' type: boolean + bpfDSROptoutCIDRs: + description: BPFDSROptoutCIDRs is a list of CIDRs which are excluded + from DSR. That is, clients in those CIDRs will accesses nodeports + as if BPFExternalServiceMode was set to Tunnel. + items: + type: string + type: array bpfDataIfacePattern: description: BPFDataIfacePattern is a regular expression that controls which interfaces Felix should attach BPF programs to in order to @@ -921,7 +1064,7 @@ spec: description: 'BPFEnforceRPF enforce strict RPF on all host interfaces with BPF programs regardless of what is the per-interfaces or global setting. Possible values are Disabled, Strict or Loose. [Default: - Strict]' + Loose]' type: string bpfExtToServiceConnmark: description: 'BPFExtToServiceConnmark in BPF mode, control a 32bit @@ -1186,7 +1329,7 @@ spec: type: integer healthTimeoutOverrides: description: HealthTimeoutOverrides allows the internal watchdog timeouts - of individual subcomponents to be overriden. This is useful for + of individual subcomponents to be overridden. This is useful for working around "false positive" liveness timeouts that can occur in particularly stressful workloads or if CPU is constrained. For a list of active subcomponents, see Felix's logs. @@ -1246,6 +1389,12 @@ spec: type: string iptablesFilterAllowAction: type: string + iptablesFilterDenyAction: + description: IptablesFilterDenyAction controls what happens to traffic + that is denied by network policy. By default Calico blocks traffic + with an iptables "DROP" action. If you want to use "REJECT" action + instead you can configure it in here. + type: string iptablesLockFilePath: description: 'IptablesLockFilePath is the location of the iptables lock file. You may need to change this if the lock file is not in @@ -4256,7 +4405,7 @@ rules: resources: - serviceaccounts/token resourceNames: - - calico-node + - calico-cni-plugin verbs: - create # The CNI plugin needs to get pods, nodes, and namespaces. @@ -4273,7 +4422,7 @@ rules: resources: - endpointslices verbs: - - watch + - watch - list - apiGroups: [""] resources: @@ -4327,6 +4476,7 @@ rules: - globalfelixconfigs - felixconfigurations - bgppeers + - bgpfilters - globalbgpconfigs - bgpconfigurations - ippools @@ -4410,6 +4560,41 @@ rules: verbs: - get --- +# Source: calico/templates/calico-node-rbac.yaml +# CNI cluster role +kind: ClusterRole +apiVersion: rbac.authorization.k8s.io/v1 +metadata: + name: calico-cni-plugin +rules: + - apiGroups: [""] + resources: + - pods + - nodes + - namespaces + verbs: + - get + - apiGroups: [""] + resources: + - pods/status + verbs: + - patch + - apiGroups: ["crd.projectcalico.org"] + resources: + - blockaffinities + - ipamblocks + - ipamhandles + - clusterinformations + - ippools + - ipreservations + - ipamconfigs + verbs: + - get + - list + - create + - update + - delete +--- # Source: calico/templates/calico-kube-controllers-rbac.yaml kind: ClusterRoleBinding apiVersion: rbac.authorization.k8s.io/v1 @@ -4438,6 +4623,20 @@ subjects: name: calico-node namespace: kube-system --- +# Source: calico/templates/calico-node-rbac.yaml +apiVersion: rbac.authorization.k8s.io/v1 +kind: ClusterRoleBinding +metadata: + name: calico-cni-plugin +roleRef: + apiGroup: rbac.authorization.k8s.io + kind: ClusterRole + name: calico-cni-plugin +subjects: +- kind: ServiceAccount + name: calico-cni-plugin + namespace: kube-system +--- # Source: calico/templates/calico-node.yaml # This manifest installs the calico-node container, as well # as the CNI plugins and network config on @@ -4699,7 +4898,7 @@ spec: privileged: true resources: requests: - cpu: 0 + cpu: 0 lifecycle: preStop: exec: @@ -4894,4 +5093,3 @@ spec: --- # Source: calico/templates/configure-canal.yaml - diff --git a/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.26.1/multus-cni.yaml.j2 b/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.28.4/multus-cni.yaml.j2 similarity index 85% rename from playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.26.1/multus-cni.yaml.j2 rename to playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.28.4/multus-cni.yaml.j2 index 62eba417a..1b8aecec8 100644 --- a/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.26.1/multus-cni.yaml.j2 +++ b/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.28.4/multus-cni.yaml.j2 @@ -1,11 +1,11 @@ --- -# Multus Version v3.9.3 +# Multus Version v4.0.2 # Based on: -# https://raw.githubusercontent.com/k8snetworkplumbingwg/multus-cni/v3.9.3/deployments/ +# https://raw.githubusercontent.com/k8snetworkplumbingwg/multus-cni/v4.0.2/deployments/ # multus-daemonset.yml # # This file is licensed under Apache 2.0. You can obtain a copy of the license at: -# https://github.com/k8snetworkplumbingwg/multus-cni/blob/v3.9.3/LICENSE +# https://github.com/k8snetworkplumbingwg/multus-cni/blob/v4.0.2/LICENSE # # The following modifications have been made: # @@ -22,8 +22,12 @@ # multus-cni-config. # - Due to the limitations on resource tracking and CPU usage in Kubernetes, # platform pod's CPU requests are set to zero and must not request CPU resources. +# - multus v4.0.2 changes thin container base image to distroless, +# hence using --multus-conf-file=auto instead of custom conf file as done previously. +# - multus v4.0.2 has an issue with nested delegate misconfiguration in the conf file; +# Adding an initContainer that deletes the multus cni configuration on startup. # -# Copyright (c) 2023 Wind River Systems, Inc. +# Copyright (c) 2024 Wind River Systems, Inc. # # SPDX-License-Identifier: Apache-2.0 # @@ -235,21 +239,13 @@ spec: containers: - name: kube-multus image: "{{ local_registry }}/{{ multus_img }}" - env: - - name: KUBERNETES_NODE_NAME - valueFrom: - fieldRef: - fieldPath: spec.nodeName - command: - - /bin/bash - - -cex - - | - #!/bin/bash - sed "s|__KUBERNETES_NODE_NAME__|${KUBERNETES_NODE_NAME}|g" /tmp/multus-conf/05-multus.conf > /usr/src/multus-cni/05-multus.conf - {% if cluster_network_ipv6 -%} - sed -i 's#//\${KUBERNETES_SERVICE_HOST}#//\[\${KUBERNETES_SERVICE_HOST}\]#' /entrypoint.sh - {% endif -%} - /entrypoint.sh --multus-conf-file=/usr/src/multus-cni/05-multus.conf + command: ["/thin_entrypoint"] + args: + - "--multus-conf-file=auto" + - "--multus-autoconfig-dir=/host/etc/cni/net.d" + - "--cni-conf-dir=/host/etc/cni/net.d" + - "--multus-log-file=/var/log/multus.log" + - "--multus-log-level=debug" resources: requests: memory: "50Mi" @@ -267,10 +263,10 @@ spec: initContainers: - name: install-multus-binary image: "{{ local_registry }}/{{ multus_img }}" - command: - - "cp" - - "/usr/src/multus-cni/bin/multus" - - "/host/opt/cni/bin/multus" + command: ["/install_multus"] + args: + - "--type" + - "thin" resources: requests: cpu: "0" @@ -281,6 +277,18 @@ spec: - name: cnibin mountPath: /host/opt/cni/bin mountPropagation: Bidirectional + # 00-multus.conf is generated with a nested delegate misconfiguration. + # Use initcontainer 'delete-multus-conf' to re-generate 00-multus.conf on startup. + # This upstream bug was found in v4.0.2. + - name: delete-multus-conf + image: "alpine" + command: ["rm"] + args: + - "-f" + - "/host/etc/cni/net.d/00-multus.conf" + volumeMounts: + - name: cni + mountPath: "/host/etc/cni/net.d" terminationGracePeriodSeconds: 10 volumes: - name: cni @@ -294,4 +302,4 @@ spec: name: multus-cni-config.v1 items: - key: cni-conf.json - path: 05-multus.conf + path: 00-multus.conf diff --git a/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.26.1/sriov-cni.yaml.j2 b/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.28.4/sriov-cni.yaml.j2 similarity index 96% rename from playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.26.1/sriov-cni.yaml.j2 rename to playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.28.4/sriov-cni.yaml.j2 index 74eea9695..9d157d191 100644 --- a/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.26.1/sriov-cni.yaml.j2 +++ b/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.28.4/sriov-cni.yaml.j2 @@ -1,4 +1,4 @@ -# SRIOV-CNI Release v2 +# SRIOV-CNI Version v2.7.0 # Based on: # https://raw.githubusercontent.com/k8snetworkplumbingwg/sriov-cni/v2.7.0/images/k8s-v1.16/ # sriov-cni-daemonset.yaml @@ -17,7 +17,7 @@ # - For k8s 1.19, the matchLabels are the same as the k8s 1.18 labels to # allow a rolling update to succeed. # -# Copyright (c) 2023 Wind River Systems, Inc. +# Copyright (c) 2024 Wind River Systems, Inc. # # SPDX-License-Identifier: Apache-2.0 # @@ -75,3 +75,4 @@ spec: - name: cnibin hostPath: path: {{ kubelet_cni_bin_dir }} + diff --git a/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.26.1/sriov-plugin.yaml.j2 b/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.28.4/sriov-plugin.yaml.j2 similarity index 87% rename from playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.26.1/sriov-plugin.yaml.j2 rename to playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.28.4/sriov-plugin.yaml.j2 index 7bf73e26a..4e738aac8 100644 --- a/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.26.1/sriov-plugin.yaml.j2 +++ b/playbookconfig/src/playbooks/roles/common/bringup-kubemaster/templates/k8s-v1.28.4/sriov-plugin.yaml.j2 @@ -1,10 +1,10 @@ -# SRIOV device CNI plugin version 3.5.1 +# SRIOV device CNI plugin version 3.6.2 # Based on: -# https://raw.githubusercontent.com/k8snetworkplumbingwg/sriov-network-device-plugin/v3.5.1/ -# deployments/k8s-v1.16/sriovdp-daemonset.yaml +# https://raw.githubusercontent.com/k8snetworkplumbingwg/sriov-network-device-plugin/v3.6.2/ +# deployments/sriovdp-daemonset.yaml # # This file is licensed under Apache 2.0. You can obtain a copy of the license at: -# https://github.com/k8snetworkplumbingwg/sriov-network-device-plugin/blob/v3.5.1/LICENSE +# https://github.com/k8snetworkplumbingwg/sriov-network-device-plugin/blob/v3.6.2/LICENSE # # The following modifications have been made: # @@ -21,7 +21,7 @@ # allow a rolling update to succeed. # - Set CPU requests to 0 # -# Copyright (c) 2023 Wind River Systems, Inc. +# Copyright (c) 2024 Wind River Systems, Inc. # # SPDX-License-Identifier: Apache-2.0 # @@ -59,7 +59,7 @@ spec: spec: hostNetwork: true nodeSelector: - beta.kubernetes.io/arch: amd64 + kubernetes.io/arch: amd64 sriovdp: enabled tolerations: - operator: Exists @@ -87,6 +87,9 @@ spec: - name: devicesock mountPath: /var/lib/kubelet/device-plugins/ readOnly: false + - name: plugins-registry + mountPath: /var/lib/kubelet/plugins_registry/ + readOnly: false - name: log mountPath: /var/log - name: config @@ -98,6 +101,9 @@ spec: - name: devicesock hostPath: path: /var/lib/kubelet/device-plugins/ + - name: plugins-registry + hostPath: + path: /var/lib/kubelet/plugins_registry/ - name: log hostPath: path: /var/log @@ -109,3 +115,4 @@ spec: hostPath: path: /etc/pcidp/config.json type: File + diff --git a/playbookconfig/src/playbooks/roles/common/load-images-information/vars/k8s-v1.24.4/system-images.yml b/playbookconfig/src/playbooks/roles/common/load-images-information/vars/k8s-v1.24.4/system-images.yml index 8cecfd2a7..90e2d73d2 100644 --- a/playbookconfig/src/playbooks/roles/common/load-images-information/vars/k8s-v1.24.4/system-images.yml +++ b/playbookconfig/src/playbooks/roles/common/load-images-information/vars/k8s-v1.24.4/system-images.yml @@ -2,12 +2,12 @@ # System images that are pre-pulled and pushed to local registry n3000_opae_img: docker.io/starlingx/n3000-opae:stx.8.0-v1.0.2 kubernetes_entrypoint_img: quay.io/stackanetes/kubernetes-entrypoint:v0.3.1 -calico_cni_img: quay.io/calico/cni:v3.24.0 -calico_node_img: quay.io/calico/node:v3.24.0 -calico_kube_controllers_img: quay.io/calico/kube-controllers:v3.24.0 -multus_img: ghcr.io/k8snetworkplumbingwg/multus-cni:v3.9.2 -sriov_cni_img: ghcr.io/k8snetworkplumbingwg/sriov-cni:v2.6.3 -sriov_network_device_img: ghcr.io/k8snetworkplumbingwg/sriov-network-device-plugin:v3.5.1 +calico_cni_img: quay.io/calico/cni:v3.26.4 +calico_node_img: quay.io/calico/node:v3.26.4 +calico_kube_controllers_img: quay.io/calico/kube-controllers:v3.26.4 +multus_img: ghcr.io/k8snetworkplumbingwg/multus-cni:v4.0.2 +sriov_cni_img: ghcr.io/k8snetworkplumbingwg/sriov-cni:v2.7.0 +sriov_network_device_img: ghcr.io/k8snetworkplumbingwg/sriov-network-device-plugin:v3.6.2 # Nginx images nginx_ingress_controller_img: registry.k8s.io/ingress-nginx/controller:v1.9.3 nginx_kube_webhook_certgen_img: registry.k8s.io/ingress-nginx/kube-webhook-certgen:v20231011-8b53cabe0 diff --git a/playbookconfig/src/playbooks/roles/common/load-images-information/vars/k8s-v1.25.3/system-images.yml b/playbookconfig/src/playbooks/roles/common/load-images-information/vars/k8s-v1.25.3/system-images.yml index 2b5b83673..6a762da48 100644 --- a/playbookconfig/src/playbooks/roles/common/load-images-information/vars/k8s-v1.25.3/system-images.yml +++ b/playbookconfig/src/playbooks/roles/common/load-images-information/vars/k8s-v1.25.3/system-images.yml @@ -2,12 +2,12 @@ # System images that are pre-pulled and pushed to local registry n3000_opae_img: docker.io/starlingx/n3000-opae:stx.8.0-v1.0.2 kubernetes_entrypoint_img: quay.io/stackanetes/kubernetes-entrypoint:v0.3.1 -calico_cni_img: quay.io/calico/cni:v3.25.0 -calico_node_img: quay.io/calico/node:v3.25.0 -calico_kube_controllers_img: quay.io/calico/kube-controllers:v3.25.0 -multus_img: ghcr.io/k8snetworkplumbingwg/multus-cni:v3.9.3 +calico_cni_img: quay.io/calico/cni:v3.26.4 +calico_node_img: quay.io/calico/node:v3.26.4 +calico_kube_controllers_img: quay.io/calico/kube-controllers:v3.26.4 +multus_img: ghcr.io/k8snetworkplumbingwg/multus-cni:v4.0.2 sriov_cni_img: ghcr.io/k8snetworkplumbingwg/sriov-cni:v2.7.0 -sriov_network_device_img: ghcr.io/k8snetworkplumbingwg/sriov-network-device-plugin:v3.5.1 +sriov_network_device_img: ghcr.io/k8snetworkplumbingwg/sriov-network-device-plugin:v3.6.2 intel_qat_plugin_img: docker.io/intel/intel-qat-plugin:0.26.0 intel_gpu_plugin_img: docker.io/intel/intel-gpu-plugin:0.26.0 intel_gpu_initcontainer_img: docker.io/intel/intel-gpu-initcontainer:0.26.0 diff --git a/playbookconfig/src/playbooks/roles/common/load-images-information/vars/k8s-v1.26.1 b/playbookconfig/src/playbooks/roles/common/load-images-information/vars/k8s-v1.26.1 new file mode 120000 index 000000000..78ecdec70 --- /dev/null +++ b/playbookconfig/src/playbooks/roles/common/load-images-information/vars/k8s-v1.26.1 @@ -0,0 +1 @@ +k8s-v1.28.4 \ No newline at end of file diff --git a/playbookconfig/src/playbooks/roles/common/load-images-information/vars/k8s-v1.27.5 b/playbookconfig/src/playbooks/roles/common/load-images-information/vars/k8s-v1.27.5 index 464eed534..78ecdec70 120000 --- a/playbookconfig/src/playbooks/roles/common/load-images-information/vars/k8s-v1.27.5 +++ b/playbookconfig/src/playbooks/roles/common/load-images-information/vars/k8s-v1.27.5 @@ -1 +1 @@ -k8s-v1.26.1 \ No newline at end of file +k8s-v1.28.4 \ No newline at end of file diff --git a/playbookconfig/src/playbooks/roles/common/load-images-information/vars/k8s-v1.28.4 b/playbookconfig/src/playbooks/roles/common/load-images-information/vars/k8s-v1.28.4 deleted file mode 120000 index 464eed534..000000000 --- a/playbookconfig/src/playbooks/roles/common/load-images-information/vars/k8s-v1.28.4 +++ /dev/null @@ -1 +0,0 @@ -k8s-v1.26.1 \ No newline at end of file diff --git a/playbookconfig/src/playbooks/roles/common/load-images-information/vars/k8s-v1.26.1/system-images.yml b/playbookconfig/src/playbooks/roles/common/load-images-information/vars/k8s-v1.28.4/system-images.yml similarity index 90% rename from playbookconfig/src/playbooks/roles/common/load-images-information/vars/k8s-v1.26.1/system-images.yml rename to playbookconfig/src/playbooks/roles/common/load-images-information/vars/k8s-v1.28.4/system-images.yml index 0a9f7584e..fd0c6b49b 100644 --- a/playbookconfig/src/playbooks/roles/common/load-images-information/vars/k8s-v1.26.1/system-images.yml +++ b/playbookconfig/src/playbooks/roles/common/load-images-information/vars/k8s-v1.28.4/system-images.yml @@ -2,12 +2,12 @@ # System images that are pre-pulled and pushed to local registry n3000_opae_img: docker.io/starlingx/n3000-opae:stx.8.0-v1.0.2 kubernetes_entrypoint_img: quay.io/stackanetes/kubernetes-entrypoint:v0.3.1 -calico_cni_img: quay.io/calico/cni:v3.25.0 -calico_node_img: quay.io/calico/node:v3.25.0 -calico_kube_controllers_img: quay.io/calico/kube-controllers:v3.25.0 -multus_img: ghcr.io/k8snetworkplumbingwg/multus-cni:v3.9.3 +calico_cni_img: quay.io/calico/cni:v3.26.4 +calico_node_img: quay.io/calico/node:v3.26.4 +calico_kube_controllers_img: quay.io/calico/kube-controllers:v3.26.4 +multus_img: ghcr.io/k8snetworkplumbingwg/multus-cni:v4.0.2 sriov_cni_img: ghcr.io/k8snetworkplumbingwg/sriov-cni:v2.7.0 -sriov_network_device_img: ghcr.io/k8snetworkplumbingwg/sriov-network-device-plugin:v3.5.1 +sriov_network_device_img: ghcr.io/k8snetworkplumbingwg/sriov-network-device-plugin:v3.6.2 intel_qat_plugin_img: docker.io/intel/intel-qat-plugin:0.26.0 intel_gpu_plugin_img: docker.io/intel/intel-gpu-plugin:0.26.0 intel_gpu_initcontainer_img: docker.io/intel/intel-gpu-initcontainer:0.26.0