4.4 KiB

Raw Permalink Blame History

instack-undercloud virt setup

You should select a host machine with at least 12G of memory and 200G disk space. The virt setup creates 5 virtual machines consisting of 2G of memory and 30G of disk space each. If you do not plan to deploy Block Storage or Swift Storage nodes, you can delete those virtual machines and require less space accordingly. Most of the virtual machine disk files are thinly provisioned and won't take up the full 30G. The undercloud is not thinly provisioned and is completely pre-allocated.

If you're connecting to the virt host remotely from ssh, you will need to use the -t flag to force pseudo-tty allocation or enable notty via a $USER.notty file.

Do not use the root user for executing any instack-undercloud scripts. Some programs of libguestfs-tools are not designed to work with the root user. All of the instack-undercloud scripts were developed and tested by using a normal user with sudo privileges.

Some recommended default environment variables before starting:

    # disk size in GB to set for each virtual machine created
    export NODE_DISK=30

    # memory in MB allocated for each virtual machine created
    export NODE_MEM=4096

    # Operating system distribution to set for each virtual machine created
    export NODE_DIST=fedora

    # CPU count assigned to each virtual machine created
    export NODE_CPU=1

    # 64 bit architecture
    export NODE_ARCH=amd64

Add export of LIVBIRT_DEFAULT_URI to your bashrc file.

 echo 'export LIBVIRT_DEFAULT_URI="qemu:///system"' >> ~/.bashrc

Install the openstack-m repository

 sudo yum -y install http://repos.fedorapeople.org/repos/openstack-m/openstack-m/openstack-m-release-icehouse-2.noarch.rpm

Enable the fedora-openstack-m-testing yum repository.

 sudo yum -y install yum-utils
 sudo yum-config-manager --enable fedora-openstack-m-testing

Install instack-undercloud

 sudo yum -y install instack-undercloud

Install required dependencies for virt
```
 sudo yum install -y libguestfs-tools
 source /usr/libexec/openstack-tripleo/devtest_variables.sh
 tripleo install-dependencies
```
After running this command, you will need to log out and log back in for the changes to be applied. If you plan to use virt-manager or boxes to visually manage the virtual machines created in the next step, this would be a good time to install those tools now.
Run script to setup your virtual environment. If you'd like to customize the root password, export an environment variable UNDERCLOUD_ROOT_PASSWORD. If you prefer to customize the name of the Undercloud virtual machine to something besides instack, export the environment variable UNDERCLOUD_VM_NAME.
```
 export NODE_DISK=30
 instack-virt-setup
```
You should now have a vm called instack that you can use for the instack-undercloud installation that contains a minimal install of Fedora 20 x86_64. The instack vm contains a user "stack" that uses the password "stack" and is granted password-less sudo privileges. The root password is displayed in the standard output unless you set it using UNDERCLOUD_ROOT_PASSWORD.
Get IP Address

You'll need to start the instack virtual machine and obtain its IP address. You can use your preferred virtual machine management software or follow the steps below.
```
 virsh start instack
 cat /var/lib/libvirt/dnsmasq/default.leases | grep $(tripleo get-vm-mac instack) | awk '{print $3;}'
```
Get MAC addresses

When setting up the undercloud on the instack virtual machine, you will need the MAC addresses of the baremetal node virtual machines. Use the following command to obtain the list of addresses you can add to your deploy-overcloudrc file later.
```
  for i in $(seq 0 3); do echo -n $(tripleo get-vm-mac baremetal_$i) " "; done; echo
```
Log into your instack virtual machine. Create the virtual-power-key and copy it to the virt host. The user in ssh-copy-id should match the VIRTUAL_POWER_USER and the ip should match the VIRTUAL_POWER_HOST in your instack.answers file.
```
 ssh-keygen -t rsa -N '' -C virtual-power-key -f virtual-power-key
 ssh-copy-id -i virtual-power-key.pub stack@192.168.122.1
```

Return to README-packages to continue with installing the undercloud on the instack vm.

4.4 KiB Raw Permalink Blame History

instack-undercloud virt setup

4.4 KiB

Raw Permalink Blame History