Update Mellanox plugin UI section for Fuel 8.0
Over ConnectX-3 / ConnectX-3 pro HCA Change-Id: Ic68475eea0510dced767b8ee57b120842db0b61b
This commit is contained in:
Aviram Bar-Haim
parent
6c010bb84f
commit
c042b9a495
|
|
@ -1,52 +1,22 @@
|
|||
attributes:
|
||||
metadata:
|
||||
group: 'other'
|
||||
notes:
|
||||
type: "textarea"
|
||||
label: "Important notes:"
|
||||
weight: 5
|
||||
extra_priority: null
|
||||
value: |
|
||||
To use Mellanox High Performance features,
|
||||
you have to complete the following prerequisites prior to the deployment:
|
||||
- For Ethernet deployment:
|
||||
* Configure the Switch ports to Ethernet mode.
|
||||
* Configure the desired VLANs for each port.
|
||||
- For InfiniBand deployment:
|
||||
* Configure the Switch ports to InfiniBand mode.
|
||||
* Configure a Subnet Manager (SM) on the switch or on a node in the cluster,
|
||||
as described in the User manual.
|
||||
* Reboot bootstrap nodes using the 'reboot_bootstrap_nodes' script, from
|
||||
the Fuel master, in order to load eIPoIB hardware discovery support.
|
||||
- After the interfaces discovery, perform the following:
|
||||
* Set the relevant networks to work over Mellanox interfaces, in the
|
||||
interfaces configuration in the Nodes tab.
|
||||
* Run network verification, after configuring the desired network subnets
|
||||
and VLAN segmentations.
|
||||
description: "For more information: https://community.mellanox.com/docs/DOC-2374"
|
||||
iser:
|
||||
value: false
|
||||
label: "iSER protocol for volumes (Cinder)"
|
||||
description: "High Performance Block Storage: Cinder volumes over iSER protocol (iSCSI over RDMA) which use a dedicated Virtual Function for the storage network. This feature requires SR-IOV capabilities in the NIC, when deploying over Ethernet."
|
||||
weight: 11
|
||||
type: "checkbox"
|
||||
restrictions:
|
||||
- condition: "settings:storage.volumes_lvm.value != true or settings:common.libvirt_type.value != 'kvm'"
|
||||
message: "For iSER support in Cinder, Cinder LVM over iSCSI should be enabled and hypervisor type should be KVM."
|
||||
sriov:
|
||||
value: false
|
||||
label: "Neutron SR-IOV Mechanism driver"
|
||||
weight: 60
|
||||
label: "Support SR-IOV direct port creation in private VLAN networks (Neutron)"
|
||||
weight: 11
|
||||
type: "checkbox"
|
||||
description: "If selected, Neutron SRIOV mechanism driver will be configured, to enable SR-IOV capabilities."
|
||||
description: |
|
||||
If selected, a Neutron SR-IOV mechanism driver will be configured, to enable SR-IOV capabilities using Neutron direct port.
|
||||
In case NEO SDN Mechanism driver is not used for private network VLAN provisioning:
|
||||
In Ethernet mode, switch side ports has to be pre configured with the required VLAN range.
|
||||
In Infinband mode, the Subnet Manager partitions.conf file has to include the private network converstions of VLAN to PKey.
|
||||
restrictions:
|
||||
- condition: "settings:common.libvirt_type.value != 'kvm' or not (cluster:net_provider == 'neutron' and networking_parameters:segmentation_type == 'vlan')"
|
||||
message: "For Mellanox SR-IOV support in neutron, hypervisor type should be KVM and the environment networking should be based on Neutron with VLAN segmentation."
|
||||
message: "For Mellanox SR-IOV support in Neutron, hypervisor type should be KVM and the environment networking should be based on Neutron with VLAN segmentation."
|
||||
num_of_vfs:
|
||||
value: "16"
|
||||
label: "Number of virtual NICs"
|
||||
description: "Note that one virtual function might be reserved to the storage network, in case of choosing iSER."
|
||||
weight: 70
|
||||
weight: 12
|
||||
type: "text"
|
||||
regex:
|
||||
source: "^(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)$"
|
||||
|
|
@ -54,12 +24,83 @@ attributes:
|
|||
restrictions:
|
||||
- condition: "settings:mellanox-plugin.sriov.value == false"
|
||||
message: "In order to change the number of virtual NICs, Neutron SR-IOV plugin should be checked."
|
||||
|
||||
mlnx_qos:
|
||||
value: false
|
||||
label: "Support quality of service over VLAN networks and ports (Neutron)"
|
||||
description: |
|
||||
If selected, Neutron "Quality of service" (QoS) will be enabled for VLAN networks and ports over Mellanox HCAs.
|
||||
This feature is supported in Ethernet mode only.
|
||||
weight: 30
|
||||
type: "checkbox"
|
||||
restrictions:
|
||||
- condition: "settings:common.libvirt_type.value != 'kvm' or not (cluster:net_provider == 'neutron' and networking_parameters:segmentation_type == 'vlan')"
|
||||
message: "For Mellanox QoS support in Neutron, hypervisor type should be KVM and the environment networking should be based on Neutron with VLAN segmentation."
|
||||
|
||||
use_mlnx_neo:
|
||||
value: false
|
||||
label: "Support NEO SDN controller auto VLAN Provisioning (Neutron)"
|
||||
weight: 40
|
||||
type: "checkbox"
|
||||
description: |
|
||||
If selected, Mellanox NEO Mechanism driver will be used in order to support Auto switch VLAN or SM Pkeys provisioning.
|
||||
restrictions:
|
||||
- condition: "settings:common.libvirt_type.value != 'kvm' or not (cluster:net_provider == 'neutron' and networking_parameters:segmentation_type == 'vlan')"
|
||||
message: "For NEO SDN auto VLAN provisioning, hypervisor type should be KVM and the environment networking should be based on Neutron with VLAN segmentation."
|
||||
mlnx_neo_ip:
|
||||
value: ""
|
||||
label: "NEO IP"
|
||||
weight: 41
|
||||
type: "text"
|
||||
regex:
|
||||
source: '^(((25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.){3}(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?))$'
|
||||
error: "Invalid IP address"
|
||||
restrictions:
|
||||
- condition: "settings:mellanox-plugin.use_mlnx_neo.value == false"
|
||||
message: "In order to insert NEO SDN Controller IP, Mellanox NEO auto VLAN provisioning has to be checked."
|
||||
mlnx_neo_user:
|
||||
value: "admin"
|
||||
label: "NEO username"
|
||||
weight: 42
|
||||
type: "text"
|
||||
restrictions:
|
||||
- condition: "settings:mellanox-plugin.use_mlnx_neo.value == false"
|
||||
message: "In order to insert NEO SDN Controller username, Mellanox NEO auto VLAN provisioning has to be checked."
|
||||
mlnx_neo_password:
|
||||
value: "123456"
|
||||
label: "NEO password"
|
||||
weight: 43
|
||||
type: "text"
|
||||
restrictions:
|
||||
- condition: "settings:mellanox-plugin.use_mlnx_neo.value == false"
|
||||
message: "In order to insert NEO SDN Controller password, Mellanox NEO auto VLAN provisioning has to be checked."
|
||||
|
||||
vxlan_offloading:
|
||||
value: false
|
||||
label: "VXLAN Offloading"
|
||||
description: "By using Mellanox hardware, VXLAN offloading is achieved with better performance and significant CPU overhead reduction. "
|
||||
weight: 11
|
||||
label: "Support VXLAN Offloading (Neutron)"
|
||||
description: |
|
||||
If selected, Mellanox hardware will be used to achieve a better performance and significant CPU overhead reduction
|
||||
using VxLAN traffic offloading. This feature is supported in Ethernet mode only.
|
||||
weight: 50
|
||||
type: "checkbox"
|
||||
restrictions:
|
||||
- condition: "not (cluster:net_provider == 'neutron' and networking_parameters:segmentation_type == 'tun')"
|
||||
message: "For VXLAN offloading, network should be neutron with tunnling segmentation."
|
||||
|
||||
iser:
|
||||
value: false
|
||||
label: "iSER protocol for volumes (Cinder)"
|
||||
description: |
|
||||
High Performance Block Storage: Cinder volumes over iSER protocol (iSCSI over RDMA).
|
||||
In Ethernet mode, a dedicated Virtual Function will be reserved for a storage endpoint, and the priority flow control
|
||||
has to be enabled on the switch side port.
|
||||
In Infiniband mode, the IPoIB parent interface of the network storage interface will be used as the storage endpoint.
|
||||
|
||||
|
||||
For more information about Mellanox NEO installation and usage: https://community.mellanox.com/docs/DOC-2155
|
||||
For more information about Mellanox Fuel 8.0 plugin configurations: https://community.mellanox.com/docs/DOC-2435
|
||||
weight: 60
|
||||
type: "checkbox"
|
||||
restrictions:
|
||||
- condition: "settings:storage.volumes_lvm.value != true or settings:common.libvirt_type.value != 'kvm'"
|
||||
message: "For iSER support in Cinder, Cinder LVM over iSCSI should be enabled and hypervisor type should be KVM."
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@ name: mellanox-plugin
|
|||
title: Mellanox Openstack features
|
||||
|
||||
# Plugin version
|
||||
version: 2.0.28
|
||||
version: 2.0.29
|
||||
|
||||
# Description
|
||||
description: Enable features over Mellanox hardware
|
||||
|
|
|
|||
Loading…
Reference in New Issue