25 KiB

Raw Blame History

CephFS driver

The CephFS driver enables manila to export shared filesystems backed by Ceph's File System (CephFS) using either the Ceph network protocol or NFS protocol. Guests require a native Ceph client or an NFS client in order to mount the filesystem.

When guests access CephFS using the native Ceph protocol, access is controlled via Ceph's cephx authentication system. If a user requests share access for an ID, Ceph creates a corresponding Ceph auth ID and a secret key if they do not already exist, and authorizes the ID to access the share. The client can then mount the share using the ID and the secret key. To learn more about configuring Ceph clients to access the shares created using this driver, please see the Ceph documentation

And when guests access CephFS through NFS, an NFS-Ganesha server (or CephFS NFS service) mediates access to CephFS. The driver enables access control by managing the NFS-Ganesha server's exports.

Supported Operations

The following operations are supported with CephFS backend:

Create, delete, update and list share
Allow/deny access to share
- Only cephx access type is supported for CephFS native protocol.
- Only ip access type is supported for NFS protocol.
- read-only and read-write access levels are supported.
Extend/shrink share
Create, delete, update and list snapshot
Create, delete, update and list share groups
Delete and list share group snapshots

Important

Share group snapshot creation is no longer supported in mainline CephFS. This feature has been removed from manila W release.

Prerequisites

Important

A manila share backed by CephFS is only as good as the underlying filesystem. Take care when configuring your Ceph cluster, and consult the latest guidance on the use of CephFS in the Ceph documentation.

Ceph testing matrix

As Ceph and Manila continue to grow, it is essential to test and support combinations of releases supported by both projects. However, there is little community bandwidth to cover all of them. For simplicity sake, we are focused on testing (and therefore supporting) the current Ceph active releases. Check out the list of Ceph active releases here.

Below is the current state of testing for Ceph releases with this project. Adjacent components such as devstack-plugin-ceph and tripleo are added to the table below. Contributors to those projects can determine what versions of ceph are tested and supported with manila by those components; however, their state is presented here for ease of access.

OpenStack release	Manila	devstack-plugin-ceph
Wallaby	Pacific	Pacific
Xena	Pacific	Quincy
Yoga	Quincy	Quincy
Zed	Quincy	Quincy
2023.1 ("Antelope")	Quincy	Quincy
2023.2 ("Bobcat")	Quincy	Reef
2024.1 ("Caracal")	Reef	Reef
2024.2 ("Dalmation")	Reef	Reef

Additionally, it is expected that the version of the Ceph client available to manila is aligned with the Ceph server version. Mixing server and client versions is strongly unadvised.

In case of using the NFS Ganesha driver, it's also a good practice to use the versions that align with the Ceph version of choice.

Common Prerequisites

A Ceph cluster with a filesystem configured (See Create ceph filesystem on how to create a filesystem.)
python3-rados and python3-ceph-argparse packages installed in the servers running the manila-share service.
Network connectivity between your Ceph cluster's public network and the servers running the manila-share service.

For CephFS native shares

Ceph client installed in the guest
Network connectivity between your Ceph cluster's public network and guests. See security_cephfs_native.

For CephFS NFS shares

There are two ways for the CephFS driver to provision and export CephFS shares via NFS. Both ways involve the user space NFS service, NFS-Ganesha.

Since the Quincy release of Ceph, there is support to create and manage an NFS-Ganesha based "ceph nfs" service. This service can be clustered, i.e., it can have one or more active NFS services working in tandem to provide high availability. You can also optionally deploy an ingress service to front-end this cluster natively using ceph's management commands. Doing this allows ease of management of an NFS service to serve CephFS shares securely as well provides an active/active high availability configuration for it which may be highly desired in production environments. Please follow the ceph documentation <https://docs.ceph .com/en/latest/cephadm/services/nfs/> for instructions to deploy a cluster with necessary configuration. With an NFS cluster, the CephFS driver uses Ceph mgr APIs to create and manipulate exports when share access rules are created and deleted.

The CephFS driver can also work with Manila's in-built NFS-Ganesha driver to interface with an independent, standalone NFS-Ganesha service that is not orchestrated via Ceph. Unlike when under Ceph's management, the high availability of the NFS server must be externally managed. Typically deployers use Pacemaker/Corosync for providing active/passive availability for such a standalone NFS-Ganesha service. See the NFS-Ganesha documentation for more information. The CephFS driver can be configured to store the NFS recovery data in a RADOS pool to facilitate the server's recovery if the service is shut down and respawned due to failures/outages.

Since the Antelope (2023.1) release of OpenStack Manila, we recommend the use of ceph orchestrator deployed NFS service. The use of a standalone NFS-Ganesha service is deprecated as of the Caracal release (2024.1) and support will be removed in a future release.

The CephFS driver does not specify an NFS protocol version when setting up exports. This is to allow the deployer to configure the appropriate NFS protocol version/s directly in NFS-Ganesha configuration. NFS-Ganesha enables both NFS version 3 and version 4.x by virtue of default configuration. Please note that there are many differences at the protocol level between NFS versions. Many deployers enable only NFS version 4.1 (and beyond) to take advantage of enhancements in locking, security and ease of port management. Be aware that not all clients support the latest versions of NFS.

The pre-requisites for NFS are:

NFS client installed in the guest.
Network connectivity between your Ceph cluster's public network and NFS-Ganesha service.
Network connectivity between your NFS-Ganesha service and the client mounting the manila share.
Appropriate firewall rules to permit port access between the clients and the NFS-Ganesha service.

If you're deploying a standalone NFS-Ganesha service, we recommend using the latest version of NFS-Ganesha. The server must be deployed with at least NFS-Ganesha version 3.5.

Authorizing the driver to communicate with Ceph

Capabilities required for the Ceph manila identity have changed from the Wallaby release. The Ceph manila identity configured no longer needs any MDS capability. The MON and OSD capabilities can be reduced as well. However new MGR capabilities are now required. If not accorded, the driver cannot communicate to the Ceph Cluster.

Important

The driver in the Wallaby (or later) release requires a Ceph identity with a different set of Ceph capabilities when compared to the driver in a pre-Wallaby release.

When upgrading to Wallaby you'll also have to update the capabilities of the Ceph identity used by the driver (refer to Ceph user capabilities docs) E.g. a native driver that already uses client.manila Ceph identity, issue command ceph auth caps client.manila mon 'allow r' mgr 'allow rw'

If you are deploying the CephFS driver with Native CephFS or using an NFS service deployed with ceph management commands, the auth ID should be set as follows:

ceph auth get-or-create client.manila -o manila.keyring \
  mgr 'allow rw' \
  mon 'allow r'

If you're deploying the CephFS NFS driver with a standalone NFS-Ganesha service, we use a specific pool to store exports (configurable with the config option "ganesha_rados_store_pool_name"). The client.manila ceph user requires permission to access this pool. So, the auth ID should be set as follows:

ceph auth get-or-create client.manila -o manila.keyring \
  osd 'allow rw pool=<ganesha_rados_store_pool_name>" \
  mgr 'allow rw' \
  mon 'allow r'

manila.keyring, along with your ceph.conf file, will then need to be placed on the server running the manila-share service.

Important

To communicate with the Ceph backend, a CephFS driver instance (represented as a backend driver section in manila.conf) requires its own Ceph auth ID that is not used by other CephFS driver instances running in the same controller node.

In the server running the manila-share service, you can place the ceph.conf and manila.keyring files in the /etc/ceph directory. Set the same owner for the manila-share process and the manila.keyring file. Add the following section to the ceph.conf file.

[client.manila]
client mount uid = 0
client mount gid = 0
log file = /opt/stack/logs/ceph-client.manila.log
admin socket = /opt/stack/status/stack/ceph-$name.$pid.asok
keyring = /etc/ceph/manila.keyring

It is advisable to modify the Ceph client's admin socket file and log file locations so that they are co-located with manila services's pid files and log files respectively.

Enabling snapshot support in Ceph backend

From Ceph Nautilus, all new filesystems created on Ceph have snapshots enabled by default. If you've upgraded your ceph cluster and want to enable snapshots on a pre-existing filesystem, you can do so:

ceph fs set {fs_name} allow_new_snaps true

Configuring CephFS backend in manila.conf

Add CephFS to enabled_share_protocols (enforced at manila api layer). In this example we leave NFS and CIFS enabled, although you can remove these if you will only use a CephFS backend:

enabled_share_protocols = NFS,CIFS,CEPHFS

Create a section like this to define a CephFS native backend:

[cephfsnative1]
driver_handles_share_servers = False
share_backend_name = CEPHFSNATIVE1
share_driver = manila.share.drivers.cephfs.driver.CephFSDriver
cephfs_conf_path = /etc/ceph/ceph.conf
cephfs_protocol_helper_type = CEPHFS
cephfs_auth_id = manila
cephfs_cluster_name = ceph
cephfs_filesystem_name = cephfs

Set driver-handles-share-servers to False as the driver does not manage the lifecycle of share-servers. For the driver backend to expose shares via the native Ceph protocol, set cephfs_protocol_helper_type to CEPHFS.

Then edit enabled_share_backends to point to the driver's backend section using the section name. In this example we are also including another backend ("generic1"), you would include whatever other backends you have configured.

Finally, edit cephfs_filesystem_name with the name of the Ceph filesystem (also referred to as a CephFS volume) you want to use. If you have more than one Ceph filesystem in the cluster, you need to set this option.

enabled_share_backends = generic1, cephfsnative1

Note

Prior to configuring the Manila CephFS driver to use NFS, you must have installed and configured NFS-Ganesha. If you're using ceph orchestrator to create the NFS-Ganesha service and manage it alongside ceph, refer to the Ceph documentation on how to setup this service. If you're using an independently deployed standalone NFS-Ganesha service, refer to the NFS-Ganesha setup guide.

Add NFS to enabled_share_protocols if it's not already there:

enabled_share_protocols = NFS,CIFS,CEPHFS

Create a section to define a CephFS NFS share backend. The following is an example for using a ceph orchestrator deployed NFS service:

[cephfsnfs1]
driver_handles_share_servers = False
share_backend_name = CEPHFSNFS1
share_driver = manila.share.drivers.cephfs.driver.CephFSDriver
cephfs_protocol_helper_type = NFS
cephfs_conf_path = /etc/ceph/ceph.conf
cephfs_auth_id = manila
cephfs_cluster_name = ceph
cephfs_filesystem_name = cephfs
cephfs_nfs_cluster_id = mycephfsnfscluster

The following is an example for using an independently deployed standalone NFS-Ganesha service:

[cephfsnfs1]
driver_handles_share_servers = False
share_backend_name = CEPHFSNFS1
share_driver = manila.share.drivers.cephfs.driver.CephFSDriver
cephfs_protocol_helper_type = NFS
cephfs_conf_path = /etc/ceph/ceph.conf
cephfs_auth_id = manila
cephfs_cluster_name = ceph
cephfs_filesystem_name = cephfs
cephfs_ganesha_server_is_remote= False
cephfs_ganesha_server_ip = 172.24.4.3
ganesha_rados_store_enable = True
ganesha_rados_store_pool_name = cephfs_data

The following options are set in the driver backend sections above:

driver-handles-share-servers to False as the driver does not manage the lifecycle of share-servers.
cephfs_protocol_helper_type to NFS to allow NFS protocol access to the CephFS backed shares.
ceph_auth_id to the ceph auth ID created in authorize_ceph_driver.
cephfs_nfs_cluster_id - Use this option with a ceph orchestrator deployed clustered NFS service. Set it to the name of the cluster created with the ceph orchestrator.
cephfs_ganesha_server_is_remote - Use this option with a standalone NFS-Ganesha service. Set it to False if the NFS-ganesha server is co-located with the manila-share service. If the NFS-Ganesha server is remote, then set the options to True, and set other options such as cephfs_ganesha_server_ip, cephfs_ganesha_server_username, and cephfs_ganesha_server_password (or cephfs_ganesha_path_to_private_key) to allow the driver to manage the NFS-Ganesha export entries over SSH.
cephfs_ganesha_server_ip - Use this option with a standalone NFS-Ganesha service. Set it to the ganesha server IP address. It is recommended to set this option even if the ganesha server is co-located with the manila-share service.
ganesha_rados_store_enable - Use this option with a standalone NFS-Ganesha service. Set it to True or False. Setting this option to True allows NFS Ganesha to store exports and its export counter in Ceph RADOS objects. We recommend setting this to True and using a RADOS object since it is useful for highly available NFS-Ganesha deployments to store their configuration efficiently in an already available distributed storage system.
ganesha_rados_store_pool_name - Use this option with a standalone NFS-Ganesha service. Set it to the name of the RADOS pool you have created for use with NFS-Ganesha. Set this option only if also setting the ganesha_rados_store_enable option to True. If you want to use one of the backend CephFS's RADOS pools, then using CephFS's data pool is preferred over using its metadata pool.

Edit enabled_share_backends to point to the driver's backend section using the section name, cephfsnfs1.

enabled_share_backends = generic1, cephfsnfs1

Space considerations

The CephFS driver reports total and free capacity available across the Ceph cluster to manila to allow provisioning. All CephFS shares are thinly provisioned, i.e., empty shares do not consume any significant space on the cluster. The CephFS driver does not allow controlling oversubscription via manila. So, as long as there is free space, provisioning will continue, and eventually this may cause your Ceph cluster to be over provisioned and you may run out of space if shares are being filled to capacity. It is advised that you use Ceph's monitoring tools to monitor space usage and add more storage when required in order to honor space requirements for provisioned manila shares. You may use the driver configuration option reserved_share_percentage to prevent manila from filling up your Ceph cluster, and allow existing shares to grow.

Creating shares

The default share type may have driver_handles_share_servers set to True. Configure a share type suitable for CephFS native share:

openstack share type create cephfsnativetype false
openstack share type set cephfsnativetype --extra-specs vendor_name=Ceph storage_protocol=CEPHFS

Then create a share,

openstack share create --share-type cephfsnativetype --name cephnativeshare1 cephfs 1

Note the export location of the share:

openstack share export location list cephnativeshare1

The export location of the share contains the Ceph monitor (mon) addresses and ports, and the path to be mounted. It is of the form, {mon ip addr:port}[,{mon ip addr:port}]:{path to be mounted}

Configure a share type suitable for CephFS NFS share:

openstack share type create cephfsnfstype false
openstack share type set cephfsnfstype --extra-specs vendor_name=Ceph storage_protocol=NFS

Then create a share:

openstack share create --share-type cephfsnfstype --name cephnfsshare1 nfs 1

Note the export location of the share:

openstack share export location list cephnfsshare1

The export location of the share contains the IP address of the NFS-Ganesha server and the path to be mounted. It is of the form, {NFS-Ganesha server address}:{path to be mounted}

Allowing access to shares

Allow Ceph auth ID alice access to the share using cephx access type.

openstack share access create cephnativeshare1 cephx alice

Note the access status, and the access/secret key of alice.

openstack share access list cephnativeshare1

Allow a guest access to the share using ip access type.

openstack share access create cephnfsshare1 ip 172.24.4.225

Mounting CephFS shares

Using the secret key of the authorized ID alice create a keyring file, alice.keyring like:

[client.alice]
        key = AQA8+ANW/4ZWNRAAOtWJMFPEihBA1unFImJczA==

Using the mon IP addresses from the share's export location, create a configuration file, ceph.conf like:

[client]
        client quota = true
        mon host = 192.168.1.7:6789, 192.168.1.8:6789, 192.168.1.9:6789

Finally, mount the filesystem, substituting the filenames of the keyring and configuration files you just created, and substituting the path to be mounted from the share's export location:

sudo ceph-fuse ~/mnt \
--id=alice \
--conf=./ceph.conf \
--keyring=./alice.keyring \
--client-mountpoint=/volumes/_nogroup/4c55ad20-9c55-4a5e-9233-8ac64566b98c

If you have the ceph-common package installed in the client host, you can use the kernel client to mount CephFS shares.

Important

If you choose to use the kernel client rather than the FUSE client the share size limits set in manila may not be obeyed in versions of kernel older than 4.17 and Ceph versions older than mimic. See the quota limitations documentation to understand CephFS quotas.

The mount command is as follows:

mount -t ceph {mon1 ip addr}:6789,{mon2 ip addr}:6789,{mon3 ip addr}:6789:/ \
    {mount-point} -o name={access-id},secret={access-key}

With our earlier examples, this would be:

mount -t ceph 192.168.1.7:6789, 192.168.1.8:6789, 192.168.1.9:6789:/ \
    /volumes/_nogroup/4c55ad20-9c55-4a5e-9233-8ac64566b98c \
    -o name=alice,secret='AQA8+ANW/4ZWNRAAOtWJMFPEihBA1unFImJczA=='

In the guest, mount the share using the NFS client and knowing the share's export location.

sudo mount -t nfs 172.24.4.3:/volumes/_nogroup/6732900b-32c1-4816-a529-4d6d3f15811e /mnt/nfs/

Known restrictions

A CephFS driver instance, represented as a backend driver section in manila.conf, requires a Ceph auth ID unique to the backend Ceph Filesystem. Using a non-unique Ceph auth ID will result in the driver unintentionally evicting other CephFS clients using the same Ceph auth ID to connect to the backend.
Snapshots are read-only. A user can read a snapshot's contents from the .snap/{manila-snapshot-id}_{unknown-id} folder within the mounted share.

Security

Each share's data is mapped to a distinct Ceph RADOS namespace. A guest is restricted to access only that particular RADOS namespace. https://docs.ceph.com/en/latest/cephfs/file-layouts/

Security with CephFS native share backend

As the guests need direct access to Ceph's public network, CephFS native share backend is suitable only in private clouds where guests can be trusted.

Configuration Reference

The `manila.share.drivers.cephfs.driver` Module

manila.share.drivers.cephfs.driver

25 KiB Raw Blame History

CephFS driver

Supported Operations

Prerequisites

Ceph testing matrix

Common Prerequisites

For CephFS native shares

For CephFS NFS shares

Authorizing the driver to communicate with Ceph

Enabling snapshot support in Ceph backend

Configuring CephFS backend in manila.conf

Configure CephFS native share backend in manila.conf

Configure CephFS NFS share backend in manila.conf

Space considerations

Creating shares

Create CephFS native share

Create CephFS NFS share

Allowing access to shares

Allow access to CephFS native share

Allow access to CephFS NFS share

Mounting CephFS shares

Mounting CephFS native share using FUSE client

Mounting CephFS native share using Kernel client

Mount CephFS NFS share using NFS client

Known restrictions

Security

Security with CephFS native share backend

Configuration Reference

The manila.share.drivers.cephfs.driver Module

25 KiB

Raw Blame History

The `manila.share.drivers.cephfs.driver` Module